Top 10 Best Small Rig Monitor Holder

Universal Monitor Arm MOUNTUP monitor desk mount perfectly fits most LEDOLEDQLED flat or curved computer screens up to 32 inches, holds 4.4-17.6 lbs, suitable for VESA patterns of 75x75mm 100x100mm. Compatible with ASUS, Acer, Samsung, LG, HP, AOC, Dell, Lenovo, etc., including but not limited to 32 30 28 27 25 24 23 22 21 20 19 17 inch screen.. Full Motion Monitor Stand This single monitor arm offers a wide range of movement. Supports screen rotates 360 for landscape or portrait orientation, swivels 180 to share your display, and tilts up 90down 45 for better viewing. The arm can extend up to 19.27 long, and rise up to 16.3 in height. Easy to find the right viewing angle and position. Tension adjustment is based on the weight of monitor and the gas spring is pre-set to mid-tension, please adjust tension after hanging on monitor.. Easy To Assemble Our monitor VESA desk mount is easy to install with a drill-free c-clampdesk thickness within 0.39''-1.97'' or grommet base mountdesk thickness within 0.39''-3.15'', hole diameter within 0.39''-2.36''. If the thickness of your table is not within this range, please relate with us for suitable C-clamp. Comes with clear manual and mounting hardware needed. Less than 15 minutes from opening box to use.. Free Up Your Desk Space Heavy-duty monitor arm with built-in cable control professionally helping to hide wires. The single monitor stand releases more than 80 desktop space to place office accessories compared to a monitor holder with a large base while creating a more comfortable work environment. More desk space, better workflow. Sturdy Construction Friendly Service The stable gas spring and clampgrommet base are strong and durable enough to ensure the safety and security of your single monitor setup. Backed by MOUNTUP 3-year support..

14 screw interfaceThis camera holder support include 14 screw interfaces. Can be adapted to cameras, webcams, microphones, lights, etc. of this size.. Easy multiple to useIn addition to connecting the camera, without other installation, just put the camera stand on the computer screen and it can be used. It can also be used to support Pad and mobile phone.. Save spaceThe computer top bracket saves desktop space, and at the same time, there is no need to worry about the stability of the tripod. It is also very convenient to carry and store.. Flexible high qualityThe computer screen top camera stand can position adjust by moving horizontally on the computer screen. The angle of the camera can also be controlled by the 360 ball head. The ball head with special threads, has better load-bearing capacity.. Widely usedComputer screen top camera support has multiple uses. Like the live stream, video conferencing, youtube, tiktok, etc..

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2905 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..

FOR MONITOR MOUNT WITH COLD SHOESMALLRIG Monitor Mount 2346 is designed to hold your monitor onto the top of the camera or other mounting systems via a cold shoe adapter, which achieves lightweight design without any accessories. It can be tightened by hands via the thumbscrew. The field monitor mount is compatible with 5 inch and 7 inch monitor. SWIVEL AND TILTThe camera monitor holder enables to swivel 360 sideways and tilt 140 with free-stop in any positions. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios. FIRM LOCKINGThe field monitor holder connects with monitor firmly via a 14-20 screw on the bottom. The size of the thumbscrew head is increased so that its easy to install. Both thumbscrews features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. RUBBER CUSHIONThis SMALLRIG camera monitor mount comes with rubber cushions on top of the holder, which can increase the friction and protects the monitor from scratching. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 inch and 7 inch monitor up to 1.2kg, which makes it lightweight and durable at the same time.

FOR DJI RS 2RSC 2SmallRig Monitor Mount 3026 is specially designed for DJI RS 2RSC 2 gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc.. FIRM LOCKINGThe monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling.. 165 TILT RANGESmallRig 3026 is adjustable for 165 and can be stopped at any angle without tools. With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer.. MULTIPLE MOUNTING OPTIONSThere are two 14-20 threaded holes on top of the monitor mount, and one 14 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount which can be attached with a sound receiver, microphone, light, etc.. HIGH CUSTOMIZATIONMatte surface perfectly matches with the industrial design of stabilizer. Please note the max payload is 1.5kg. .

FOR MONITOR MOUNT PLEASE NOTE The item DOES NOT include the NATO CLAMP. SMALLRIG Monitor Mount 2347 is designed to hold your monitor onto the top of the camera or other mounting systems via a nato clamp, which achieves lightweight design without any accessories. It can be tightened by hands via the thumbscrew. The monitor mount is compatible with 5 inch or 7 inch monitor. SWIVEL AND TILTThe field monitor holder enables to swivel 360 sideways and tilt 150 which allows to hold your monitor onto any position without using tools. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios. FIRM LOCKINGThe camera monitor mount connects with monitor firmly via a 14-20 screw on the bottom. Both thumbscrews features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. RUBBER CUSHIONThis camera monitor holder comes with rubber cushions on top of the holder, which can increase the friction and protects the monitor from scratching. HIGH QUALITYThe robust mount is CNC-Machined Aluminum, which makes it lightweight and durable at the same time. And the max load of this monitor mount is 1.2kg.

FOR FIELD MONITORThe monitor holder is designed to support 5 or 7 monitor up to 1.5kg onto a camera cage, handle, or other mounting systems via two 14-20 screws, and can be tightened more with a hex spanner.. EASY ADJUSTMENTHold fast and adjustable to position it up to 180 as per your need, and two inner M4 screws are applied for damping based on the weight of monitors, which enables you to have a better monitoring in shooting scenarios. LOCK VIA 14 SCREWSthe monitor stand 1842 could be used on any accessories with two 14 threaded holes via two 14 counterbore screws, such as camera cage gh5 cage 2049 a6500 cage 1889 BMPCC 4K Cage 2203, top plate fs7 top plate 1975, handle wooden handle 2093, etc.. HIGH QUALITYMade of Aluminum Alloy, is very sturdy and solid. Rubber cushion on the top is utilized to prevent the monitor from scratching. PLEASE NOTEThe max load of this monitor mount is 1.5kg. SMALLRIG provides friendly 24-hour Customer Support, 30-day No-hassle Return Service, Worry-free 2-year Warranty.

Multiple Threaded Holes It features locating pins for ARRI on the bottom and 14-20 screw on the top for monitor, light or microphone.

ENHANCE MOUNTThe DSLR monitor mount is designed to support a 5 7 monitor onto a camera cage or other mounting system via two 14-20 screws and a 14 thumb screw. Please reinforce the thumb screw via the hex spanner to ensure safety before using. ANTI-SCRATCHINGThe monitor holder comes with rubber pads preventing the monitor from scratching. EASY ADJUSTMENTThe monitor mount enables to swivel 360 sideways and tilt 150 without using tools. EASY FOR STORAGEWeighs only 68g, its convenient to carry around and easy for storage. HIGH QUALITYMade of aluminum alloy, sturdy and durable. The maximum payload of this mount is 1.2kg.

FOR 5 OR 7 ONBOARD MONITORSMALLRIG Swivel and Tilt Adjustable Monitor Mount with Screws Mount 2904 is designed to hold your monitor onto the camera cage, handle or other mounting system via two captive 14-20 screws. The Monitor Mount 2904 attaches to your camera cage or rig via two captive 14-20 screws.. SWIVELS 360 TILTS 170 The camera monitor holder enables to swivel 360 sideways and tilt 170 with free-stop in any positions. The tightness of each axis is adjustable via the Allen wrench. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time. Besides, the bottom comes with two 14-20 threaded holes for more DIY options..

FOR MONITOR SMALLRIG Monitor Mount 2174 is designed to hold your monitor onto any cage or handle via 38threaded hole for ARRI standard. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios.. NOTEThe monitor mount is compatible with 5 inch or 7 inch monitor and supports monitor up to 1.5kg. Also, if a cage haven't locating holes for ARRI standard, you can mount optional Mini Plate 2171 via two 14 threaded holes first, then it allows to attach the monitor mount 2174.. ROTATION ADJUSTMENT Rotation axis enables this monitor holder to adjust the position of monitor up to 146 with only one hand for better monitoring as per your needs at different directions during shooting.. COMPATIBLITY The SMALLRIG monitor mount is compatible to SMALLRIG A7III Cage 2087, BMPCC 4K Cage 2203, Z6 Z7 Cage 2243, D850 Cage 2129, NATO Handle1955 and any cage or handle with 38 locating holes.. TOOLLESS INSTALLATION The monitor mount connect cage can be tighten by hands via the thumbscrew, which provide a quick release for users. Also, it comes with a hole for using the Allen wrench to re-tighten it..

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with NATO Clamp Mount 2906 is designed to hold your monitor onto the camera cage or other mounting system via NATO clamp. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2906 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..