Top 10 Best Smallrig 1195b

Wide CompatibilitySmallRig 7cm NATO Rail is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components.. Anti-Off DesignThe safety pins on both sides prevent your NATO accessories from accidentally sliding off.. Easy to Use via Two 14 Screw It can be attached to any accessories with two 14-20 holes via two 14-20 screws included to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc.. Related ProductsIt works with items with NATO clamp, such as SmallRig 2906B, nato clamp 1973, etc.. Product InformationPackage Include 1 x NATO rail, 1 x hex spanner, 2 x 14'' screw. Materials Aluminum Alloy..

SmallRig Cold Shoe 2pcs Pack 2060 could be mounted on any camera accessories with 14 and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for sony a6500 a6300 a6500, cage for panasonic gh5 gh4 gh3, etc.. The counter bore hole in the center is attachable to a 14 screw, but the 14 screw will not touch the hot shoe contact of accessories mounted on the cold shoe.. There comes with two secure bending bevels on the one end to prevent accidental removal. The arrowheads on the cold shoe show the direction to mount additional accessories.. NOTE This Cold Shoe Mount is NOT suitable for DJI gimbal and NOT for ZHIYUN as well. For using on a cage, except for SmallRig Full Cage1661, you only need to lock it on the cage via the included 14-20 screw, the M2.5 threaded is unnecessary..

FOR DJI DJI RS 2 RSC 2 RS 3 RS 3 ProSmallRig Sling Grip 3028 is specially designed for DJI RS 2 RSC 2 RS 3 RS 3 Pro gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your DJI RS 2 RSC 2 RS 3 RS 3 Pro handheld gimbal easier with this Sling Grip.. 180 DEGREE ADJUSTMENTOffering 180 adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip.. QUICK RELEASE CLAMPThe grip mounts onto the gimbal using a NATO clamp and can support up to 13.2 lb. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support.. ANTI-SLIP DESIGNThe silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden.. MULTIPLE MOUNTING POINTSMultiple 14-20 and ARRI 38-16 threads are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905..

SmallRig Multi-function Double Ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 14 screw on the top, with fits DIY options according to your needs, such as vlogyoutubetiktok. Wide ApplicationIt can mount monitorsmall action cameraLED Lightsmicrophonesflash or any gears with a bottom 14 thread on its one end via 14 screw, and then you can lock it on rodtubetabledesktripod via the clamp tightened by the locking knob. 360 Rotation BallheadEasily loosens and tightens for a 360-degree pivot action, helping you to find the perfect angle anywhere. The best load 1.5kg. Study and Stable with High-Quality MaterialSmallRig is always aiming at providing study accessories for those who love videos, this ballhead mount clamp is made of aluminum alloy and stainless steel, very well made and durable to use. SpecificationsThe best load 1.5kg. What You Get1 x SmallRig ballhead mount clamp worry-free SmallRig customer service.

V-LOCK BATTERY PLATESmallRig V Mount Battery Plate with Dual 15mm Rod Clamp 3016 utilizing a standard V mount fits most V mount batteries to provide greater battery life for your camera rig with your battery's power ports.. COMES WITH DUAL ROD CLAMPIt comes with a dual 15mm rod clamp. This 15mm rod clamp attaches to the plate and allows you to mount the battery plate onto standard 15mm LWS rods.. MULTIPLE MOUNTING POINTSThe plate itself features multiple 14-20 countersinks, M3 countersinks, M4 countersinks, 14-20 thread holes, M4 thread holes, and an locating hole for ARRI to attach a dual rod clamp, a magic arm, or other accessories.. COMPATIBILITYThe mount features a V-lock mount with a quick release lever that fits most V-mount batteries but it is not compatible with PAGlink series V mount batteries and it is not compatible with Patona Premium Battery for BP-190WS. The mount has no electronics and is meant to mount a battery that has its own power outputs to power your gear.. HIGH CUSTOMIZATIONTwo stoppers will prevent the battery from twisting when attached. The plate is also compatible with the Blackmagic URSA mini. Note 1. No V-Lock part male provided with the plate. 2. This is purely a mounting solution for a V-mount battery no power ports on the plate..

For 5 and 7 Monitor SmallRig adjustable monitor mount is designed to support 5 and 7 camera monitors via screw mount for ARRI on the top of camera cage or other mounting system. Dual Anti-Twist Design The camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V V, and silicone pad to prevent the monitor from scratching and twisting. Quickly Tightened The mount can tilt 180 degree and and swivel 360 degree, different with the old mode 2903 using Allen Wrench, this upgrade monitor 2903B is quickly tightened via a knob to suit different angle. Multiple Threaded Holes Features locating screw for ARRI at the bottom to connect camera cage and 14-20 threaded holes for magic arm or stabilizer. 14-20 screw on the top support monitor, microphone, light, etc. High Quality Made of CNC-Machined aluminum alloy and stainless steel, sturdy enough to support and protect 5 and 7 filed monitor, different tilt angle has different load capcaity, 90 degree4.2kg, 45 degree2.5kg, 30 degree2.3kg.

SIDE HANDLE FOR CAMERA CAGESmallRig Mini Side Handle 2916 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 14-20 screws are fixed to the side of your camera cage. SmallRig 2916 Any cage featuring two 14-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2999, 2493, 2087 etc.. FOR RIGHT-HANDLEFT-HAND USEHighly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning.. ERGONOMIC DESIGNMade of aluminum alloy and plasticPCABS with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience.. MOUNTING OPTIONSSmallRig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off.. LIGHTWEIGHT PORTABLEIt weighs only 139g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. Note The maximum bearing capacity of the handle is 3.5kg. Please do not overload. .

Carbon Fiber Box Top FlagSmallRig mini matte box 3575 is designed for DSLRs and mirrorless cameras to prevent sunlight or other straight light from causing glare and flare. The adjustable carbon-fiber top flag blocks sunlight or strong light and also prevents internal reflections with its anti-reflective design. Furthermore, it avoids vignetting in 15 mm focal length shooting. Wide CompatibilityMatte box 3575 fits different dimension lenses up to 95mm via different adapter rings optional model 3383 52-95mm 55-95mm 58-95mm 62-95mm 86-95mm, standard rings 67-95mm 72-95mm 77-95mm 82-95mm or attached directly to 95mm lens. Moreover, its adapter ring fits round CPL, ND filters and other round filters of up to 92.5mm. Besides, it leaves enough space for quick disassembly and adjustment of the round filter. Multiple Installation This matte box enables to install round filters and multiple 4 x 5.65 4 x 4 plug-in filters of up to 4 mm in thickness at the same time. The included filter tray provides all-around protection of the filter with multipoint silicone. It is easy to store and prevents scratches and fingerprints while replacing plug-in filters. If you need extra filter tray, please buy SmallRig 3319 and 3320. For Side Top Flag, please go for SmallRig 3597. Portable CompactThe mini matte box 3575 is made from durable but super lightweight carbon fiber material. Portable and compact, with only 108g without adapter rings. It meets users' common shooting needs and easy for carrying outside.. What You Get1 x mini matte box lite, 1 x 67727782-95 mm adapter ring, 1 x Filter Tray 4 x 5.65, 1 x store pouch.

Male FemaleThe mini quick release plate kit comprises a quick release top plate and a base. Allows you to release and lock cameras, smartphones, monitors and lights in a second instead of screwing, greatly save your time. We supply the top plate and base individually, please search SmallRig 37303731. Super Safe and SecureThis quick release adapter is an exclusive patent designed by SmallRig. It features dual locking structure inside the baseplate, provides high load capacity of 5 kg. The QR plate can buckle vertically and stably into the baseplate, causing not deflection. Wide CompatibilityThe quick release plate supports devices with 14-20 threads, such as cameras, monitors, cages, mounting plates, etc. its 14-20 threaded holes on the bottom allow attaching devices with 14-20 screws NOT over 6mm, like tabletop tripods, ball heads, etc.. Durable and ReliableThe quick release plate made by Aluminum alloy, only 37g, mini size and super lightweight, sturdy and durable for a long use. Maximum dynamic load capacity of 5 kg, supports most devices in the market. With built-in rubber pads, protect against deflection and scratches. SmallRig Warranty ServiceOur customer representative will get back to you within 24 hours to troubleshoot the reported issue, 30-day No-hassle Return Service, Worry-free 2-year Warranty. Patented Hawklock QR EcosystemTo improve your usage experience, we've released a convenient Hawklock ecosystem of well-designed and high-quality quick release accessories, such as QR Plate kit 3513, Cold Shoe Monitor Mount 3514, Magic Arm 3515, NATO Monitor Mount 3601, QR Top Plate 3730, QR Baseplate 3731, Ball Head 3600.

FOR DJI RS 2 RSC 2 RS 3 RS 3 ProSmallRig Monitor Mount 3026 is specially designed for DJI RS 2 RSC 2 RS 3 RS 3 Pro gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc.. FIRM LOCKINGThe monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling.. 165 TILT RANGESmallRig 3026 is adjustable for 165 and can be stopped at any angle without tools. With its compact structure and consistent design fits for DJI RS 2 RSC 2 RS 3 RS 3 Pro, it is a perfect match with the stabilizer.. MULTIPLE MOUNTING OPTIONSThere are two 14-20 threaded holes on top of the monitor mount, and one 14 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount which can be attached with a sound receiver, microphone, light, etc.. HIGH CUSTOMIZATIONMatte surface perfectly matches with the industrial design of stabilizer. Please note the max payload is 1.5kg. .