Top 10 Best Smallrig 2030d

Rosette adapters for ARRI standard on both sides, this 15mm compatible dual rod clamp can be mounted on standard 15mm rods and tighten down with two M5 knob screws. Allows you to attach and adjust rosette-mount handgrips on your shoulder rig. With the tilt angle at 15 degree, it can help you get a more comfortable shoulder handheld shooting experience by attaching rosette extension arm and handgrip with M6 thread. Add five 14-20 screw hold on the top, allows you to attach more accessories. Made of high-graded aluminum alloy and stainless steel, solid and durable.

HIGH-QUALITY Made of high-quality stainless steel, and silver plated surface, more stable and durable than other screws. Comes with SmallRig logo on it. . PRECISION MACHINING standard 38-16 threaded screw chew, fits for any accessories with 38-16 threaded holes.. VARIOUS USAGE with double standard 38-16 thread screw on both sides, it could be used with two accessories for connection, such as camera cage, microrod, microphone, light stand, etc.. The maximum length is 20mm, and the maximum width is 16mm, suitable for all kinds of gears with 38 screw hole.. Package 2 x 38-16 screw. Please Check the information before purchase.

This 1.5 rod can serve as 15 mm quick release mount for adapting anything that requires a male or female 14 20 connection. It is often used in conjunction with a clamp Mount not included or CheesePlate not included.. 14-20 male mount with locking wheel can tightly secure items such as external monitors, microphones, lighting and many other accessories. A 15 mm micro rod with 1.5 total length 38 mm --- comes with 14-20 male thread on top ,14-20 female thread at bottom.. Stainless Steel Screw..

FOR DJI RS 2RSCSmallRig Sling Grip 3028 is specially designed for DJI RS 2RSC 2 gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your RS 2 or RSC 2 handheld gimbal easier with this Sling Grip.. 180 DEGREE ADJUSTMENTOffering 180 adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip.. QUICK RELEASE CLAMPThe grip mounts onto the gimbal using a NATO clamp and can support up to 13.2 lb. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support.. ANTI-SLIP DESIGNThe silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden.. MULTIPLE MOUNTING POINTSMultiple 14-20 and ARRI 38-16 threads are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905..

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2905 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..

SIDE HANDLE FOR CAMERA CAGESmallRig Mini Side Handle 2916 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 14-20 screws are fixed to the side of your camera cage. SmallRig 2916 Any cage featuring two 14-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2999, 2493, 2087 etc.. FOR RIGHT-HANDLEFT-HAND USEHighly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning.. ERGONOMIC DESIGNMade of aluminum alloy and plasticPCABS with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience.. MOUNTING OPTIONSSmallRig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off.. LIGHTWEIGHT PORTABLEIt weighs only 139g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. Note The maximum bearing capacity of the handle is 3.5kg. Please do not overload. .

SmallRig camera plate 1598 is equipped with various threaded holes 14-20 thread 38-16 thread, with standard spacing 9mm center to center, allows to set up multiple configuration for your support system. Universal Camera Plate - it fits perfectly with SmallRig rail blocks, dovetails and short rods. Multipurpose - work as a switching plate when attach the plate to the bottom of a DSLR cage, provide lots of options for mounting accessories. Longer Version - length of 90mm, width of 50mm. High Quality made of aluminum alloy, sturdy and durable.

14 Mounting PointsFeatures 14-20 screw on the top for monitor, light, or microphone. The bottom comes with a 14-20 threaded hole for more DIY options. 360 Sideways and Tilt 170The holder enables to swivel 360 sideways and tilts 170 with a free stop in any position. Maximum Load 1.5kgThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg. With Allen WrenchThe swivel and tilt mount has protective rubber padding on top and includes an Allen wrench for tightening the mounts for further security. The tightness of each axis is adjustable via the Allen wrench. NotePlease do use the Allen Wrench to re-tighten the thumbscrew for further security.

FOR BMPCC 4K CAGEA baseplate specially designed for SMALLRIG BMPCC 4K 6K cage 22032254. Secured in place with one wingnut and a security knob notch preventing the baseplate from accidentally sliding off. FOR MANFROTTO STYLEFeatures a quick release plate for Manfrotto 501PL standard and a receiver on the top, allow you to quickly assemble and disassemble. Besides, the quick release plate could be removed to mount onto the tripod that works with Manfrotto 501PL. 15mm ROD CLAMPFeatures 15mm dual rod clamp and provides a 15mm rail support at 85mm rod height. You can attach the matte box, follow focus, SMALLRIG lens support 2152, and SMALLRIG 15mm Rod 1053 to finish a shoulder support system, etc.. DOVETAIL FOR ARRI STYLEComes with an integrated dovetail for ARRI standard on the bottom that could be mounted with SMALLRIG Dovetail Plate 1463. MOUNTING POINTSThis baseplate features 14 and 38 thread holes on the bottom, which help adapt the plate for use as other plates compatible with Manfrotto, Sachtler standard, etc..

FOR DJI RS 2RSC 2SmallRig Monitor Mount 3026 is specially designed for DJI RS 2RSC 2 gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc.. FIRM LOCKINGThe monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling.. 165 TILT RANGESmallRig 3026 is adjustable for 165 and can be stopped at any angle without tools. With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer.. MULTIPLE MOUNTING OPTIONSThere are two 14-20 threaded holes on top of the monitor mount, and one 14 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount which can be attached with a sound receiver, microphone, light, etc.. HIGH CUSTOMIZATIONMatte surface perfectly matches with the industrial design of stabilizer. Please note the max payload is 1.5kg. .