Top 10 Best Smallrig 3601

Quick Release Monitor Mount SmallRig quick release monitor mount comprises a quick release plate and a NATO clamp. The quick release plate allows for quick and easy vertical release and setup monitors. NATO clamp on the bottom can be used with standard NATO rails, such as SmallRig 14092172, which can realize quick disassembly and assembly, and makes your shooting more efficient and time-saving. 360 Swivel 150 Tilt The camera monitor holder enables to swivel 360 sideways and tilt 150 with free-stop in any positions and angles you preferred. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios. Besides, its damping of pivot is adjustable through spanner. Tightness Adjustable The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew and each axis for further secure.. For 5 or 7 Monitor SmallRig monitor mount 3601B is designed to hold your monitor onto the top of the camera or other mounting system via NATO clamp. It features 14-20 screw on the top for monitor, light, or microphone, and the quick release plate is reserved for 2 optional dowel pins, which can be removed and installed as needed to effectively prevent the devices from deflection. Durable Reliable This quick release monitor holder made of Aluminum alloy, sturdy and durable for a long use. It features a maximum dynamic load capacity of 1.5 kg, supports most monitors and smartphones in the market. And its built-in rubber pads to prevent scratches and increase friction.

Wide Compatibility The quick release plate features a 14-20 screw supports devices such as camera, monitor, cage, light, etc. And the quick release plate is reserved for 2 optional dowel pins, which can be removed and installed as needed to effectively prevent the devices from deflection. It also has a 14-20 threaded hole on the bottom to allow attaching devices with 14-20 screw NOT over 6mm, like super clamp, tabletop tripod, ballhead, etc. Top Plate Base Plate The mini quick release plate kit comprises a quick release top plate and a baseplate. Quickly locked and unlocked through a click without jamming. Allows you to release and lock cameras, smartphones, monitors, and lights in a second instead of screwing, greatly save your time. Safer Faster SmallRig quick release plate features dual locking structure inside the baseplate, provides high load capacity of 5 kg. The quick release top plate can buckle vertically and stably into the baseplate, causing not deflection. Vertical installation is faster and solid than traditional slide-in installation. Durable Reliable The quick release camera mount made of Aluminum alloy, only 37g, mini size and super lightweight, sturdy and durable for a long use. Maximum dynamic load capacity of 5 kg, supports most devices in the market. With built-in rubber pads, protect against deflection and scratches. Patented HawkLock QR Ecosystem To improve your usage experience, we've released a convenient HawkLock ecosystem of well-designed and high-quality quick release accessories, such as QR Plate kit 3513, Cold Shoe Monitor Mount 3514, Magic Arm 3515, NATO Monitor Mount 3601, QR Top Plate 3730, QR Baseplate 3731, Ball Head 3600.

For 5 and 7 Monitor SmallRig adjustable monitor mount is designed to support 5 and 7 camera monitors via screw mount for ARRI on the top of camera cage or other mounting system. Dual Anti-Twist Design The camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V V, and silicone pad to prevent the monitor from scratching and twisting. Quickly Tightened The mount can tilt 180 degree and and swivel 360 degree, different with the old mode 2903 using Allen Wrench, this upgrade monitor 2903B is quickly tightened via a knob to suit different angle. Multiple Threaded Holes Features locating screw for ARRI at the bottom to connect camera cage and 14-20 threaded holes for magic arm or stabilizer. 14-20 screw on the top support monitor, microphone, light, etc. High Quality Made of CNC-Machined aluminum alloy and stainless steel, sturdy enough to support and protect 5 and 7 filed monitor, different tilt angle has different load capcaity, 90 degree4.2kg, 45 degree2.5kg, 30 degree2.3kg.

More Durable Tilt Axis The swivel and tilt monitor mount supports 180 tilt and 360 swivel adjustment, you can quickly adjust the tightness of the tilt axis through the knob. The attenuation rate after 10,000 times of tilt adjustment is less than 20.. Hand-Tighten Knob The monitor holder adds a hand-tighten knob, so that the tightness can be quickly adjusted by your hand, and it also has a wrench reinforcement hole for easy disassembly and assembly with the included Allen wrench.. Stronger Load-Bearing Capacity Maximum load-bearing 90 4.2kg, 45 tilt 2.5kg, 30 tilt 2.3kg. Excellent weight capacity makes it suitable for almost all 5 7 monitors.. Double Anti-Deflection Design The top of Field Monitor Mount 2906B has a built-in spring-loaded positioning post and a silicone gasket, which is designed for Ninja V V monitors to prevent deflection.. Quick-Release NATO Clamp The NATO clamp mount can be used with standard NATO rails, such as SmallRig 14092172, which can realize quick disassembly and assembly, and makes your shooting more efficient and time-saving..

FOR DJI GimbalSmallRig QR Plate for Arca-Swiss 3061 is designed for DJI RS 2RSC 2RS 3RS 3 Pro for Ronin-S gimbal. This plate is used to assist users to directly install an A L bracket for Arca and cage on the gimbal, which can switch quickly between tripods and gimbal, thereby saving users time.. FAST LOCKING WITHOUT TOOLSThe quick-release plate for Manfrotto with a built-in base for Arca-Swiss, can be locked quickly by thumbscrew without any tools.. ANTI-DROP DESIGNIt has an adjustable anti-drop design, which can still achieve the anti-drop function when matched with the original plate for Arca. It can also be pressed to adapt to the L bracket for Arca-Swiss and cage on the market.. WIDE COMPATIBILITYThe quick-release plate adopts the original camera plate design, and is compatible with Arca-Swiss plate, focus rod mount equipped with RS 2RSC 2Ronin-S RS 3 RS 3 Pro, and has a gear rack at the bottom, allowing the quick-release plate for a slight adjustment.. MATTE SURFACEThe matte surface process to avoid reflections, perfectly matching the gimbal body. Besides, it weighs only 90g and easy to storage..

Snap-On Quick Lock Design The side handle features snap-on quick lock design. It can align the NATO clamp to the NATO rail, and can snap on or release within one second without removing other accessories before, to save shooting time. And It can be locked again by pressing the wrench to ensure stability and safety.. Balance Adjustment The handle can be adjusted up and down within 35mm, to balance the center of gravity and avoid interference with cable mounts.. Ergonomic Design The handle is made of non-slip silicone material and features ergonomic designed. It can be quickly switched from left-handed to right-handed by the built-in wrench.. Multiple Mounting Points The handle features 14-20 threaded hole 14-20 locating hole cold shoe mount fits Monitor Mount 2905B, 2903B Magic Arm with Dual Ball Heads 3875 LED Video Light 3286B Microphone 3468 wrist strap holes compatible with Hand Strap PAC2456 built-in magnetic wrench is convenient for accessories disassembly and assembly.. Stability SmallRig Snap-on NATO Side Handle 4017 is designed to help camera moivement, and can stabilize left-handed and right-handed shooting. It can be compatible with standard NATO rail..

Original DesignSmallRig Cage Kit 3788 is specially designed for Atomos Ninja VNinja V, and this Camera Accessory Kit is designed to provide full protection for monitor and screen.. Connect More AccessoriesCage 2209 has a NATO rail for Magic Arm 2071, Monitor Mount 2385 14-20 threaded holes support Monitor Mount 2905, Magic Arm 2070 38 -16 locating holes for ARRI type allow attaching Monitor Mount 2903, Magic Arm 2115. The Cage Kit for Atomos from SmallRig provides an ideal production tool for Atomos Ninja VNinja V.. All-Round ProtectionSmallrig 3788 also provides professional cable clamp for HDMI to protect interface and prevents disconnection. The kit includes Cage 2209, Sunhood 2269, which can block strong sunlight, Silicone Case Kit 3448, embedded with environmentally friendly brass to help dissipate heat and featuring screen protector, which is easily applied and protects the monitor screen from fingerprints, water spray, dust, scratches, and knocks.. Packgge Include 1 x Cage1 x Cable Clamp2 x 14-20 Screw4 x M3 Screw3 x Allen Wrench1 x Sunhood1 x Silicon Case2 x Anti-twist Locating Plate1 x Screen Protector1 x Wipe1 x Tissue1 x Dust cloth1 x Dust Absorber. SmallRig Warranty ServiceOur customer representative will get back to you within 24 hours to troubleshoot the reported issue, 30-day No-hassle Return Service, Worry-free 2-year Warranty.

Lighter and More Compact - Weighing Only 3.8 oz, SmallRig mini matte box 3575 fits small mirrorless or DSLR cameras, such as for Sony A7S III, for Canon R5R6. The included carbon fiber top flag helps block veiling glare or bright reflections from striking your lens, and it can be folded down to cover the front of the matte box and provide protection to the front of your lens.. Wide Application - The matte box features a 95mm diameter opening, and the included 67, 72, 77, and 82mm threaded adapter rings allow you to use the matte box with lenses of different sizes and diameters. Furthermore, it avoids vignetting in 15 mm focal length shooting thanks to its new design.. Accepts Circular Filter - Its thread adapter ring fits round CPL, ND filters and other round filters of up to 92.5mm. Besides, it leaves enough space for quick disassembly and adjustment of the round filter.. Accepts 4 x 5.65 Filter - This matte box enables to directly install one 4 x 5.65 plug-in filters of up to 4 mm in thickness, and two or more filters with additional filter trayno include. The included filter tray provides all-around protection with multipoint silicone, and prevents scratches and fingerprints while replacing.. Optional Accessories - Filter Tray 4 x 5.65 3319 Filter Tray 4 x 4 3320 4x5.65 ND0.6 Filter 3588 4x5.65 ND1.2 Filter 3589. What You Get -1 x mini matte box lite, 1 x 67727782-95 mm adapter rings, 1 x built-in Filter Tray 4 x 5.65, 1 x store pouch.

UNIVERSAL BASEPLATEA dedicated baseplate designed for mirrorless and DSLR cameras. HEIGHT-ADJUSTABLEThe baseplate is height-adjustable via the side wingnut to ensure different cameras sit on the baseplate complying with the LWS standard, allow you to attach Follow Focus, Matte Box, etc. FOR ARCA STANDARDFeatures a baseplate and a quick release plate for Arca standard on the top. Attach the QR plate to the camera or camera cage, and then drop it into the receiver, locked via the side knob screw. 15mm ROD CLAMPComes with a 15mm rail support system for accessories attachment. You can attach SMALLRIG 15mm Rod 1053 for a Lens Support 2152 or Shoulder Pad 2077. MOUNTING POINTSThere are multiple 14 and 38 threaded holes on the bottom of the baseplate for attaching different tripod plate.

CHANGE ORIENTATION IN SECONDSThe SmallRig New Design Nato Handle 3260 is born to achieve changing the orientation in seconds. For different filming angles, you can press the unlock button on the side for easy 360-degree rotation and release it for automatic locking.. WIDE APPLICTIONThe quick nato handle comes with a nato rail, and it could be quickly mounted onto the side of the cage via a NATO clamp.. COMFORTABLE TO USEErgonomically designed with a comfortable silicone surface texture, the handle is anti-slip and sweat-proof.. MOUNTING POINTSThe handle comes with 14-20 38-16 threaded holes and a cold shoe for easy attachment of accessories. With built-in hand strap holes, it works with Hand Strap PAC2456 not included and provides more options to further enhance the user's grip comfort.. NOTE1 The product is ONLY for the left hand. 2 It is a normal mechanical movement if the handle gets stuck and makes clicking sounds. 3 The maximum bearing capacity of 5kg..