Top 10 Best Smallrig 856

Install WaySmallRig BUN2501 attaches to ARRI-standard accessory mounts using a 38-16 screw and two locating pins. Built-in NATO Rail Features a NATO rail on the top, compatible with NATO accessories like SmallRig NATO Ball Head Arm 2071, SmallRig NATO Clamp 1973 or 2207, making it easy and quick to release devices. Prevent Sliding OffThe spring-loaded safety pins on both ends prevent your devices from accidentally sliding off. CompatibilityFit for ARRI Accessory Mounts. Low-profile design, 35mm long. NOTEThis NATO rail is the short one, and NOT compatible with SmallRig NATO Handles or Monitor Holders. If you want to mount those accessories, please take a look at SmallRig BUM2521.

SIDE HANDLE FOR CAMERA CAGESmallRig Mini Side Handle 2916 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 14-20 screws are fixed to the side of your camera cage. SmallRig 2916 Any cage featuring two 14-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2999, 2493, 2087 etc.. FOR RIGHT-HANDLEFT-HAND USEHighly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning.. ERGONOMIC DESIGNMade of aluminum alloy and plasticPCABS with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience.. MOUNTING OPTIONSSmallRig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off.. LIGHTWEIGHT PORTABLEIt weighs only 139g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. Note The maximum bearing capacity of the handle is 3.5kg. Please do not overload. .

SmallRig Cold Shoe 2pcs Pack 2060 could be mounted on any camera accessories with 14 and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for sony a6500 a6300 a6500, cage for panasonic gh5 gh4 gh3, etc.. The counter bore hole in the center is attachable to a 14 screw, but the 14 screw will not touch the hot shoe contact of accessories mounted on the cold shoe.. There comes with two secure bending bevels on the one end to prevent accidental removal. The arrowheads on the cold shoe show the direction to mount additional accessories.. NOTE This Cold Shoe Mount is NOT suitable for DJI gimbal and NOT for ZHIYUN as well. For using on a cage, except for SmallRig Full Cage1661, you only need to lock it on the cage via the included 14-20 screw, the M2.5 threaded is unnecessary..

Male FemaleThe mini quick release plate kit comprises a quick release top plate and a base. Allows you to release and lock cameras, smartphones, monitors and lights in a second instead of screwing, greatly save your time. We supply the top plate and base individually, please search SmallRig 37303731. Super Safe and SecureThis quick release adapter is an exclusive patent designed by SmallRig. It features dual locking structure inside the baseplate, provides high load capacity of 5 kg. The QR plate can buckle vertically and stably into the baseplate, causing not deflection. Wide CompatibilityThe quick release plate supports devices with 14-20 threads, such as cameras, monitors, cages, mounting plates, etc. its 14-20 threaded holes on the bottom allow attaching devices with 14-20 screws NOT over 6mm, like tabletop tripods, ball heads, etc.. Durable and ReliableThe quick release plate made by Aluminum alloy, only 37g, mini size and super lightweight, sturdy and durable for a long use. Maximum dynamic load capacity of 5 kg, supports most devices in the market. With built-in rubber pads, protect against deflection and scratches. SmallRig Warranty ServiceOur customer representative will get back to you within 24 hours to troubleshoot the reported issue, 30-day No-hassle Return Service, Worry-free 2-year Warranty. Patented Hawklock QR EcosystemTo improve your usage experience, we've released a convenient Hawklock ecosystem of well-designed and high-quality quick release accessories, such as QR Plate kit 3513, Cold Shoe Monitor Mount 3514, Magic Arm 3515, NATO Monitor Mount 3601, QR Top Plate 3730, QR Baseplate 3731, Ball Head 3600.

UNIVERSAL SIDE HANDLEONLY Compatible with SmallRig cage 3561for iphone 13 Pro Max, 3562for iphone 13 Pro, 3611for iphone Series, 3176for iphone 12 Pro Max, 3175for iphone 12 Pro, and universal cage 3155, CPU2391B, 2791, and CPU2494 for a great handheld shooting experience. UP AND DOWN ADJUSTABLE A built-in hex on the bottom can be used to adjust the handle up and down based on your needs. MOUNTING OPTIONSThe aluminum portion of the handle features 14-20 threads to add a light, microphone, monitor, mounting arm, or other accessories. And a lanyard hole for attaching the wrist strap, thus you can keep your rigs safe and handy. UNIQUE DESIGNIt weighs 120g only and features an aluminum body with anti-slip silicone coverings to provide a comfortable and lightweight handheld shooting. ADJUSTABLE AND SWITCHABLEThe screws attach to a sliding mechanism that allows you to slide the handle up and down for your preferred position. It can also be mounted on either the right side or left side of the cage thanks to the detachable joint.

About SmallRig 2797 SmallRig 2797 is designed for accepting shoe mount devices such as flashes, lights, microphones, etc. NOTE This cold shoe mount only Compatible with products with cold shoe base and hot shoe without electronic contacts. 14-20 ScrewThe cold shoe mount secures to rigs, brackets, and cages via a 14-20 screw, and mounts to ball heads, magic arms, and monitor mounts via the integrated 14-20 female thread. Safety Release Button Featuring safety release in one end prevents the accessory from detaching accidentally to ensure your devices safe. Compatibility Fits Any cages, ball heads, or any rigs features standard 14-20 female thread and 14-20 screw. Package Includes1 x Cold Shoe Mount 1 x Allen Wrench.

FOR DJI RS 2RSCSmallRig Sling Grip 3028 is specially designed for DJI RS 2RSC 2 gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your RS 2 or RSC 2 handheld gimbal easier with this Sling Grip.. 180 DEGREE ADJUSTMENTOffering 180 adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip.. QUICK RELEASE CLAMPThe grip mounts onto the gimbal using a NATO clamp and can support up to 13.2 lb. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support.. ANTI-SLIP DESIGNThe silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden.. MULTIPLE MOUNTING POINTSMultiple 14-20 and ARRI 38-16 threads are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905..

UNIVERSAL USAGEThis SmallRig Baseplate 1674 is a simple and light base plate for the most popular cameras, such as for Sony a6500 a6600 a6300 a6400 a6000, Sony A7 series, for Panasonic GH5 GH6, for Canon R5 R6 R7 R10, for BMPCC 4K 6K Pro etc. It attaches to a camera with a 38 or 14 screw.. 15mm LWS ROD SYSTEMThe base plate features 15mm diameter and 60mm spaced rod clamps that allows you to mount two 15mm rods, then lens support or other accessories.. RUBBER CUSHIONSThere are rubber cushions on the base plate, which increases friction for camera to prevent the twisting. Also, the rubber cushions can protect the camera be scratched.. MOUNTING POINTS It provides 14'' and 38'' holes on the bottom for quick mounting a cage onto a tripod or any other plates.. MATERIAL Made of solid aluminium alloy, is very solid and sturdy.

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2905 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..

MAGIC ARMThe precise and durable designed Articulating Magic Friction Arm provides great versatility for the positioning of access.. EASY POSITIONDouble 360 degree Ball Head Articulating design adjusts any angles based on your needs.. WIDE COMPATIBILITYWith 14 thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc.. RUBBER THREADMounted with 14 screw is a O ring rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter.. CUSTOMER SERVICEBacked with 100 satisfaction guaranteed for quality problem 24 h x 7 Customer Service Support..