Top 10 Best Smallrig Battery

Sufficient V-mount Battery SmallRig V mount battery 3580 with high capacity of 6700mAh99Wh14.8V, built-in premium li-battery to brings powerful battery life for lengthy videomaking and photography projects, good power backup solution. Various Interfaces This V-mount battery comes with USB-C, USB-A, 8V DC, 12V DC, BP and D-TAP Ports, which are more versatile and support simultaneous power multiple devices, like DSLR camera, camcorder, monitor, smartphone, wireless video transmitter, tablet and laptop, etc. It also have a 14-20 38-16 threaded hole on the V-lock, you can hold it with a ballhead or other clamp. Bi-direction PD Fast-Charging The built-in BMS intelligent Chip of SmallRig V-lock battery VB99 supports muti-protocol fast-charging such as PD QC SCP PPS APPLE-2.4A etc., it supports high power USB-C bi-directional PD fast-charging up to 65W, making your charging faster. mini Portable V Mount Battery Palm-size, just 4.21x2.87x2.08 inches, only 1.21 lbs, approximately 30 smaller than traditional V-mount batteries, feel free to carry outside and travel. And you can also keep track of the battery's working status at all times via its OLED screen. Safe Reliable The V mount battery designed with short circuit, over-temperaure, over-voltage, over-current, over-charge and over-discharge protection. Made by quality fireproof ABS and PC shell frosted to ensure fine touch and durability.

Sufficient Power SupplySmallRig NP-F970 battery 3823, replacement NP F970 battery for Sony NP-F970 battery, comes with two 7800mAhReal rechargeable batteries and a charger to brings long battery life for your videos and photos shooting, good power backup solution. Widely CompatibilitySmallRig NP-F970 battery are fully fits for Sony original camera and charger, fully decoded and no memory effect. It is suitable for Sony NP-970 NP-F960 NP-F950 NP-F930 NP-F770 NP-F750 NP-F730 NP-F550 NP-F570 batteries, for Sony HXR-NX5R HXR-NX100 HXR-MC1500C HXR-MC2500 HDR-FX1000E HDR-AX2000E NEX-EA50CH NEX-FS700 video cameras, and LED lights, monitors, motorized camera slider, etc.. Multiple Charing OptionThis NP-F970 battery charger comes with Micro-USB and USB-C interface, allowing it to be charged via USB adapter,car charger, power bank. Particularly, the USB-C interface supports 9V2A input. Intelligent LCD ScreenWhen Charger powered up, the LCD screen will display the charging status of each battery in real time, and the charging progress can be seen at a glance. Double-slot design can charge two NP-F970 batteries simultaneously, effectively saving charging time. Safe and ReliableThe NP-F970 charger designed with over-charging, over-current, over discharge, over-voltage and short-circuit protection ensures reassuring safety. Made by quality fireproof ABS and PC shell frosted to ensure fine touch and durability. Lightweight and compact, can be put in a bag and carried around.

Sufficient Power SupplySmallRig EN-EL15 battery 3820, replacement EN EL15 battery for Nikon EN-EL15 Battery, comes with two 2040mAhReal rechargeable batteries and a charger to brings long battery life for your videos and photos shooting, good power backup solution. Widely CompatibilitySmallRig EN-EL15 battery are fully fits for Nikon original camera and charger, fully decoded and no memory effect. They are suitable for Nikon D500, D600, D610, D750, D780, D800, D800E, D810, D810A, D850, D7000, D7100, D7200, D7500, 1V1, Z 5, Z 6, Z 7, P520, P530 cameras, and more. Multiple Charing OptionThis EN-EL15 battery charger has two charging methods use its built-in USB-A charging cable use its USB-C input interface. It allows being charged via USB adapter, car charger, power bank. Intelligent LCD ScreenInput 5V2.1A, double-slot design can charge two EN-EL15 batteries at the same time. When Charger powered up, you can get all the information of each battery by LCD screen, including charging current, charging voltage, charging progress and charging capacity. Safe and ReliableThe EN-EL15 charger designed with over-charging, over-current, over discharge, over-voltage and short-circuit protection ensures reassuring safety. Made by quality fireproof ABS and PC shell frosted to ensure fine touch and durability. Lightweight and compact, can be put in a bag and carried around.

FOR POWER BANK SMALLRIG Holder BUB2336 is designed for portable power banks, it could attaches a power bank to the camera rig when a sustainable charging solution is required.. SPRING LOADED CLAMP The holder features a spring loaded clamp which enables to holds power banks with width ranging from 53mm to 87mm, which covers most products in the market.. RUBBER CUSHIONS The holder BUB2336 comes with soft rubber cushions inside, which can protect your power bank from scratching.. MOUNTING POINTS On the top, bottom and back of the holder, there are multiple 14 threaded holes for connect with other accessories, such as SMALLRIG Top Handle 1638, SMALLRIG Dual Rod Clamp 942, SMALLRIG Magic Arm 2070 or SMALLRIG cages.. LIGHTWEIGHT AND DURABLE The holder BUB2336 is made of aluminum alloy, is very sturdy and durable. Moreover, the net weight is only 105g, is lightweight for you to carry around..

V-Lock Battery PlateSmallRig V Mount Battery Plate with Dual 15mm Rod Clamp 3016 utilizing a standard V mount fits most V mount batteries to provide more excellent battery life for your camera rig with your battery's power ports.. Comes with Dual Rod ClampIt comes with a dual 15mm rod clamp, which allows you to mount the battery plate onto standard 15mm LWS rods.. Multiple Mounting PointsThe plate itself features multiple 14-20 countersinks, M3 countersinks, M4 countersinks, 14-20 thread holes, M4 thread holes, and a locating hole for ARRI to attach a dual rod clamp, a magic arm, or other accessories.. Wide CompatibilityThe mount features a V-lock mount with a quick-release lever that fits most V-mount batteries, but it is not compatible with PAGlink series V mount batteries or Patona Premium Battery for BP-190WS. The mount has no electronics and is meant to mount a battery that has its own power outputs to power your gear.. High CustomizationTwo stoppers will prevent the battery from twisting when attached. The plate is also compatible with the Blackmagic URSA mini. Note 1. No V-Lock part male provided with the plate. 2. This is purely a mounting solution for a V-mount battery no power ports on the plate.. Related ProductsSmallRig mini V-mount Battery VB50 50Wh 3579 and VB99 99Wh 3580 are now available, multi-interfaces and PD fast-charging design, widely compatibility use for cameras, camcorders, monitors, smartphones, etc..

FOR POWER BANKDesigned to attach a power bank to a camera rig, or a mobile phone rig when a sustainable charging solution is required. SPRING LOADED CLAMPIt will hold power banks with width range from 53mm to 81mm, which covers most power bank products in the market.Such as fit for Anker,fit for RAVPower, fit for POWERADD, etc. RUBBER CUSHIONSInbuilt rubber pads help absorb shocks and prevent your power bank from scratching. SAFE INSTALL It comes with two 14 screws, which can be used to attach the holder to the desired place, and the screw tighten design ensures a more secure and stable clamping of the power bank. LIGHTWEIGHT AND DURABLEThe holder2790 is made of aluminum alloy and stainless steel, is very sturdy and durable. Moreover, the net weight is only 80g, is lightweight for you to carry around.

High CustomizationSmallRig V mount battery adapter plate 3204 is designed to provide longer battery life for your camera equipment through V-mount batteries. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. It is suitable for Sony for Canon and other DSLR cameras. Adjustable ArmThis V lock battery plate features an adjustable arm for quick adjustment of the V mount battery position, to get a perfect angle for your battery like vertically or hang it upside down on the rod system. Dual 15mm Rod ClampThis power supply splitter comes with a dual 15mm rod clamp, lock the plate on 15 mm LWS rod system easily and quickly. Rich Output PortsIt comes with an 8V DC, a 14.2V D-TAP and two 12V DC ports, satisfied different requests. 5V2A USB output port to power other external accessories like a monitor, a phone, etc.. Note Do not use in damp environment to avoid short circuit The plate fits most V mount batteries but PAGlink series V mount batteries and Patona Premium Battery for BP-190WS. SmallRig V Mount BatterySmallRig mini V-mount Battery VB50 50Wh and VB99 99Wh are now available, multi-interfaces and PD fast-charging design, widely compatibility use for cameras, camcorders, monitors, smartphones, etc. if you need a compact sufficient power supply, please search SmallRig V Mount Battery 3579AsinB0B6YYCFBK, SmallRig V Mount Battery 3580AsinB0B6Z9K42P..

HIGH CUSTOMIZATIONSmallRig 3018 is designed to provide greater battery life for your camera rig via an NP-F battery for most Sony. You can mount the plate to the camera rig using a 14-20 thumbscrew or two 14-20 hex screws.. TWO DC OUTPUTSThe NP-F Battery Adapter Plate provides different output ports, including a 12V DC 5.52.5mm output port and a 7.4V DC 5.52.1mm output ports, greatly extending shooting time. If you need DC5521 to LP-E6 Dummy Battery Charging Cable for LP-E6 Battery, pls search SmallRig 2919.. LOW BATTERY REMIND LEDIt features an LED indicator that will turn red when the battery level is less than 30 percent. When the indicator flashes, it means the battery level is less than 10 percent, and you need to replace the battery.. SWEET DESIGNThe plate features a rubber pad on the bottom for a more stable installation.. PRODUCT INFORMATION Package Includes 1 x NP-F Battery Adapter Plate 2 x 14-20 Mounting Screw 1 x Allen Wrench Materials ABSPC.. PLEASE NOTEThis product does NOT include charging cables and NP-F battery..

Compatibility SmallRig NP-F Battery Adapter Plate Professional Edition 3168 is designed to enable NP-F batteries on the market including original batteries for Sony and Smallrig NP-F970 battery sets 3823 or third-party batteries. It can provide a better power solution for BMPCC 4K6K and various DSLR cameras. Charge Multiple Devices When there are multiple devices that need to be powered at the same time, such as the camera body, monitor, follow focus, image transmission, etc., this NP-F battery adapter plate can charge 2-3 devices at the same time, extending shooting time. Multiple Interfaces The NP-F Battery Plate comes with DC 8V and 12V output, and its Type-C port can output current or charge NP-F battery. All portsare designed with short circuits protection to avoid damage to the camera. Safety Lock Design The Battery plate comes with a self-locking button for quick and secure battery installation, and a 14 threaded hole for easy attachment to cage. LED Indicator The plate features LED lights indicating battery connection and battery life. You can check the battery life and connection status at any time, with no worry about the power running out at the wrong time. Note After installing the battery, please press the switch for 3s to turn on the power supply function of the NP-F Battery Adapter Plate. At this time, the indicator light is on, and the DC interface has current output. When you stop using it, please press the switch for 3s to turn off the power base to save battery power.

Compatibility SmallRig 3676 is a charging module designed for SmallRig COB LED video light SmallRig Model 3470347134723473. V-Mount Charging This plate efficiently provides a stable power supply for COB lights, making the shooting process more secure and stable. It works well with your V-mount batteries. Charging Cable Included It is equipped with a D-TAP to 3-pin XLR power cable of 180cm length. Operating Guide Firstly fix the battery plate on the tripod, then mount the V-mount battery on the plate, and finally connect the COB light with the battery through the D-tap cable. What's Included V-mount battery plate x 1, Power cable 180cm length x1.