Top 10 Best Smallrig Cold Shoe Mount

Triple Cold Shoe --- Triple Cold Shoe Bracket, allow you connect Microphone, Fill light and other devices. Extension 14 Screw ---14 Screw Hole Connect Magic arm to expand more equipment. Aluminum Material --- Full aluminum alloy material not only strong, but also lightweight. Pattern Screw Design --- Screws retain three positioning and decorative patterns to increase hand feel and better locking bracket.

Aluminum Material Features 3 versatile cold shoes with durable aluminum alloy construction. Cold Shoe Design Allows simultaneous use of multiple hot shoe accessories, compatible with flashes and microphone receivers with standard hot shoes, such as Canon, Nikon, Pentax, Olympus flashes and zoom recorders. Mounting Method Attach via shoe or 14-20 mount. Built-in backstop for safe installation. Wide range of uses can be used for any multi-purpose shooting such as short films, broadcast recordings, family gatherings and public presentations.

SmallRig Cold Shoe 2pcs Pack 2060 could be mounted on any camera accessories with 14 and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for sony a6500 a6300 a6500, cage for panasonic gh5 gh4 gh3, etc.. The counter bore hole in the center is attachable to a 14 screw, but the 14 screw will not touch the hot shoe contact of accessories mounted on the cold shoe.. There comes with two secure bending bevels on the one end to prevent accidental removal. The arrowheads on the cold shoe show the direction to mount additional accessories..

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2905 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..

About SmallRig 2797 SmallRig 2797 is designed for accepting shoe mount devices such as flashes, lights, microphones, etc. 14-20 ScrewThe cold shoe mount secures to rigs, brackets, and cages via a 14-20 screw, and mounts to ball heads, magic arms, and monitor mounts via the integrated 14-20 female thread. Safety Release Button Featuring safety release in one end prevents the accessory from detaching accidentally to ensure your devices safe. Compatibility Fits Any cages, ball heads, or any rigs features standard 14-20 female thread and 14-20 screw. Package Includes1 x Cold Shoe Mount 1 x Allen Wrench.

It includes a 14 counter bore slot and a cold shoe. 14 counter bore slot could be mounted on the 14 threaded holes on the right side of Cage for Sony A6500 1889.. The arrowheads on the cold shoe point to anti-off direction.. The cold shoe is compatible with RODE microphone, wireless microphone and RODE SVMX microphone.. The cold shoe extends beyond the cage, thus it will not block the buttons and ports of the cage.. Materials Aluminum Alloy.

Easy To Use The holder enables to tilt 185 and allows to hold your monitor onto any position without using tools.You can adjust the degree of tightness via adjusting the screw on each side.. CNC-Machined Aluminum The robust mount is CNC-Machined Aluminum and it can support monitor or light up to 1.2kg.. Prevent Scratching The top of mount features rubber pad to protect the monitor or light from scratching.. Six Tightening Holes Each thumbscrew features six holes allows to use the hex spanner for tightening to ensure your monitor safe.. Features 14 Thread Hole The bottom features a 14-20 threaded hole for more accessories attachment if needed..

Anti-TwistSMALLRIG KBUC2702 can be mounted with two 14'' screws and it has a raised bevel above where the screws go. This cold shoe mount adapter can prevent twisting spaced perfectly. Two 14 GroovesThis hot shoe bracket has two 14 grooves on the bottom, which allows users to mount it on any camera rig with two 14 holes from 9mm to 18mm apart center to center. The lining is smooth and cut is clean so that metal to metal contact when putting something in the hotshoe is nice and smooth feeling. Extensive Compatibility It is compatible with on-camera lights, top handles, on-camera microphone, or any other rigs with two 14 holes from 9mm to 18mm apart center to center, such as SMALLRIG 2049. Anti-ScratchTwo cambered chamfers on one end of the slot to prevent your coldhot shoe pinch from accidental removal. With the 4.5mm vertial gap in the middle of the slot, this cold shoe doesn't scratch the bulged electric contacts of the hot shoe pinch when slide in and out. Durable and SturdyCNC machined aluminum alloy, dimensions 28x25x10.5mm.

DUAL MIC BRACKETSmallRig Two-in-one Bracket for Wireless microphone 2996 is designed for 2-person vlogging, which is compatible with RODE Wireless Go Saramonic Blink 500 and connect two audio sources at the same time.. MOUNT CONNECT TWO MIC SYSTEMSUsing the built-in clip of two microphones, the bracket sets the two receivers stably with a compact design and lightweight structure.. BUILT-IN COLD SHOE MOUNTThe cold shoe mount allows you to slide the bracket directly onto the camera and the cage to provide convenient and reliable using experience for shooting. Using a shoe mount, the Two-In-One Bracket can be attached to the shoe mount of your camera, cage, or grip handle, and the two mic systems attach separately to the left and right sides via their built-in attachment clips.. 2 X 3.5MM AUDIO INPUTS, 1 X 3.5MM OUTPUTIt allows you to attach two of these units at the same time, connect both into 3.5mm input ports, and output both to your camera at the same time via a 3.5mm output port. When you export the audio to your editing application, the two sources can still be edited separately.. PLEASE NOTE1. Please assemble the receivers in the direction indicated by the arrow for using 2.The left and right channel will be combined into one channel to output the audio sources. The audio file can be split and edited in the audio software..

Anti-twist SMALLRIG cold shoe anti-off 2260 connects via two 14-20 screws to prevent twisting. Prevent Sliding SMALLRIG cold shoe 2260 features an anti-off button to prevent sliding. Compatibility Accepts any standard shoe-mount devices such as lights, microphones, etc.. What You Get1 x Cold Shoe Mount, 2 x 14 Screw and 1 x Hex Spanner. What You Get1 x Cold Shoe Mount 2 x 14 Screw 1 x Hex Spanner.

Compatibility Firmly holds 19-25mm diameter microphones. By adjusting the knob, it can grip microphones of different sizes firmly. Cold Shoe Holder On the bottom of the holder is a cold shoe, which can be attached directly to cold shoe adapters such as SmallRig Cold Shoe Mount 1960 and 2260, or to cages integrating a cold shoe mount on the top. Built-in Soft Silicone It is equipped with soft silicone in the microphone clamp and between the two parts, which absorb bumps and noises when you shoot run-and-gun. Precision Design Compact and low-profile 70.9mm in height. The Package contains 1 x Microphone Holder.

COLD SHOE MOUNTSmallRig Cold Shoe BUC2806 is designed for converting two 14-20 threaded holes to accept shoe mount devices such as flashes, lights, microphones, etc. PREVENT TWISTINGThe aluminum-constructed Cold Shoe 2806 directly mounts to any camera accessory with two anti-drop 14-20 screws to prevent twisting so it can be used to mount your camera to rigs, brackets, and cages. SAFETY RELEASEFeaturing safety release in one end prevents the accessory from detaching accidentally to ensure your devices safe. RECOMMENDED FOR YOUYou can mount the Monitor Mount BSE2346 or Ball Head 761 to the cold shoe for monitor and attach a Cold Shoe Handle 2094 to hold your camera. LIGHTWEIGHTWeighs only 18g, the pocket size cold shoe mount is exceptionally lightweight and damage resistant.