Top 10 Best Smallrig Dcs2695

FOR DJI RS 2RSC 2SmallRig Monitor Mount 3026 is specially designed for DJI RS 2RSC 2 gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc.. FIRM LOCKINGThe monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling.. 165 TILT RANGESmallRig 3026 is adjustable for 165 and can be stopped at any angle without tools. With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer.. MULTIPLE MOUNTING OPTIONSThere are two 14-20 threaded holes on top of the monitor mount, and one 14 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount which can be attached with a sound receiver, microphone, light, etc.. HIGH CUSTOMIZATIONMatte surface perfectly matches with the industrial design of stabilizer. Please note the max payload is 1.5kg. .

14 Mounting PointsFeatures 14-20 screw on the top for monitor, light, or microphone. The bottom comes with a 14-20 threaded hole for more DIY options. 360 Sideways and Tilt 170The holder enables to swivel 360 sideways and tilts 170 with a free stop in any position. Maximum Load 1.5kgThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg. With Allen WrenchThe swivel and tilt mount has protective rubber padding on top and includes an Allen wrench for tightening the mounts for further security. The tightness of each axis is adjustable via the Allen wrench. NotePlease do use the Allen Wrench to re-tighten the thumbscrew for further security.

UNIVERSAL USAGEThis SMALLRIG Baseplate 1674 is a simple and light base plate for the most popular cameras, such as for Sony a6500 a6600 a6300 a6400 a6000, Sony A7 series, etc. It attaches to a camera with a 38 or 14 screw.. 15mm LWS ROD SYSTEMThe base plate features 15mm diameter and 60mm spaced rod clamps that allows you to mount two 15mm rods, then lens support or other accessories.. RUBBER CUSHIONSThere are rubber cushions on the base plate, which increases friction for camera to prevent the twisting. Also, the rubber cushions can protect the camera be scratched.. MOUNTING POINTS It provides 14'' and 38'' holes on the bottom for quick mounting a cage onto a tripod or any other plates.. MATERIAL Made of solid aluminium alloy, is very solid and sturdy.

This 1.5 rod can serve as 15 mm quick release mount for adapting anything that requires a male or female 14 20 connection. It is often used in conjunction with a clamp Mount not included or CheesePlate not included.. 14-20 male mount with locking wheel can tightly secure items such as external monitors, microphones, lighting and many other accessories. A 15 mm micro rod with 1.5 total length 38 mm --- comes with 14-20 male thread on top ,14-20 female thread at bottom.. Stainless Steel Screw..

SmallRig Cold Shoe 2pcs Pack 2060 could be mounted on any camera accessories with 14 and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for sony a6500 a6300 a6500, cage for panasonic gh5 gh4 gh3, etc.. The counter bore hole in the center is attachable to a 14 screw, but the 14 screw will not touch the hot shoe contact of accessories mounted on the cold shoe.. There comes with two secure bending bevels on the one end to prevent accidental removal. The arrowheads on the cold shoe show the direction to mount additional accessories..

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2905 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..

FOR POWER BANK SMALLRIG Holder BUB2336 is designed for portable power banks, it could attaches a power bank to the camera rig when a sustainable charging solution is required.. SPRING LOADED CLAMP The holder features a spring loaded clamp which enables to holds power banks with width ranging from 53mm to 87mm, which covers most products in the market.. RUBBER CUSHIONS The holder BUB2336 comes with soft rubber cushions inside, which can protect your power bank from scratching.. MOUNTING POINTS On the top, bottom and back of the holder, there are multiple 14 threaded holes for connect with other accessories, such as SMALLRIG Top Handle 1638, SMALLRIG Dual Rod Clamp 942, SMALLRIG Magic Arm 2070 or SMALLRIG cages.. LIGHTWEIGHT AND DURABLE The holder BUB2336 is made of aluminum alloy, is very sturdy and durable. Moreover, the net weight is only 105g, is lightweight for you to carry around..

SIDE HANDLE FOR CAMERA CAGESmallRig Mini Side Handle 2916 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 14-20 screws are fixed to the side of your camera cage. SmallRig 2916 Any cage featuring two 14-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2999, 2493, 2087 etc.. FOR RIGHT-HANDLEFT-HAND USEHighly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning.. ERGONOMIC DESIGNMade of aluminum alloy and plasticPCABS with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience.. MOUNTING OPTIONSSmallRig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off.. LIGHTWEIGHT PORTABLEIt weighs only 139g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. Note The maximum bearing capacity of the handle is 3.5kg. Please do not overload. .

Double head 14 male screw Since both ends are 14 male screw, it could be used on most accessories with the 14-20 thread.. Multi-functional, can be used with tripods, monopods, telescopes, ball heads, lens collars, lens plates etc.. Made of high quality stainless steel, it is light-weight and durable.. Recommended for those who frequently reconfigure equipment. It is the optimum equipment for photographersmovie makers.. Size Length 20mm, approx. Diameter 16mm.Please note that the screws are with SmallRig LOGO on them.

QR NATO HANDLESMALLRIG Nato Top Handle grip 2439 is designed to mounts quickly to a standard NATO rail to provide a balanced gripping point for your camera. ACCESSORY THREADSMultiple 14-20, 38-16 and Arri 38-16 threads are provided for accessories such as SMALLRIG Magic Arm 2070, etc. ANTI-OFF DESIGNThe handle is able to secures to any cage or top plate features a NATO rail via the thumbscrew. The twist handle is equipped with three cold shoes. One of them in front features an anti-off button to protect your setup from slipping off. BUILT-IN ROD CLAMP COLD SHOE MOUNTSThe handle htn2439 integrates with three cold shoe mounts allows mounting Cold Shoe Monitor Mount like SMALLRIG 1842 and SMALLRIG BSE2346. The handle also offers a 15mm rod clamp for rod compatible accessories. BUILT-IN SPANNERThe NATO top handle comes with a hex spanner, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and change front to back orientation according to your need. So that makes it very easy to use for balancing the camera for handheld use.