Top 10 Best Smallrig For Nikon Z9

Anti-deflection Anti-scratch The cage secures to the camera with one 14''-20 screw locating pin at the bottom and the right side shoulder strap hole. Features all-around protective rubber pads inside to prevent scratches and a built-in magnetic slotted screwdriver Allen Wrench that is easy to use.. Modular Design for Nikon Z9Z9 cage is designed to provide accessory mounts and protection for the camera.The cage adopts a split design, which fits better through screw installation. Multiple Mounting Points Multiple 14''-20 threaded holes and 38-16 locating holes for ARRI , support Top Handle 2165, Side Handle 2093HSS2624, and Monitor Mount 2903 Comes with a cold shoe on the top to attach microphones, LED lights, etc.. Integrates Swiss Plate for Arca The bottom integrates a Swiss plate for Arca that allows switching directly to tripod shooting and features multiple 14''-20 threaded holes allowing for mounting RS 2RSC 2 quick release plate Upper with two 14screws.. Support Dual Rod System The front of the cage features two 14''-20 threaded holes for 15mm Rod Clamp 942 that supports lens support, follow focus, matte box, etc.. Note 1. Please remove the shoulder strap ring on the right side before attaching the cage. 2. The cage is not compatible with WR-R11 for Nikon remote controller..

Design for Nikon Z 9Z 9 cage is specially designed for Nikon Z 9, providing accessory attachment and protection. It includes a Z 9 Cage 3195 and a Top Handle 2165 and maintains access to buttons, holes, card slots, battery door and flip screen after installation. Stable Anti-DeflectionThe Z 9 cage is locked via a 14''-20 screw at the bottom, locating pin and a shoulder strap ring on the right side for effectively preventing deflection, it comes with protective cushions inside to prevent scratches the top handle is ergonomically designed to increase comfort. Accessories AttachmentBuilt-in mounting points are fully compatible with SmallRig accessory system, such as 14''-20 threaded holes and 38-16 locating holes for ARRI to install Side Handle 2093 and Monitor Mount 2903, Side Handle HSS2426, and a cold shoe mount for microphones, LED lights. Low-Angle ShootingSmallRig Z 9 cage is especially suitable for reducing the burden on the arm when shooting at low angles, and assisting in lens movement. Use ergonomic design, the top handle is comfortable to hold and quick to disassemble. Easy to DisassembleQuick release plate on the bottom of the cage fits directly into a tripod for tripod shooting. It also provides a built-in magnetic spanner for easy access.

Quick Release Clamp and Plate for Arca Standard. The QR clamp and plate is designed for mirrorless and DSLR camera. Attach the QR plate to the camera or camera cage, and then drop it into the receiver. Locked via the side knob screw. Multiple 14 and 38 threaded holes on the bottom for attaching different tripod plate.

SIDE HANDLE FOR CAMERA CAGESmallRig Mini Side Handle 2916 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 14-20 screws are fixed to the side of your camera cage. SmallRig 2916 Any cage featuring two 14-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2999, 2493, 2087 etc.. FOR RIGHT-HANDLEFT-HAND USEHighly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning.. ERGONOMIC DESIGNMade of aluminum alloy and plasticPCABS with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience.. MOUNTING OPTIONSSmallRig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off.. LIGHTWEIGHT PORTABLEIt weighs only 139g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. Note The maximum bearing capacity of the handle is 3.5kg. Please do not overload. .

Compatibility This formfitting camera cage is made for Nikon Z5Z6Z7Z6IIZ7II. And compatible with the HDMI USB clamp of ID 2927 to protect the HDMI USB cable head.. Key Functions To ensure the comfort and safety of hand-held shooting, there are interfaces of the shoulder strap and wrist strap of the cage. Built-in cold shoe at the top of the cage makes it easy to install the microphone. And there is a built-in NATO Rail at the left side of the cage, it can be attached to Nato Clamp Handle 2187 for quickly switching.. Multiple Mounting Interfaces With multiple 14-20 thread holes and 38-16 location holes for Arri. Aim to attach accessories such as Magic Arm 2070, Top Handle 2165, Monitor Mount 2903, etc.. Stable And Anti-twist The cage will hold the camera tightly through a 14-20 screw at the base and an M2.5 screw at the side. To keep the camera stable and no shaking.. Lens Bayonet Protect Two threaded holes are reserved at the bottom of the front end of the cage, which is compatible with the FTZ lens adapter ring 2244, to protect the bayonet of the lens..

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2905 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..

High CustomizationSmallRig V mount battery adapter plate 3204 is designed to provide longer battery life for your camera equipment through V-mount batteries. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. It is suitable for Sony for Canon and other DSLR cameras. Adjustable ArmThis V lock battery plate features an adjustable arm for quick adjustment of the V mount battery position, to get a perfect angle for your battery like vertically or hang it upside down on the rod system. Dual 15mm Rod ClampThis power supply splitter comes with a dual 15mm rod clamp, lock the plate on 15 mm LWS rod system easily and quickly. Rich Output PortsIt comes with an 8V DC, a 14.2V D-TAP and two 12V DC ports, satisfied different requests. 5V2A USB output port to power other external accessories like a monitor, a phone, etc.. Note Do not use in damp environment to avoid short circuit The plate fits most V mount batteries but PAGlink series V mount batteries and Patona Premium Battery for BP-190WS.

Carbon Fiber Box Top FlagSmallRig mini matte box 3575 is designed for DSLRs and mirrorless cameras to prevent sunlight or other straight light from causing glare and flare. The adjustable carbon-fiber top flag blocks sunlight or strong light and also prevents internal reflections with its anti-reflective design. Furthermore, it avoids vignetting in 15 mm focal length shooting. Wide CompatibilityMatte box 3575 fits different dimension lenses up to 95mm via different adapter rings optional model 3383 52-95mm 55-95mm 58-95mm 62-95mm 86-95mm, standard rings 67-95mm 72-95mm 77-95mm 82-95mm or attached directly to 95mm lens. Moreover, its adapter ring fits round CPL, ND filters and other round filters of up to 92.5mm. Besides, it leaves enough space for quick disassembly and adjustment of the round filter. Multiple Installation This matte box enables to install round filters and multiple 4 x 5.65 4 x 4 plug-in filters of up to 4 mm in thickness at the same time. The included filter tray provides all-around protection of the filter with multipoint silicone. It is easy to store and prevents scratches and fingerprints while replacing plug-in filters. If you need extra filter tray, please buy SmallRig 3319 and 3320. For Side Top Flag, please go for SmallRig 3597. Portable CompactThe mini matte box 3575 is made from durable but super lightweight carbon fiber material. Portable and compact, with only 108g without adapter rings. It meets users' common shooting needs and easy for carrying outside.. What You Get1 x mini matte box lite, 1 x 67727782-95 mm adapter ring, 1 x Filter Tray 4 x 5.65, 1 x store pouch.

Save time when mounting or detaching your DSLR or mirrorless camera from its rig or cage with this Quick Release Arca-Type Plate from SmallRig.. The aluminum plate's quick release design secures on an Arca-compatible baseplate.. The plate features rubber pads to prevent twisting and one each 38-16 and 14-20 camera mounting screw..

FITS MOST CAGESmallRig 2093 is locked via two thumb screws and fits cage featuring two 14 threaded holes with 18mm distance on the side. Suitable for all SmallRig Cages, such as BMPCC 4k 6k 2203, A7RIII Cage 2087, GH5 Cage 2049. NOT for M50 Cage. ERGONOMIC WOODEN HANDLEThe wooden handgrip is made of natural rosewood without any painting, which could provide a comfortable handheld shooting for videoshooter. COLD SHOE THREADED HOLESThe handle features a cold shoe on the top for microphone and light, 14 38screw holes on the top allows for mounting magic arm or ballhead for monitor. SWEET DESIGNThe side handle can be adjusted up and down based on your needs. Whats more, with the allen wrench built-in on the top of the wooden handle, it is easy to re-tighten the thumb screws for security. NOTICEIf you want to use it on the other side of the cage, just take off the connection part of handle and change the direction.