Top 10 Best Soldering Braid

of November 2024
1
Best ChoiceBest Choice
KOTTO Solder Wick Braid with Flux No-Clean Desoldering Wick Removal Tool,
KOTTO
KOTTO
10
Exceptional
View on Amazon
2
Best ValueBest Value
Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering
Lesnow
Lesnow
9.9
Exceptional
View on Amazon
3
NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length
NTE Electronics
NTE Electronics
9.8
Exceptional
View on Amazon
4
AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width,
AUSTOR
AUSTOR
9.7
Exceptional
View on Amazon
5
TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid
TOWOT
TOWOT
9.6
Exceptional
View on Amazon
6
No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch
Ferraycle
Ferraycle
9.5
Excellent
View on Amazon
7
Herain No-Clean Solder Wick, Desoldering Braided Wicks with Flux, Desoldering
Herain
Herain
9.4
Excellent
View on Amazon
8
MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5'
MG Chemicals
MG Chemicals
9.3
Excellent
View on Amazon
9
MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder
MIKIMIQI
MIKIMIQI
9.2
Excellent
View on Amazon
10
MG Chemicals - 443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux,
MG Chemicals
MG Chemicals
9.1
Excellent
View on Amazon
11
CCOZN Solder Wicks, 2 Pack No-Clean Solder Braided Wicks Desoldering Wicks For
CCOZN
CCOZN
9.0
Excellent
View on Amazon

About Soldering Braid

Click here to learn more about these products.

KOTTO Solder Wick Braid with Flux No-Clean Desoldering Wick Removal Tool, Solder Sucker Wick Roll to Desolder PCB and Remove Solder for Electronics, 5 ft Length, 0.1 inch Width, 2 Pack Wick

Quicker wicking This Solder wick can be used to remove the unwanted excess solder quickly and efficiently during the solder re-working process or remove some already soldered components. The added Flux gives a faster action and helps the surfaces to be heated and solder to flow, which significantly reduces the solder repair time.. Copper braids The braid desoldering wicks are made of 100 copper wires with fine braids woven together, and have good thermal conductivity. Also using the solder braid will protect the delicate components or electronic circuit boards from damages during solderingreworkingrepairing.. Wick Application The desoldering braid wicks are suitable for industry welding, lab work or home work, practical desoldering tools to clean a joint from excess solder and correct mistakes on small PCB boards, the desoldered components can be used again, bringing lots of convenience for your work.. Easy to use Simply just place the soldering wick against the solder and place heated solder iron tip on it, the soldering wick absorbs the solder due to its high thermal conductivity. By this way, you can remove the solder from the PCB or any metal surface. Leaves slight flux residue that is non-conductive and non-corrosive so it requires no cleaning.. Packages include 2 pcs of no-clean solder wicks, each wick is 5 ft in length and 0.1 inch in width..

Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Remover Tool Solder Sucker 1 piece Desoldering Wick Wire Roll and Disassemble Electrical Components

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. 100 copper wick has fine braid design to promote strong capillary action to pull in excess solder. Available with standard or anti-static bobbins.

AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool

High efficiency solder sucker - the desoldering pump designed with double ring and vacuum open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand. Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm2.5mm3.0mm, length 1.5m, 2 pieces for each size geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs. High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable. Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering. 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size.

TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2mm W 0.08'' L 9.8'

Quality materialsThe Braided Desoldering Wicks are made of 100 copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.. Easy to use the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.. Extensive applications the braided solder wicks are suitable for labs, school, home, and industrial welding work And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.. Low residue design No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.. Warranty If you have any questions, please feel free to contact us at any time. Thank you.

No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)

Package includes you will receive 3 pieces of no clean solder flux pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement. Suitable size the rosin flux pen measures about 14.3 cm 5.6 inches in length, and the solder braided wick is about 1.5 m 59 inches long and 2.5 mm 0.1 inches wide, which is convenient to hold in hand Please check the size carefully before purchasing. Quality material these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents. Practical tools 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards. Wide applications these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through-hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency.

Herain No-Clean Solder Wick, Desoldering Braided Wicks with Flux, Desoldering Wicks Removal Tool Solder Sucker, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components

1.High-quality materials The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.. 2.Geometric braid design The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.. 3.Widely used No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder.. 4.Easy to use Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station.. 5.Ingenuity quality 1 piece of no-clean solder braided wicks 0.078 inch wide, 9.84 ft length, which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time..

MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1" Width, Blue

Oxide-free clean copper. Static free bobbins. Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F ANSIJ-STD-0004. Manufactured under SPC guidelines. Designed to leave a residue that is environmentally safe.

MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 3 Meter Length

Package Include - You will get 1 pack No-Clean Solder Braided Wicks.The color of the label is random.. Appropriate Size - The size of the solder wick is 2.5mm x 3m 0.1inch x 10 ft.. Premium Material - The Braided Desoldering Wicks are made of 100 copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder.. Solder Braided Wicks - The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.. Applicable Occasions - The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board..

MG Chemicals - 443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 25' Length x 0.075" Width, Green

Oxide-free clean copper. Static free bobbins. Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F ANSIJ-STD-0004. Manufactured under SPC guidelines. Designed to leave a residue that is environmentally safe.

CCOZN Solder Wicks, 2 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.1 Inch Width 1.5 Meter Length

Package Include You will get 2 packs No-Clean Solder Braided Wicks. Appropriate Size Package includes 2 pack 2.5mm x 1.5m 0.1inch x 5 ft solder wick. Premium MaterialThe Braided Desoldering Wicks are made of 100 copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder.. Solder Braided WicksThe solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.. Applicable Occasions The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Disclaimer