Top 10 Best Spdif To Rca

Decodes DTSDolby Digital source digital audio to analog 2.0CH stereo audio output RCA LR and 3.5mm Headphone, Supports Digital Audio Input SPDIF Optical, Coaxial - Make sure switch to the correct input on the side. Supports simultaneous RCA LR and 3.5mm Headphone outputs. Make sure the the plastic removed. And the Optical Cable is pushed in completely.. TROUBLESHOOT Signal from the TV goes into SPDIF Optical, or Coxial input of the DA34 and The output of RCA or Headphones will go into your analog speakers or headphones. Make sure the power adapter is connect properly. And all the cables are inserted all the way in. If there is still no sound, please change the TV Audio out to PCM Only from the TV Menu..

PROZOR 192KHz Digital to Analog Audio Converter Converts coaxial or toslink digital PCM audio signals to analog LR RCA and 3.5mm Jack audio simultaneously not capable of being reversed. Input Audio Connector 1 x Toslink, 1 x RCA Coaxial Output Audio Connector 2 x RCARL, 1 x 3.5mm Jack Powered by 5.5mm USB Power Cable Power Adapter is NOT Included Do Not Use Other Plugs, It Can Only Use 5V 1A Plug. Up to 192KHz24bit Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz, 192KHz 24bit S PDIF Incoming Bit Stream on Left and Right Channels. Supports Uncompressed 2 channel LPCM or PCM Digital Audio Signal Output Provides Electromagnetic-noise-free Transmission5.1 channel is incompatible, please set the audio output to PCM or LPCM. Easy to Install and Simple to Operate Can be Used for PS3, PS4, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc.

192 kHz Digital Analogue ConverterAUTOUTLET 192kHz DAC converter is designed for professional audio signal processing. 192 kHz digital analogue converter can easily convert SPDIF optical interface to RCA analog audio interface for stereo amplifier.. Excellent Sound QualityOur optical to RCA converter adopts a built-in professional audio amplifier chip and a dual-channel operational amplifier, which can amplify the RCA output level and make the sound pure and clear. The volume level can only be adjusted on the output device.. Small and Light Built-in RCA Design This product has been specially designed to be small and light. It turns the common RCA connection into a built-in cable design, which greatly reduces the customer's space usage and becomes more convenient, no longer need to find an extra place to put it when using it.. Professional Input Signal ProcessingAnalog to digital audio converter provides 24Bit192KHz sampling rate, professional and higher frequency to avoid distortion of the original signal. Optical input supports signal processing up to 32, 44.1, 48, 96, 192 sample rates, and 24-bit bit streams.. Easy Installation Plug and PlayEasy installation and operation, no software, no driver required SPDIF to RCA converter works great with HDTVs, set-top boxes, DVDBlu-Ray players and game consoles. NOTE It is incompatible with 5.1 channel signal such as Dolby AC3, please adjust the audio output to PCM before use..

Optical to RCA ConverterNeoteck DAC Converter Converts Optical Toslink Digital Audio Signals to Analog RCA Audio, and the Sound is Synchronized without Delay When Connected, Which can Perfectly Work with HDTV, Set Top Box, DVDBlu-Ray Players and Game Consoles.. 192kHz 24bit DACOur 192KHz Digital to Analog Converter Supports Sampling Rate at 32kHz, 44.1kHz, 48kHz, 96kHz and 192kHz, and 24-bit SPDIF Incoming Bit Stream on Left and Right Channels, Making You Enjoy the Most High Quality Sound and Video Feats.. Audio Amplifier ChipsetThis Digital Signal Converter Comes with High-performance Built-in Audio Amplifier Chipset, Whcih can Amplify the RCA Output Level to Ensure A Good Anti-interference Function As Well As Pure and Clear Output Sound .. Simple Plug and PlayWith Built-in RCA Cable,the Analog to Digital Audio Converter is Compact and Lightweight to Hang On the Wall without Taking Much Space. Also, it is Easy to Install and Simple to Operate, Especially Convenient for the Elderly Alone to Use at Home.. PCM Audio FormatsOur DAC Adapter Supports Uncompressed 2.1-channel PCM Digital Audio Signal Output, Providing Electromagnetic-noise-free Transmission.Note Please 5.1 Channel is NOT Compatible, Please Set the Audio Output to PCM.

7ft2.1m SPDIF to RCA ConverterNeoteck optical to RCA cable is used to convert digital optical audio signals to analog RCA audio signals. Optical signals are less susceptible to interference and noise than analog signals, so converting a digital optical signal to analog RCA can result in a cleaner and higher quality sound output, Which can Perfectly Work with HDTV, Set Top Box, DVDBlu-Ray Players and Game Consoles.. Built-in Audio Amplifier ChipsetThis Upgraded Digital Signal Converter Comes with High-performance Built-in Audio Amplifier Chipset, Whcih can Amplify the RCA Output Level to Ensure A Good Anti-interference Function As Well As Pure, Clear and powerful Output Sound, Making You Enjoy the Most High Quality Sound and Video Feats.. 192kHz 24bit DACOur Digital to Analog Converter Enables high-quality audio transmission with up to 192kHz sampling rate and supports multiple sampling rates including 32, 44.1, 48, 96 and 192kHz. What's more, this TOSLINK to RCA converter is Compatible with 24-bit SPDIF incoming bit stream on both left and right channels, ensuring accurate and precise sound reproduction, delivering crystal-clear sound for music, movies, and gaming.. PCM Audio FormatsOur DAC Adapter Supports Uncompressed 2.0-channel PCM Digital Audio Signal Output, Providing Electromagnetic-noise-free Transmission, which can perfectly work with HD TV, Set top box, DVDBlu-Ray players and game consoles Note Please 5.1 Channel is NOT Compatible, Please Set the Audio Output to PCM. Simple Plug and PlayWith Built-in RCA Cable, the Analog to Digital Audio Converter is Compact and Lightweight to Hang On the Wall without Taking Much Space. Besides, it is Easy to Install and Simple to Operate, Especially Convenient for the Elderly Alone to Use at Home.. NOT WORKING1 The converter is designed for 5V 1A power adapters. There is no power plug in the package. Perhaps does not connect the USB cable to the power device, or the USB interface of the device supplies power to our product. 2 May have changed the input or output mode, resulting in incompatibility issues. 3 The power adapter or cable connector is loose, causing the converter to be unavailable. Simply plug it back in, reconnect the product, and start using it.. Note 1Is it compatible with Youtube or Netflix If it does not compatible with Netflix, Amazon Prime Video, YouTube, please go to TV audio settings and change the digital audio output from auto to PCM.. Note 2Can't I control the volume through the remote control The TV is connected to the sound system through the optical interface, so the volume button on the remote control cannot be directly used to adjust the output volume of the TV optical. If the TV supports this feature which depends on the TV itself The TV optical output volume can be adjusted on the Settings of the TV system.Like SONY's TV setting path Settingssound Settingsadvanced Settingsalldigital audio output volume.. Note 3Why does the product produce noise when used 1 Please use a separable 5V 1A power adapter to connect the USB cable to power the DAC. Power supply USB Power Cable - Separable 5V 1A Standard Plug - Power outlet. 2 Replace the RCA or 3.5mm audio cable with a shielded cable.. Note 4Is it compatible with 5.1 Channel Signal Such as Dolby AC3, DTS NOT cormpatible with 5.1 Channel Signal. Please set your TV audio output to PCM Device homepagesystem settingimage and soundvoice settingdigital audio outputPCM. 1. Please set TV audio output to SPDIF output. 2. Please turn on its external speakers Menusoundspeaker settings external speakersON..

192Khz 24Bit sampling rate Support 192Khz 24Bit sampling rate on the optical and SPDIF signal,built-in interference immunity and no signal input squelch circuit Audio Format PCMLPCMPlug-and-play, easy to install and operate. Compatible with PS3, HD DVD, PS4, Sky HD, plasma Blu-ray home theater, AV amplifiers, etc Note 5.1 channel signal is not compatible such as Dolby AC3 Set the format steps Setting--Sound--Audio Format-PCMLPCM. Widely compatible with 32600 headphonesDesigned for game player and music fancier support all headphones within 32600. Volume adjustment knob Built-in volume adjustment circuit and control knob ,completely solve the problem of low volume when using high-impedance headphones used in DAC products , with surging power and full thrust. Bass adjustment knob The 192KHz DAC innovatively designed bass adjustment functionCan provide stunning stereo sound, heavy bass effect, create the perfect environment different from the sound field, gain the effect was very obvious, which makes you reveled in a world by bass. The design of portable and fashion aluminum alloy shell and gold-plated interface improved overall immunity ,it makes the sound clear and pure .Widely compatibility ,it can be used for PS3,PS4,Blu-way player,HD DVD,Home Theatre system, etc. Easy to install , plug and play.

Digital to Analog Audio ConverterSimple solution to convert coaxial or digital optical audio input to analog stereo LR RCA and 3.5mm audio signal output. Make sure to change the audio output format to PCM or LPCM. NOTE It is only a Digital to Analog Audio Converter, not an Analog to Digital Audio Adapter, input and output cannot be reversed.. Support Multiple Sampling RatesSupports Sampling Rate at 32KHz, 44.1KHz, 48KHz and 96KHz 24-bit S PDIF Incoming Bit Stream on Left and Right Channels. Support speakers and headphones play simultaneously. Built-in interference immunity and no signal input squelch circuit, provides crystal clear electromagnetic noise-free transmission. NOTE Do not support 192kHz sample rate audio. Easy to use Simple SettingsConnect the optical or coaxial cable to the signal source and converter, and then connect the RCA or 3.5mm audio cable to the output device and converter. Please set the audio format to uncompressed 2-channel LPCM or PCM in your TV or other source devices. Note 5.1 channel is incompatible, please set the audio output to PCM or LPCM Setting--Sound--Audio Format-PCMLPCM. Wide CompatibilityThis DAC audio converter is compatible with devices with coaxial or toslink digital output, easy to install and simple to operate, no need to install any driver. Powered by USB Cable. Can be Used for PS3, PS4, TV, Xbox, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, etc.. Durable Quality 100 Satisfaction GuaranteeHeavy-duty aluminum alloy enclosure protects the insides and keeps the unit cool by aiding in quick heat absorption and dissipation. Giveet have One Year Free and Lifetime Technical Support. We offer 100 Money Back, free return or replacement service. If you have any problem Such as connection, return, replace, etc, just feel free to contact us, we will give you a timely solution Within 24 hours..

Ultra low jitter and high fidelity design using new receiver DA converter chip. Converts coaxial or toslink digital PCM LPCM audio signals to analog L R RCA and 3.5mm Jack audio simultaneously. NoteWhen connected to the Toslink and Coaxial cables at the same time, converter will give priority to Toslink input.. Input Audio Connector 1xToslink,1xRCA Coaxial Output Audio Connector 2 x RCARL, 1x3.5mm Jack Powered by 5V1A Power Adapter.NOTE Do Not Use Other Plugs, It Can Only Use 5V1A Plug. Supports sample rates including 32KHz, 44.1KHz, 48KHz and 96KHz 24-bit SPDIF Incoming Bit Stream on Left and Right Channels.NOTE Do not support 192kHz sample rate audio. Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output.NOTE 5.1 channel is incompatible, please set your DVD or player audio output to PCM or LPCM, Convert and transfer audio signal only, do not support audio decode. Easy to Install and Simple to Operate Can be Used for PS3, PS4, Apple TV, Xbox, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, etc..

ANALOG-TO-DIGITAL AUDIO CONVERTER Converts The RL Rca Analog Signal Or 3.5mmjack Aux Audio Simultaneously Into Digital Coaxial Toslink Spdif Optical Digitalaudio Cannot Be Reversed.. Supports uncompressed 2-channel LPCMdigital audio signal output. Support output sampling rate 48 kHz.Dolby conversion is not supported and needs to be turned off before use. Noteset the connected device to support audio output before use, and set the audiooutput to PCM or LPCM. Input audio connector 2 x RCA RL,excluding RCA cable, 1x 3.5mm jack AUX excluding 3.5mm audio cable Outputaudio connector 1xToslink including fiber optic cable, 1xCoaxial.. Simple to install and easy to operate. Noinstallation problem with Extral drive. Powered by USB cable. Available forPS3, PS4, Apple TV, Xbox, blu-ray player, HD DVD, AV Amps, etc... Thepackage includes 1 x Analog to Digital audioconverter, 1 x 1m Optical Cable 4.0, 1 x USB Power Cable, 1 xUser Manual. 1x 1.5m 3.5mm to 2-Male RCA Audio Stereo Cable.Its worth noting that the 1m Optical Cable 4.0 and 3.5mm to 2-Male RCA Audio Stereo Cable will increaseconvenience for your use..

Digital-to-AnalogSimple solution to convert digital coaxial or optical audio to 3.5mm jack or RCA LR analog audio signal not capable of being reversed. Plug and playOptical or digital coaxial audio output from your source devices such as HDTV to this converter, then RCA LR or 3.5mm AUX to your headphone or stereo speaker Please set PCMLPCM audio when using. Simple SettingsJust set the audio format to uncompressed 2-channel LPCM or PCM in your TV or other source devices. Sampling rate support 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz 24-bit. Durable QualityHeavy-duty aluminum alloy enclosure protects the insides and keeps the unit cool by aiding in quick heat absorption and dissipation. 100 Satisfaction GuaranteeYears of experience in audio video products allows us to have the ability to provide you with premium quality products and professional support services. If you have any questions before or after purchase, please feel free to reach out to us on Amazon or Google, 100 satisfaction guarantee.