Top 10 Best Stainless Steel Arc Welding Rods 1/8

This Electrode Deposits A Max Of .04 Carbon In The Weld Metal To Minimize The Formation Of Chromium Carbides. Welding Current AC-DCEP, AWS A5.4. Welding Current Ac-Dcep. Item Package Weight 1.086 Pounds.

This electrode deposits a max of .04 carbon in the weld metal to minimize the formation of chromium carbides. Welding Current AC-DCEP, AWS A5.4. Welding Current AC-DCEP.

ER308L 116 332 18 x 36 Stainless Steel TIG Welding Filler Rod.

Premium quality ER309L stainless steel TIG welding rods with available diameters 0.045, 116, 332 and 18 36 length. Package of 1-Lb, 5-Lb and 10-Lb.. Specification AWS A5.9ASME SFA A5.9ER309L 36 914mm length of rod with single end stamped typical chemical composition C0.025, Cr24.5, Ni13, Si0.38, Mo0.35, Mn1.88, Cu0.35, P0.02, S0.01, remainFe.. Features and Applications filler metal ER309L rod for TIG welding GTAW process to weld dissimilar alloys like mild steel and the stainless steels, and also for direct overlay on mild steel for corrosion applications occasionally used for welding 18-8 base metals when severe corrosion conditions exist or dissimilar metals ER309L stainless steel exhibits high strength and good toughness over a wide range of temperatures shielding gas required, usually 100 Argon.. Package of 1-Lb, 5-Lb and 10-Lb ER309L TIG welding rods available. With volume discount. Buy More Save More. U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Solid steel with protective flux coating. Suitable for all types of welding joint, All position welding.. Suitable for primed and slightly rusty parts, relatively insensitive to contamination in the welding area.. 70,000 PSI tensile strength. A low-hydrogen electrode for use in all positions on low, medium and high-carbon steels. The electrodes can be welded to direct current and alternating current Simple ignition and re-ignition.The slag is easy to remove and can also lifts off by itself.

312-16 stainless steel alloy is the ultimate rod for most grades of steel using any stick electrode power source. Can be used by anyone regardless of prior welding experience. Features a superior combination of tensile strength and elongation. item package weight 2.0 pounds.

Diameter 18-Inch. Weight 12. Amperage is 60-110. Weight of 2.1-Pound.

For welding 19 chromium 9 nickel austenitic stainless steels such as 304L, 308 L as well as stabilized grades 321 and 347. The maximum carbon content of less than 0.03 preserves the intergranular corrosion resistant properties of the weld deposit and weld zone, yielding x-ray quality welds. Common applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern suitable for cryogenic applications. Recommended TIG Welding Parameters - DCEN DC- - Recommended Tungsten use 2 Thoriated, 2 Ceriated, 2 or 1.5 Lanthanated or Rare Earth - Shielding gas use 100 Argon or ArgonHelium for greater penetration and higher speeds. READ THIS Main image is for reference only. Please check Picture 2 for an approximate quantity of rods per pound. Available diameters 0.030, 0.035, 0.045, 116, 332, 18, 532 and 316. Available Packages 1 Lb, 2 Lb, 5 Lb, 10 Lb and 11Lb. Select your choice from the size menu options..

ER309L 116 332 18 x 36 Stainless Steel TIG Welding Filler Rod.

Designed for welding hardenable steels. Cold rolled steels, or other steels containing high sulfur or selenium. Low alloy and mild steels when stress relieveing normally would be required but cannot be done. All-position welding.