Top 10 Best Swampfox

Precision CNC Machined from Aircraft Grade Aluminum. This optic picatinny mount made by ADE is to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. Designed to use on ADE RD3-018 SPIKE, Shield RMSRMScRMSwSMS and Romeo Zero Red dot sights.. Also Compatible with Leupold Delta Point Pro, JP Enterprises JPoint and Swampfox Sentinel red dot sights. Does NOT compatible with Holosun 407k507k, user MUST grindlots of grinding to completely REMOVEFlat out the two rear pin to fit 407k507k. Ade has is releasing a new plate made specifically for 407k507k in March 2022. Finished in a Matte Black Anodize. Comes with two screws.

Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero. Optic Shim is made to fit between the red dot and the mounting plate.. Fits Trijicon RMRSRO, Ade Advanced Optics, RD3-019, RD3-020, RD3-023, Holosun HS407CHS507CHS507T and. Also fits Riton X3 Tactix PRD, ADE RD3-011, Swampox KingslayerLibertyJustice. The shim might need to be trimmed to the shape to match some of red dot brand mentioned above.. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree.. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear..

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. This is a PICATINNY rail mount. The red dot optic MUST equipped with a PICATINNY BASE in order to attach to this riser mount.. Some of the red dots comes with picatinny plate with the red dot purchase, such as Vortex Venom and Burris Fastfire. This Picanny riser will fit the red dot factory provided original pictainny plate.. Some of the red dots do NOT come with picatinny plate with the red dot purchase, such as holosun 407k. User need to purchase the picatinny plate separately in order to attach to this riser mount.. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

This Optics Mount Plate is designed to connect Optics Red Dot Reflex Sight to Ruger Security 9 full size and compact size pistols by Replacing the Rear Sight with this Optic Mounting Plate.. Attention This Ruger Security 9 optic plate does NOT fit Ruger SR9 pistol. Ruger SR9 and Ruger Security 9 are completely two different pistols. Torque screw to 15inchlb. For gun glue, we recommend to use loctite treadlocker. This plate fits Vortex ViperVenom, ADE RD3-003,RD3-006, ADE RD3-009,RD3-012and Pro,RD3-015and Pro, RD3-028, RD3-018 Spike, , DocterNoblex Sight C, DocterNoblex sight 2, DocterNoblex sight III,QUICKsight 5.0 VR, Noblex Sight G,Burris Fastfire 2, 3, Delta Optical MiniDot,Delta Optical MiniDot II,Hawke Reflex,Sightmark Mini Shot Pro Spec,Mini Shot M-Spec,Leica Tempus, MAKdot, Vector Optics SCRD-19II Frenzy,Creative XP GlassEagle HD, HEX Dragonfly,CT RAD Pro, Cyelee CALF V2,Vomz Pilad.. Also fits Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 125, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 125, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 120.. Comes with several pairs of screws for ADE, Shield, Holosun, Vortex, Burris red dots. The screws should fits most of the listed red dot but not guaranteed for every red dot. If you need the longershorter screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery. The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off. 1.75 length x1.25 width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting plates for hunguns sells separately.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Designed exclusively to fit Holosun 407k507k and any red dot with the same footprint.. Compatible with Shield RMSCRMS, Sig Romeo Zero, ADE RD3-018 SPIKE, RD3-021 NUWAScrew provided for ADE, Shield, Sig and Holosun. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as JPOINT4, Swampfox Sentine, CT1550, Riton X3 Tactix MPRD. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Trijicon RMRSRO, Holosun 407c507c, ADE RD3-006009012011013015019023.

This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.. This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

IMPROVED ACCURACY - Quick and easy to zero while holding up to strong recoil, this GlassFalcon Red Dot scope promotes rapid target acquisition with a crisp and clear 3 MOA dot.. EASY TO USE - The unique design of our gun sights makes for a hassle-free mount on just about any rifle or pistol setup. A lightweight, compact profile and intuitive controls ensure ease of operation.. HIGH-END OPTICS - All of our rifle and glock sights are tested by optics experts in the USA. The shockproof reflex Sight 3 MOA has been tested for 1000 rounds on all types of guns without losing your zero.. 100 SHOT VISIBILITY - The HD glass offers unbeatable clarity, with 10 brightness levels 8 day, 2 night for any lighting conditions. Perfect for target practice at the range, competitions or hunting. VERSATILE COMPATIBILITY - The weaverpicatinny rail mount is compatible with Vortex, Aimpoint, Holosun, Burris RDS, and more. Its scratch, water, and shockproof, and includes screws and wrenches..

Choose from 3 MOA dot, red circle dot, or green circle dot reticles. RMR footprint scope base for maximum compatibility with pistol slides and included low picatinny mount. Uses CR1632 battery, Change via side tray with no optic re-zero needed with Auto shut off after 4 hours with no movement UP button to wake. 11 illumination settings to match your needs. Weighs only 1 oz in pistol configuration, 1.3 oz with rifle or gun mount. Dimensions 1.8L 1 W and 1.4 H using the long gun mount.

DUTY GRADE DARN RIGHT Other companies are producing slimline pistol dots with plastic bodies and clear polymer lenses. Thats not our style. Sentinel is crafted from CNC machined 7075-T6 aluminum, hard coated in matte black, and features multicoated glass of the same excellent quality used in our long-range precision rifle scopes.. BUT WHAT DOES IT FIT Sentinel is really small. About an inch tall, an inch wide, and 1.6 inches long. Shoehorned into this tiny scope is a 16mm x 16mm window, big enough for fast acquisition and sight tracking, small enough that it doesnt affect concealment at all. Sentinel will any slimline slide with an RMSc footprint incorporated.. BET YOUR SS DEPENDABLE A concealed carry optic must be ultra dependable, because you are literally betting your life that it will be ready when called upon. Sentinel is dunk it waterproof when installed using the included flexible seal that fits between the optic and footprint. It is shock rated to an incredible 1500 G.. MANUAL VS. AUTOMATIC, THE CHOICE IS YOURS Sentinel-M manual features ten manually adjusted brightness settings accessed via digital push buttons. Shake N Wake motion sensing preserves battery life when Sentinel-M has been still for about 4 minutes. With new motion, Sentinel-M resumes its previous brightness level.. Sentinel-A automatic truly never sleeps. A photosensitive sensor on the left side of the body provides dot brightness relative to ambient light conditions. There are no manual controls at all, no Shake N Wake no way for Sentinel-A to be accidentally shut off, ever. Install the CR2032 battery underneath Sentinel-A and youre good to go for two years straight..

Choose from 3 MOA dot, red circle dot, or green circle dot reticles. RMR footprint scope base for maximum compatibility with pistol slides and included low picatinny mount. Uses CR1632 battery, Change via side tray with no optic re-zero needed with Auto shut off after 4 hours with no movement UP button to wake. 13 illumination settings to match your needs. Weighs only 1 oz in pistol configuration, 1.3 oz with rifle or gun mount. Dimensions 1.8L 1 W and 1.4 H using the long gun mount.

DUTY GRADE DARN RIGHT Other companies are producing slimline pistol dots with plastic bodies and clear polymer lenses. Thats not our style. Sentinel is crafted from CNC machined 7075-T6 aluminum, hard coated in matte black, and features multicoated glass of the same excellent quality used in our long-range precision rifle scopes.. BUT WHAT DOES IT FIT Sentinel is really small. About an inch tall, an inch wide, and 1.6 inches long. Shoehorned into this tiny scope is a 16mm x 16mm window, big enough for fast acquisition and sight tracking, small enough that it doesnt affect concealment at all. Sentinel will any slimline slide with an RMSc footprint incorporated.. BET YOUR SS DEPENDABLE A concealed carry optic must be ultra dependable, because you are literally betting your life that it will be ready when called upon. Sentinel is dunk it waterproof when installed using the included flexible seal that fits between the optic and footprint. It is shock rated to an incredible 1500 G.. MANUAL VS. AUTOMATIC, THE CHOICE IS YOURS Sentinel-M manual features ten manually adjusted brightness settings accessed via digital push buttons. Shake N Wake motion sensing preserves battery life when Sentinel-M has been still for about 4 minutes. With new motion, Sentinel-M resumes its previous brightness level.. Sentinel-A automatic truly never sleeps. A photosensitive sensor on the left side of the body provides dot brightness relative to ambient light conditions. There are no manual controls at all, no Shake N Wake no way for Sentinel-A to be accidentally shut off, ever. Install the CR2032 battery underneath Sentinel-A and youre good to go for two years straight..

GIVE ME LIBERTY The 22mm wide window makes Liberty about the same width as a double-stack 9mm Pistol slide. Liberty is a bit easier to conceal than its bigger brother Justice. Liberty is narrower with flush fitting brightness buttons on the left and a top-loading CR1632. Libertys emitter section is also lower profile, allowing iron sights of .365 or higher to co-witness.. JUSTICE FOR ALL Justice is identical to Liberty except for its larger window, measuring 27mm wide. Justice is great for shotguns, carbines, duty or competition pistols where concealing is not important and even faster sight acquisition is desired. Liberty and Justice share the same RMR footprint, and body dimensions underneath the window. In all respects other than window size, Liberty and Justice are identical, and both are fully compatible with standard ALS law enforcement holsters.. SEEING RED AGAIN Liberty and Justice feature high battery life emitters, available as 3 MOA red dot reticles. Other companies claim impressive battery life figures, but those numbers arent true at the daylight bright settings used for everyday carry. Liberty and Justice get about 4,000 hours battery life at daylight brightness. Coupled with Shake N Wake illumination, we estimate once a year battery changes.. BUILT FOR RETENTION HOLSTERS Compatibility issues can be a major headache when adopting a new piece of equipment, but you dont have to worry. There is no need to go holster hunting or invest in an expensive custom holster setup. Liberty and Justice fit securely in all ALS series duty holsters, both optic and holster fully function as intended.. SHAKE IT, BABY Liberty and Justice feature Shake N Wake motion sensing illumination tech to help save battery life. After four minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting. This allows daily carry without wasting battery life..

Prismatic scope with 3X magnification. All the benefits of a red dot plus the built in addition of 3X magnification and great anti-glare, anti-fog, anti-scratch, and hydrophobic glass. Uber long eye relief. This optic is 33 more forgiving of eye placement which facilitates rapid target acquisition. Coupled with Super wide True 10 degree field of view. Trihawk provides 53 ft of view at 100 yards as opposed to less that 36 ft for most of the competition.. Several great reticle choices. All are etched into the glass, so even with loss of battery they still work. 556 308 BDC or 40 MOA Ladder. Red or Green. All come with ten brightness settings. The other six are for those in betweens.. Shake n Wake technology built in. The reticle powers down after 225 seconds of inactivity but instantly powers back on with any movement.. We use our products so Trihawk comes with everything you need, battery, mount, flip up caps, and a honeycomb anti-relfection device.

Do you like rings but greatly prefer the stability of a unified mounting option If so, Hostile Engagement Mount is right for you. This mount provides the option of moving the optic up to 2 beyond the edge of a Picatinny rail This is a superb choice for generous eye relief scopes The Tomahawk and Arrowhead come to mind, although it will work with well with any 30mm tube Low Power Variable Optic LPVO. The entire mount is made from super strong 7075 T6 Aluminum and is finished in a Matte Black hardcoat anodize. To ensure it stays stable and secure T25 torx bolts are used instead of thumb nuts These along with integrated recoil lugs ensure everything stays exactly where you left it One mount with two optics to handle threats near and far with only a tilt of the wrist. As if that wasnt enough, we added a built in RMR footprint, 45 mount for use with an offset back up red dot Kingslayer, Liberty or Justice would all mount up easily with 6x32 bolts.

DUTY GRADE DARN RIGHT Other companies are producing slimline dots with plastic bodies and clear polymer lenses. Thats not our style. Sentinel is crafted from CNC machined 7075-T6 aluminum, hard coated in matte black, and features multicoated glass of the same excellent quality used in our long-range precision rifle scopes.. BUT WHAT DOES IT FIT Sentinel is really small. About an inch tall, an inch wide, and 1.6 inches long. Shoehorned into this tiny scope is a 16mm x 16mm window, big enough for fast acquisition and sight tracking, small enough that it doesnt affect concealment at all. Sentinel will any slimline slide with an RMSc footprint incorporated.. BET YOUR SS DEPENDABLE A concealed carry optic must be ultra dependable, because you are literally betting your life that it will be ready when called upon. Sentinel is dunk it waterproof when installed using the included flexible seal that fits between the optic and footprint. It is shock rated to an incredible 1500 G.. MANUAL VS. AUTOMATIC, THE CHOICE IS YOURS Sentinel-M manual features ten manually adjusted brightness settings accessed via digital push buttons. Shake N Wake motion sensing preserves battery life when Sentinel-M has been still for about 4 minutes. With new motion, Sentinel-M resumes its previous brightness level.. Sentinel-A automatic truly never sleeps. A photosensitive sensor on the left side of the body provides dot brightness relative to ambient light conditions. There are no manual controls at all, no Shake N Wake no way for Sentinel-A to be accidentally shut off, ever. Install the CR2032 battery underneath Sentinel-A and youre good to go for two years straight..

First focal plane FFP Sharpshooter etched reticle stays true at all magnifications. MOA and MIL MRAD reticles paired with 0.25 MOA 0.1 MRAD clicks. Outstanding eye box for ease of use even at high magnifications. Ultra-bright and flat sight picture. Fast focus adjustable ocular. Premium glass coatings. Zero-resettable turrets. Included Low- and High-profile Magnification throw fins.. Included high quality flip caps. 50,000 Round Guarantee.

First focal plane FFP Sharpshooter etched reticle stays true at all magnifications. MOA and MIL MRAD reticles paired with 0.25 MOA 0.1 MRAD clicks. Outstanding eye box for ease of use even at high magnifications. 11 red reticle illumination settings. PushPull locking, Zero-resettable turrets.