Top 10 Best Taper Jig

ASSEMBLY CONTAINS 36 Miter Bar, Base, Adjustable Fence, Knob, Hold Down Clamps, Tape Measure, Abrasive Grip Strips, T-Bolts, Hardware Screws, Washers and Mini Screw Driver. FUNCTIONS Primarily serves as a taper cutting jig for table saw Secondarily operates as a stable straight line ripping jig Your creativity is the limit. PREMIUM BUILD This woodworking taper jig is manufactured with high quality components The base measures 32 x 7-78 with MDF construction and melamine coating on both sides Features a safe and easy-to-use design, indexing marks for easy angle setting, 5 star knobs and hold down clamps to prevent shifting stock, abrasive grip strips to help stabilize your workpiece and detailed instructions for all skill levels. VERSATILE Perfect for cutting tapered compound angles, straight line table saw ripping, making handmade furniture, and a wide range of applications such as making chair legs, building tables, custom built shelves or base cabinets and more. PLEASE NOTE It fits tight and securely in any standard 38 x 34 miter slot.. PLEASE NOTE The taper jig will fit full sized table saws with miter slots x38 and with inside edge of the right miter slot between 3-34 to 4-38 or 5 to 5-58 from the blade and may not be compatible with many job site or bench top saws. Please check your saw before ordering ..

Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.. The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.. Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.. Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.. Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper or 3 inches per foot and full instruction sheet..

The Most PRecise, Versatile Tapering Jig. The MICRODIAL gauge locks in exact incremental taper angles. Precision tapered cutting as accurate as 18 of degree. Works with the GRR-RIPPER 3D PUSHBLOCK system for ultimate safety and control. Set your taper angle by degree or rise and run for last cutting.

INCLUDES 1 Table Saw Taper Cutting Jig with 24 rails with work stops, ergonomic handle, lock knob and laser etched scale. FUNCTION Used as a taper cutting guide for table saws, this easy-to-use woodworking tool helps you to make long rip cuts at angles from 1 per foot 4.8 degrees or up to 3 per foot 15 degrees. VERSATILE Perfect for making angled cuts, projects that require slight tapers or other woodworking projects such as building kitchen table legs, chairs, wooden racks, wedges, and more. PREMIUM Made with a highly durable, yet lightweight aluminum extrusion construction that offers anti-corrosive properties and a high strength-to-weight ratio for heavy duty applications. FEATURES Sturdy construction and design with extruded legs with an anodized finish, a tapered handle with a round head and textured finish, plush an improved laser etched 17 gauge steel hinge plate.

If you have ever had difficulty cutting long tapers on your table saw, this simple to use taper jig will help make that process easy and it will help you do it accurately Featuring the Blade Safe and Short Reach Adjustable Hold Down clamps, this jig is the perfect way to cut chair legs, table legs, furniture angles and a whole lot more. The jig comes with a x 38 lightweight aluminum miter bar that features two steel removable slot discs. There is a disc on either end to prevent any incidental lift out of the slot. For those saws that dont have a T- Slot, the discs may be removed. The miter bar also features spring loaded steel plungers to ensure a snug fit into x 38 miter slots. Simply use the provided hex key wrench to adjust the plungers to achieve the ideal fit.. The Taper Jig also features an easy to use indexing system that helps make quick work of taper cuts. Each index mark equals 1 degree of taper. You may of course simply mark your wood, align your marks with the edge of the taper jig, clamp down your wood using the Blade Safe Hold Down Clamps and make the cut if so desired. The choice is yours. The Taper Jig comes with detailed, full color instructions for safe and accurate jig use.. You can also use the Taper Jig as a straight line ripping jig to give your stock a straight, true edge. To do this, simply remove the miter bar, zero out the jig and use your table saw fence as your guide for the jig. Please take note that the jig has been designed to be use on table saws in which the left edge of the right side miter slot is 4 to 6-12 from the blade.. We have included 3 Blade Safe and Short Reach Adjustable Hold Down clamps that come in super handy when clamping your stock to the jig. Each clamp can be adjusted inward or outward depending on how close or how far it needs to reach to hold down your stock. Unlike other taper jigs, our clamps are made from a composite material that will NOT damage your blade or cutters if accidentally cut into This material also prevents accidental tripping of touch sensitive, safety table saw mechanisms..

Solid Aluminum. Fully extended depth is 13-inches, closed is 7-12-inches. Miter bar is 38-by-34-by-11-inches, can be removed for irregular work. Maximum horizontal opening is 1-34-by-8-inches. Increases operator safety.

INCLUDES - Includes 2 32 Extrusion Tracks, MDF Sleds, 2 Clamping Handles, 1 0-15 x 0.5 Scale, 1 0-7 x 0.25 Scale and 1 Short Span Clamp.. PRECISION - A scale with interlocking teeth sets the angle precisely in quarter-degree increments from 0 to 7. For larger angles, you can switch to the other scale which goes from 0 to 15 in half-degree increments.. ELIMINATE BOTTOM SIDE TEAR OUT - Theres a sacrificial MDF sled on the bottom and quick-release clamps riding in the extrusion tracks. Your workpiece is held down to the sled, rather than against the table of your saw.. CHOICES FOR WIDER STOCK - You can make a sacrificial sled the same size as your workpiece or you can remove the sled and use the Precision Taper Jig riding straight on the table like all the rest. Its your choice.. MADE IN THE USA - Like all Woodpeckers products, the Precision Taper Jig is precisely machined and carefully inspected in our Strongsville, Ohio factory just south of Cleveland..

Made from durable aluminum channel. Reversible for left or right hand operation. Metal hinged grooved outer edges. Designed for both right and left-handed use. Weighs 2 pounds shipped.

NO MORE GUESSING The DCT Taper Gauge Jig Tool Kit Set for Tapering Angle Cutting Wood Tapered Legs and More allows for complete workpiece control when making taper or angle cuts on any radial-arm or table saw Making a taper on a piece of wood is difficult with only a table saw and dangerous attempting free-hand, so this jig with a removable and adjustable stop allows you to make tapers safely and accurately Easily taper table legs or use for construction and remodeling. VARIOUS TAPERS APPLICATIONS Reversible for left-hand or right-hand operation so anyone can cut out items like tapered table legs, tapered waste baskets, magazine racks, molding cuts, and dado cuts The thumb wing nut enables fine adjustment of the jig for all applications up to 24 inches length of jig legs. ACCURATE MEASUREMENT Includes an easy-to-read graduated scale that measures up to 3 inches per foot or 15 degrees of taper Gauge allows you to make adjustments to change the angle to your fence so you saw safely with a consistent and reproducible taper. EASY TO USE Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the marked angle, adjusted taper width until both measurements are equal, set the taper guide against the fence and board against taper guide, align marked angle line to saw blade, and cut moving both the taper guide and wood piece along saw. CONTENTS Package includes 1 pair of jig legs, 1 scale, 1 locking bracket, 1 work stop, 1 handle, assembly hardware, and assembly instructions Wood and saw required, not included.

Peachtrees Taper Jig Mini has been designed to help you cut smooth, precise tapers on your table saw. Cut tapers for table legs, sofas, occasional tables, segmented turning projects, birdhouses, clocks and a whole lot more For the super practical and often necessary projects, the Taper Jig Mini is great for churning out a fist full of shims or opposing wedge blocks for holding your work in place. Easy to store, easy to take with you and easy to use especially on smaller table saws. The included aluminum miter bar can be positioned in three different spots on the base to accommodate a wide range of table saws. The miter bar has adjustable set screws to help remove any side to side play. The miter bar is the industry standard x 38 to fit most table saws. If the miter bar doesnt fit your saw, it can be replaced with a miter bar that does.. Easy to store, easy to take with you and easy to use especially on smaller table saws. The included aluminum miter bar can be positioned in three different spots on the base to accommodate a wide range of table saws. The miter bar has adjustable set screws to help remove any side to side play. The miter bar is the industry standard x 38 to fit most table saws. If the miter bar doesnt fit your saw, it can be replaced with a miter bar that does.. Also made of a composite material and for the very same reason as the clamps, is the adjustable stop. Lets face it, weve all done it where we set a jig or fixture for one project and forget to re-adjust for the next project. If the stop is projecting past the base it will get cut into. We specifically made this stop to take the cut as opposed to damaging your valuable table saw blade.. The Taper Jig Mini also features large, easy to grip knobs and handles. The base has reference marks at inch intervals for and easy setup process. Also included are two anti-slip abrasive strips to keep the adjustable fence from slipping while in use. The base is laminated and protected with a slick melamine surface that also helps prevent bowing and warping. The MDF base provides zero-clearance support for clean, smooth cuts. The base is approx. 7-14''W x 11-12''L x 12'' thick..