Top 10 Best Taramps 8000 1 Ohm

Excellent for voice as well as bass. 2 ohms. Freq. 35Hz 55Hz. 8000 watts. Mono. Led powered monitor. Cable length 5m. Dimensions W x H x D 42 x 25 x 34mm.

INPUT Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit, using good quality shielded cables to avoid noise interference.. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of Head Units found in the market. POWER Power Supply ConnectorThe connector terminal must be connected to the battery's positive pole with a 10mm minimum wire gauge. The connector terminal - must be properly connect to the battery's negative pole with a same wire gauge. The remote terminal must be connected to the Head Unit REMOTE output with a 0.75mm wire. WIRE HIGH LEVEL INPUT Input for high level low impedance signals from the speaker output of the players or multimedia center..

8000 Watts. 1 Channel. 1 Ohm. Full Range. Small size.

15000 watts. 1 ohm.

30000 Watts. 1 Channel. 1 Ohm. 8Hz to 250Hz. Extreme bass.

8000 watts. 1 ohm. Excellent for voice as well as bass. Mono. Bass boost.

MD 12000.1 - 0.5 ohm amplifier is developed with the highest technology and performance for automotive sound systems, in white color, to make your system more sophisticated, It is mono, with a single channel with a maximum power of 12.000 Watts RMS.. It is a FULL RANGE amplifier, playing all frequencies in the right measure for you, Operation class Class D, Number of Channels 01, Maximum power 12.6 VDC - 0.5 OHM 12,000W RMS 12.6 VDC - 1 OHM 7,200W RMS. Input Sensitivity 220mV, Signal to Noise Ratio 95dB, Frequency Response 10 Hz 5 kHz -3dB, Crossover high pass HPF 10 Hz 90 Hz -12dB8th Variable, Crossover low pass LPF 90 Hz 5 kHz -12dB8th Variable, Bass Boost Freq. 35 Hz 55 Hz. Boost 0 10dB, Efficiency 79, Input Impedance 15K ohms, Output Impedance 0,5 ohm, Protection system Output Short circuit, Output Short circuit in relation to the GND, Low Impedance Protection High or Low voltage Protection Thermal protection. Maximum Power Supply Voltage 16VDC, Consumption at rest 3.6A, Maximum music consumption 602.5A, Maximum consumption in sinusoidal signal 1,205A, Dimensions H x W x D 8.976 x 2.755 x 21.653 inches 228 x 70 x 550mm, Weight 17.526 lbs 7.95 kg.

5000 Watts. 1 Channel. 1 2 Ohms. High Efficient. Automatic Impedance.

strength, income and performance are some of the synonyms of this amplifier module, it has a maximum power of 40.000 watts rms at 0.5 ohm, thermal protection and anti short circuit, it is powered by batteries in series.. member of a unique line in its category, delivering extremely high power in medium and large automotive sound systems. emphasis for subwoofer to high midrange, with high tone performance and sound quality.. operation class class d, number of channels 01, maximum power 227vdc - 0.5 ohm 40.000w rms, input sensitivity 330mv level 100 0,5 ohm, signal to noise ratio 95db, frequency response 10hz - 15khz 0.5db, efficiency es 92 0.5 ohm. input impedance 27k ohms, protection system short-circuit to output, short on output compared to gnd, low impedance at output, highlow supply voltage and thermal protection, min. supply voltage 140vdc. maximum power supply voltage 275vdc, consumption at rest 110ma, maximum music consumption 0.5 ohm 91.5a, maximum consumption in sinusoidal signal 0.5 ohm 100hz 183a, dimensions h x w x d 8.98-in x 2.52-in x 22.07-in, weight 12.54lb.