Top 10 Best Tilta Nucleus Nano

The Nucleus-Nano is a revolutionary wireless lens control system specifically designed for handheld gimbal systems.. The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision. The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions.. Includes adapters for Ronin-S and Zhiyun Crane gimbals. Fully compatible with Tilta's Nucleus-M motors controllers G2X gimbal.

Nucleus-M Motor and 55cm 7-Pin to 7-Pin Nucleus-M Motor Cable included.. To power the motors, only one power port on your camera rig needs to be used. Simply plug the P-tap power cable into one of the motors and then daisy chain power to the rest of the motors with the short 7-pin to 7-pin cables. The motors can be powered through a power source that has a voltage output ranging from 7.2V-24V.. The motors are designed to clamp onto 19mm or 15mm rods with the included rod bushings. This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup.. The motors are designed to clamp onto 19mm or 15mm rods with the included rod bushings. This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup.. The motors allow for automatic calibration of the lens as well as manual calibration if you are using lenses that dont have hard end stops at close focus and infinity..

Wireless Lens Focus Control Motor Wireless Hand Wheel Focus Controller Up to 300' Range 5 to 18V, 0.65 to 1Nm Torque Motor 0.8 MOD Standard Cine Gear, Gear RingsControl RunStop, A-B Limits Rosewood-Lined Hand Wheel Multiple Mounting Options Included Includes Hardware, Batteries, USB Cable. Use the Nucleus-Nano Wireless Focus Control System from Tilta to wirelessly control the focus of most DSLR, mirrorless, or cine-style lenses. The core of the system is the pairing of the focus control motor and the focus hand wheel. The units can connect to each other from 300' away, and can be mounted in a variety of ways.. The large Hand Wheel responds with no delay as it wirelessly controls the separately available Nucleus-Nano motor from up to 300' away via 2.4 GHz Wi-Fi, You can also perform runstop functions and set hard A and B limits with the buttons on the wheel for more control over your camera and lens.. Included in the kit with the hand wheel and motor are a mounting baseplate for 95mm lenses, a 15mm rod, a micro-USB motor cable, a 0.8 MOD motor gear, two lens gear rings, attachment plates for the Ronin-SG2 and Zhiyun Crane, mounting screws, and two Allen keys.. Pair this Nucleus-Nano Wireless Focus Hand Wheel Controller from Tilta with the Nucleus-Nano Motor to wirelessly control the focus of most DSLR, mirrorless, or cine-style lenses..

Note The USB mount on the wheel is not allow to connect to power, it is only for data update.The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions.. Includes a P-tap to Micro USB cable for the Nucleus-Nano which allows you to power the motor from a P-tap power output port. The 14.8V output that P-tap ports provide give the motor a much higher torque than if powered through a 5V USB power cable.. The Nano Motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that dont have hard end stops at close focus and infinity via the ability to set A-B limits on the Nano Hand Wheel Controller. Every motor has a 0.8 mod, which is the standard gear size for most cinema lenses. The torque of the Nucleus-Nano Motor at 5.5V is 0.65Nm and at 14.8V is 1Nm.. The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motors power to be drawn from the G2X tilt motors 5V Micro USB output or via a P-tap to 5V Micro USB cable sold separately.The Nano Motor is also able to connect to the Nucleus-Ms FIZ hand unit and hand grips, allowing for a variety of ways to control the motor as you see fit.. The Nano Motor has its own built-in motor drive that communicates directly with the Nano Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the Nano Motor and Nano Hand Wheel Controller to the same channel and you will have full control. The wireless range of both the Nano Hand Wheel Controller and Nano Motor is 300 feet.

SmallRig Attachment Plate 2323 is designed for helping nucleus-nato handwheel to attach on gimbals and any other camera equipment with 14-20, 38-16 and m4 threaded holes.. Multi-Functional Equipped with 14, 38 and M4 screws, SmallRig qr clamp could be used for Ronin S via two m4 screws, for Zhiyun Crane2 via Mountng Clamp 2119, for Moza Air2 via Mounting plate 2319.. Compatible with G2X Gimbal Could used with gimbal with M6 screw not included. Quick Release Design Features a quick release lever and installation mark for installation in few seconds.. More Security The adapter is anti-off designed to prevent the handwheel from accidentally sliding off..

15mm Tube - DC Cable Micro USB to Micro USB - Tilta 2 Year Limited Warranty on Machine Parts and 1 Year on Electronic Parts. Connections DC In, 5-8 V Micro USB. Weight 2.68 oz 76g.

The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button.. The wireless range of both the hand unit and hand grips is 1,000 feet and with the planned upcoming transmission upgrade, the range can reach up to 1 miles This makes it ideal for drone or car-mounted shots.. The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters.. Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the motors and hand unithand grips to the same channel and you will have full control.. The motors are designed to clamp onto 19mm or 15mm rods with the included rod bushings. This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup. Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses. The torque of the Nucleus-M Motor at 14.8V is 2.5Nm.

This kit includes a nano motor, small 15mm rodlens gear belt and WLC-T04-PC USB to USB power cable. The Nucleus Nano Motor is compatible with all DSLR, mirrorless, and modified cine-style vintage photo lenses. The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions. Simply set the Nano Motor and Nano Hand Wheel Controller to the same channel and you will have full control. The wireless range of both the Nano Hand Wheel Controller and Nano Motor is 300 feet.

Tilta Nucleus-Nano Hand Wheel 15mm Rod Adapter - Tightening Toggle - Tilta 2 Year Limited Warranty. Compatibility Nucleus-Nano Hand Wheel. Materials Aluminum-alloy, stainless steel. Weight 0.168 lbs 0.08kg.

The Nano Motor has its own built-in motor drive that communicates directly with the Nano Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the Nano Motor and Nano Hand Wheel Controller to the same channel and you will have full control. The wireless range of both the Nano Hand Wheel Controller and Nano Motor is 300 feet. The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions.. The Nano Motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that dont have hard end stops at close focus and infinity via the ability to set A-B limits on the Nano Hand Wheel Controller. Every motor has a 0.8 mod, which is the standard gear size for most cinema lenses. The torque of the Nucleus-Nano Motor at 5.5V is 0.65Nm and at 14.8V is 1Nm.. The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motors power to be drawn from the G2X tilt motors 5V Micro USB output or via a P-tap to 5V Micro USB cable sold separately.. The Nano Motor is also able to connect to the Nucleus-Ms FIZ hand unit and hand grips, allowing for a variety of ways to control the motor as you see fit..