Top 10 Best Tool Clamps & Vises

Clamp force 660 lbs. and Torque rating 15. 5 Ft-Lb. Jaw Width 3 x Jaw Opening 2. 1 x Throat Depth 1. 57. Minimum Tube Capacity 0. 39 D, Maximum Tube Capacity 0. 75. Pipe jaws are cast-in place. Clamp-on base feature works almost anywhere. Able to attach to tables up to 1. 96 thick. High-strength 30, 000 psi castings. 0. 46D machined steel main screw with triangular M121. 75 threads. 0. 25D x 3. 16 long plated steel screw and handle. 0. 9 x 1. 0 anvil shaping surface incorporated into vise design. No additional hardware needed, ready to use following mounting to work surface.

Universal Table Vise Maximum opening of jaw is up to 3 inch77.5mm, jaw width 2.75 inch70mm, this bench clamp fits most workbench, and kinds of thickness of tables. 0.2 inch5mm thickened jaw provides superior grip.. High Quality Casting Made of high-grade cast steel and chrome-plated spindle and nuts, this table vice offers long-term durability and heavy duty gripping. The jaw adopts quenching and re-fire technology to increase its hardness and strength. The clamping force of the jaw is 300kg. NOTE It is not recommended to increase the lever force, or extend the lever length of the screw rod, or excessive pressure on the screw rod, otherwise it is easy to cause the jaw to break.. 360 Degree Swivel Base The throat capacity is up to 2.4 inch61mm. Build in 360 dergree swivel base, perfect for a wide range of clamping angles. Even if you are a left-hander, you can rotate the vise to the position that suits your work.. Wide Applications This clamp is designed for home, workshop, professional use, general purpose and light work, ideal for woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, etc. It can be used indoors or outdoors.. Easy to Install The oval swivel base design is convenient and quick to install on or remove from kinds of workbench. Non-slip textured surface increases the grip force of jaw, which firmly hold the material, save time and effort when you work. Note The table board up to 2.4 inch61mm thick can be clamped..

HOME VISE Net weight 3.31 lbs, Maximum width of jaw opening 2.5 inch, Jaw width 2.0 inch. EASY TO INSTALL This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove. PROTECT TABLE TOP During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end. WIDE RANGE OF USES This vise can hold a variety of partsO-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work. TIPS Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..

Universal Table Vise With jaw width of 2.75 inch 70 mm, the maximum opening of this jaw is up to 3 inch 77.5 mm, which makes this bench clamp can fit most workbench and tables.. 360-Degree Swivel Base Designed with 360 degree rotate swivel base, this bench clamp is suitable for a wide range of clamping angles. Smooth guide rail makes the screw and handle function smoothly and effortlessly.. High-quality Material The table vise is made of high-grade cast iron, chrome-plated spindle and nut material, and the jaw adopts quenching and re-fire technology to increase its hardness and strength, which is durable for long-term use and reliable to grip.. Easy Installation Lengthened throat design throat capacity up to 2.5 inch is easy to install that it can easily clamp on the edge of all kinds of desktops, effortless and time-saving, convenient to use.. Wide Application Ideal for home, workshop, educational institution, and professional use, providing clamping for light applications, such as cutting conduit, drilling, gluing, woodworking, metalworking, sanding or planing, sawing and so on..

Get total control over your project with the Dremel Multi-Vise. The simple-to-use Multi-Vise securely holds your project in place, providing you the freedom to work with both your hands.. The Multi-Vise is a 3-in-1 attachment featuring a stationary vice for your work piece, a stand-alone clamp, and a tool holder for your Dremel Rotary Tool.. The quick release button on the Multi-Vise allows you to move, check and re-clamp your work piece with ease and convenience. Vise clamps to any work surface up to 2-12 In. thick. Compatible with most Dremel rotary tools, the Dremel Multi-Vise tool holder turns Dremel rotary tools into a stationary sander, grinder or polisher.. 1 Year Warranty USA-Based Customer Service Available by chat, email, phone or visit us at our service center in Racine, WI.

The Rubber Vise Clamp by Wedge Guys is an essential tool for those looking to keep their golf clubs protected while repairing, reshafting, refinishing, refurbishing, replacing, or regripping golf clubs in a bench vise.. HOLDS FIRM At Wedge Guys we believe a firm shaft is better The side ribs on the rubber vise clamp increases friction in your vise with less pressure while the diamond channel locks your shaft in place, keeping your club shaft more firm and steady while you work.. PROTECTED Work on your golf clubs without worry The Wedge Guys rubber vise clamp will help protect your golf club shaft against marring and guard against breakage.. MULTI-USE The Wedge Guys vise clamp is 3.5 long, Made in the USA, and great for a variety of applications for use with any golf clubs including wedges, irons, drivers, putters, and more.. Although the rubber vise clamp is made of high-grade thick rubber, prevents slippage, and keeps your club tight and protected in the vise during repair, be sure not to overtighten.

Support range 0-2 Inch 0-5.5cm, Supports round, square and irregular objects. Color Black, Material Cast Aluminium. Handheld use, compact and handy.. Used for object polishing and drilling. Ideal for holding small parts, Jewelry, Watch, Hobby, Model making, Electronics, Home and Work-Bench and many other applications..

Color Black Material Cast AluminiumHandheld use, compact and handy.. Color Black Material Cast AluminiumHandheld use, compact and handy.. Suitable for flat patterns, text, fine carving and openwork carving, but also for large-scale chisel cut polishing and engraving machine auxiliary fixing, not afraid to hurt your fingers.. Product Quality Problems Can Be Returned Within 90 Days After Purchase. Please note The product has been modified to meet the needs of the customer. If the product received misses some parts, please send an email to our team, we will mail the accessories, thank you.

Made of high quality raw wood, made of high quality metal and alloy fittings. The item can hold the watch safely. Safely remove the back to replace the battery. Wood material does not scratch your case, providing the grip needed for almost any watch repair, safely removing the back of a men's or women's case.. Place the large case in position to openclose the case back and have a thumbscrew for adjustment for different sizes of watches.. Wooden case and movement bracket, different sizes on both sides, suitable for different sizes of watches.. Ideal for maintenance during maintenance or cleaning, suitable for watch repair, jewelry making, hobbies, crafts, etc..

The Table Vise will not deform even under high pressure, the vise is made of cast aluminum, the jaws are made of hardened high-carbon steel alloy, and the movable parts are made of precision milled heat-treated chromium plate carbon steel.. Jaws are 3 x 34 79mm x 17mm with a 2 51mm opening, the clip has a wide enough opening for any workbench or table.. Adjustable and rotates to any possible angle, rubber Jaws for no scratch and firm clamping, enabling you to lock the workpiece in any position.. Rubber on the jaws can be removed to reveal a cross pattern for use on wirerods, The overall design of pliers has laid a good foundation for the smooth completion of your work.. Lightweight, small vise, easy operation, Ideal for holding small parts in Jewelry, Hobby, Model making, Electronics and more..