Top 10 Best Topping E70

Super audio reproduction ability with ultra low distortion The E70 uses ESS SABRE flagship DAC ES9028PRO. ES9028PRO has a 32-bit 8-channel HyperStream II architecture. In the application of E70, every 4 channels are connected in parallel as one channel, achieving high performance and high sound quality at the same time.. Brand new IN conversion A brand new IN conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics SO that we are able to squeeze out the last bit of performance of the DAC chip.. Excellent performance THDN of E70 is already lower than 0.00006 A-weighted, the music restoration is accurate to every detail.. LDAC 24bit96kHz Bluetooth transmission E70 has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDACIAACSBCaptXaptX LL aptX HDaptX Adaptive protocol by Bluetooth 5.1. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect it's digital signal to ES9028PRO to decode.. Newest XMOS XU316 support DSD512PCM768kHz USB input of E70 has a wide range of compatibility Windows 10, Windows 11, MAC, Linux, lOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on newest XMOS XU316 and Thesycon custom driver applicable to Windows, other systems are free of driver, which is stable and reliable..

Excellent performanceThe E70 uses ESS SABRE DAC ES9028PRO. New XMOS XU316 support DSD512  PCM768kHz.THD N of E70 is already lower than 0.00006 A-weighted , the music restoration is accurate to every detail.. LDAC 24bit96kHz Bluetooth5.1E70 has the certification of Hi-Res Audio Wireless and LDAC. It uses new QCC5125 to support LDAC AAC SBCaptX aptX LLaptX HDaptX Adaptive protocol by Bluetooth 5.1.. Multiple output portsE70 has balanced XLR output and single ended RCA output. You can chooseXLR only , RCA only orXLR RCAoutput to for different applications. In addition to the DAC mode with a fixed output level , the E70 also has a DAC preamplifier mode .. Coaxial and Optical InputThe optical and coaxial input of E70 supports up to PCM24bit192kHz and DSD Dop64 audio, which is suitable for digital turntables, disk players, set-top boxes , and game consoles, so that traditional equipment can also give a new sound.. Inputs support Auto Onoff functionE70 auto OnOff function, it will automatically turn on and set to the input which the signal is valid. And when the signal of E70's selection is not valid for 1 minute, E70 will turn off automatically..

Good Sound Quality - With the help of careful design and adjustment, E50 pro- vides a distortion as low as 0.00009 and a dynamic range of 126dB, providing you with perfect sound quality. This also makes E50 suitable for applications high-fidelity PC-HIFI system, mobile phonetablet OTG, CD play- erturntable external DAC, digital broadcastingexternal DAC, TV DAC and so on. Hearing Is Knowing - TOPPING E50 uses the latest high performance DAC chip ES9068AS. With our excellence in design and engineering, it provides realistic and transparent sound quality.And USB supports DSD512 PCM768kHz.USB input has the best performance of E50. It uses XMOS 2nd 16-core processor XU216, which brings the support of 32bit768kHz PCM, DSD512 native high-reso- lution audio and MQA full decoding.It have audiophile quality sound,bring you a better hearing feast. Some upgrades - On the E50, the traditional optical and coaxial input not only supports 24bit192kHz PCM, but also supports Dop DSD64 and MQA rendering.And using CPLD to process the clock and greatly optimize the digital signal, achieved incredible jitter suppression capa- bilities. The use of new technology makes the femtosec- ond crystal and external clock no longer needed to sup- press jitter.And you can choose TRS only, RCA only or TRSRCA output to meet different usages in the systems. 5V Power Supply - TOPPING E50 uses a DC5V power supply, which can be easily accessed almost everywhere. You can power it up by USB port of PC, mobile phone charger or even a power bank.Note The product does not provide a 5V power adapter.. Preamplifier function - E50 has preamplifier function So you can control the output volume on the remote control. This will provide great convenience when connected to a power amplifier or monitor speakers. And also help you leave the budget for a preamplifier.

Bluetooth 5.0 LDAC transmission DX3Pro has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDACAACSBCAPTXAPTX LLAPTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode.. NFCA circuit The new DX3 Pro has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely.. Pre-amplifier function Adapt to different usage scenarios, DX3 Pro has 4 output modes Headphone Amp, Headphone Amp Line out, DAC, and Pre amplifier.. PA3s is the best power amplifier for DX3 Pro PA3s has RCATRS balanced inputs. When used with DX3 Pro, the TRS balanced input can be used to input other audio sources. The output power of 80W x 24, 10THDN, 65W X 24, 1THDN can be adapted to most situations where speakers are used.. Bluetooth headphone amp Bluetooth DAC application Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro, and connect the power amplifier, active speakers or headphones to the DX3 Pro's output, then DX3 Pro becomes your Bluetooth Headphone amp Bluetooth DAC. If your device supports LDAC transmission, you will get even better experience..

Two AK4493S decoding chips TOPPING E30 II uses two AK4493S chips. With dual upgraded DAC chips, it achieves better SINAD, SNR, dynamic range, and noise level.. Plug and playTurn your PC into a HIFI source just by connecting it to the E30 II with a USB cable. E30II applicable to a variety of PC systems. USB input support up to 32bit768kHz, DSD512Active, DSD256Dop.. Optical and coaxial performanceVia the optical and coaxial inputs, enjoy 24 Bit192kHz hifi audio. Breathe new life into your digital turntables, disk players, set-top boxes, and game consoles.. Discrete LNRDTOPPING has implements discrete LNRD circuits in E30 II. This circuit modes out all kinds of noise input by 5V power supply, and effectively lowering the noise floor to 1.5uV.. Pure DAC applicationIn pure DAC mode, DSD signal will bypass the DATT Soft Mute and E Modulator to provide you a puredirect DSD performance..

Supports high-resolution audio The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD0.0004.. Professional performance, instant listening E30 II lite supports playback of audio streams up to DSD512 and PCM768kHz. E30 II lite is widely compatible with operating systems including Windows 10 Windows 11, MAC, Linux and iOSAndroid systems. Simply connect the audio source and use E30 II lite immediately. Only the driver installation and setup is required to use ASIO applications on Windows systems.. Ultra low jitter at all input With excellent detailing, the jitter of E30II lite is as low as -153dB, so there's no need to worry about jtter affecting sound quality.. Coaxial and Optical Good performance and compatibility The optical and coaxial input of E30 II lite supports up to 24bit192kHz, which is suitable for digital turntables, CD players, set-top boxes and game consoles, so that traditional equipments can also give a new sound.. Discrete L NRD The Discrete LNRD circuit filters out the noise of various 5V power input and provides stable power supply of ultra-low noise reference level for E30II lite. With this technology, the noise floor of E30 II lite is lower than 1.9uV..

ES9068AS DAC Chip--- E50 uses the latest high-performance DAC chip ES9068AS. Our excellence in design and engineering provides realistic and transparent sound quality.. The sound quality is good enough for all kinds of applications--- With the help of careful design and adjustment, E50 provides a distortion as low as 0.00009 and a dynamic range of 126dB, providing you with perfect sound quality. This also makes E50 suitable for applications high-fidelity PC-HIFI system, mobile phonetablet OTG, CD playerturntable external DAC, digital broadcasting external DAC, TV DAC, and so on.. Ultra-low jitter for USB inputs, jitter is no longer anxious--- Using CPLD to process the clock and greatly optimize the digital signal, achieved incredible jitter suppression capabilities. The use of new technology makes the femtosecond crystal and external clock no longer needed to suppress jitter.. 5V power supply, anytime and anywhere--- E50 uses a DC5V power supply, which can be easily accessed almost everywhere. You can power it up by USB port of PC, mobile phone charger or even a power bank. Note The product does not provide a 5V power adapter.. All inputs support Auto OnOff function--- E50 auto OnOff function, it will automatically turn on and set to the input which the signal is valid. And when the signal of E50's selection is not valid for 1 minute, E50 will turn off automatically..