Top 10 Best Topping Pre90

TOPPING Pre90 Preamplifier Fully balanced amplifier structure for both balanced and single-ended signals. Pre90 could set volume memory for each input or volume memory for each output. More easy operation with the remote controller.. Selectable XLR RCA output The output of Pre90 could be config to XLR only, RCA only or XLR RCA . Therefore, the amplified signal can be connected to two different amplifiers. Good combination with EXT90 D90.. Ultra-high Performance NFCA modules It provides excellent DC and AC performance. Ultra-low noise of 0.3uv is milesahead of the competition, giving an absurdly high dynamic range of 145db and no audible noise and darkest background.. Ext90 could extend you more inputs A standard Pre90 provide you 1 x RCA and 1 x XLR stereo inputs. But when it working with a Ext90, they could provide totally 2 x RCA and 4 x XLR stereo inputs. This is enough for multi source systems.. Relay volume control A large number of high quality Japanese small signal relayIsed fovolume control of Pre90. Brings the advantages of precise control remote control, longevity, and complete channel balanceIf the volume was set high while turn on or switch in, Pre90 will automatically reduced to a safe volume to avoid your speakersheadphones blown by sudden high volume..

Pre90 adopts full balanced structure. The output can be balanced, sin- gle- ended, balanced single- ended.. With the balanced single-ended two-way input, in addition to the normal preamplifier usetage. Pre90 can be used for balanced to sin- gle- ended orsingle -ended to balanced signal conversion.. With the help of maximum gain 16 dB, Pre90 could easily amplify the weak input signal to acceptable level of next amplifier.. It is worth men- tioning that since the noise is as low as 0.3uVrms, this step does not bring in audible noise while amplifying the signal..

Pre90 adopts full balanced structure. The output can be balanced, sin- gle- ended, balanced single- ended.. With the balanced single-ended two-way input, in addition to the normal preamplifier usetage. Pre90 can be used for balanced to sin- gle- ended orsingle -ended to balanced signal conversion.. With the help of maximum gain 16 dB, Pre90 could easily amplify the weak input signal to acceptable level of next amplifier.. It is worth men- tioning that since the noise is as low as 0.3uVrms, this step does not bring in audible noise while amplifying the signal..

Headphone-amp Pre-amp The NFCA modules of A90 are not only able to drive the headphone but also apply to be the pre-amp. When it is in pre-amp mode, the 20ohm SE and 40 ohm balanced output impedance are widely suitable for various-power amplifiers Ultra.. Full balanced SE Headphone Output A90 has three output headphone jacks of 4-PIN-XLR, 4.4 balanced and 6.35 SE to meet different usages.. 3 Step gain setting adapt to various sensitivities A90 is equipped with three gain settings of -95dB0dB9.5dB for SE and-35dB 6.0dB15.5dB for balanced. The SE 25Vpp balanced 49Vpp high output voltage.. High output current drive capability A the amp driving low impedance headphones with ease Ultra low noise of 0.2uV is miles ahead of the competition giving absurdly high dynamic range of 145dB and no audible noise and darkest background for the most sensitive IEMS.. Ultra-high Performance NFCA modules A90 implemented the first member of the new NFCANested Feedback Composite Amplifier module series Voltage Current hybrid feedback architecture along with UHGFultra high gain feedback technology rovide excellent DC and AC performance. Note Any question, please contact us, we will help you solve it, please don't return it directly..

MQA DAC D90se is a new D90 decoder with better performance and wider support for MQA. OPT, COAX, USB and AES can support MQA rendering and decoding.. Bluetooth 5.0 LDAC transmission D90SE has the certification of hi-res Audio Wireless and LDAC. It uses CSR8675 chipset to support LDACAACSBCAPTXAPTX LLAPTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of CSR8675 and connect it's digital signal to ES9038PRO to decode.. Selectable output D90SE has balanced XLR output and single ended RCA output. You can choose XLR only RCA only or XLR RCA output to for different applications.. Plug and play D90SE has a wide range of compatibility, Windows 10, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications,you need to install the driver and set it up.. A90 will be the best headphone amplifier for D90SE Full balanced NFCA module, 0.2uV ultra low noise. 0.00006 ultra low THD N0.1 ohm output impedance, wide gain setting high output voltage, almost suitable for driving all kinds of headphones..

Dual ESS ES9038Q2M SABRE HIFI DAC Chips, MQA Full Decoding via USB. Support DSD512 Native and PCM 768kHz, MQA Full Decoding via USB. 2nd Generation 16 Core XMOS XU216, 4-PIN-XLR and 6.35mm Headphone Output. THDN as low as 0.00010, 1300mW X2 Output Power. DAC Pre amp applicaion Bluetooth receiverTablet and phone DAC application.

Complete support of LDAC,APTXHD,XBC,AAC, and the exquisite 24bit192kHz UAT format. Apart from ES9038 flagship DAC we coupled this DAC with ES9311 power chip designed for ESS DACS to optimize ES9038 performance to its max potential.. All digital inputs support DSD decoding. DoP64 is supported through coaxial and optic.. The power source is implemented with shielded low noise conditioner. This improves both sound quality and power efficiency.. UAT Ultra Audio Transmission, an audio coding technology self-developed by HiBy with up to 192kHz sampling frequency or up to 1.2Mbps bit rate. There are three available settings high 1.2Mbpsmedium 900 kbpslow 600 kbps..

The THDN of D30Pro is no higher than 0.00009 which means the D30Pro accurately restores 99.99991 of the original sound. The 4 x CS43198 provide a total of 8 full balanced channels. So each channel of the D30Pro will be arranged in parallel by 4 conventional balanced channels. The increase in output capability will bring changes in the sound and the spec will also improved.. USB support DSD256 PCM384k Hz high resolution audio D30Pro uses 2nd generation 8 core XMOS XU208, USB supports up to PCM32bit 384kHz and DSD256 native. With the help of customized Thesycon driverfor Win 7 or above, your PC will have better performance on ASIO playback. Mac needn't a driver to achieve ASIO Connect directly to the PC without installing the drivers, set the sampling rate you want, then enjoy Coaxial and Optical input support Dop DSD64 PCM24bit192kHz .. D30Pro has full balanced XLR output and single ended RCA output. You can choose XLR only , RCA only orXL RRCA output to meet different usage in the multi- ple systems.. CPLD focusing on clock processing and digital signal optimization, restoring what the digital signal should be..

Flagship DAC chip AK4499, the audio industry's highest performance.. The latest Bluetooth supports APTXHD, SBC, AAC and the industry's highest specification 24bit192kHz UAT format. Support MQA full decode No matter where you are, it s like being on the scene.. USB uses the second XMOS XU216,support native DSD and 32bit 768kHz. Support LVDS level differential I2 S reception using HDMI interface, it can accept the lowest jitter digital audio.