Top 10 Best Tormek Knife Jig

Used for Most Knives with a Width of 1-34-Inches. Longer Knives need to be Stiff. It can also be Used for Carver's Draw Knives. The Jig Rests Freely on a Universal Support. The Universal Support can be Placed Vertically or Horizontally.

The holder is designed to securely hold the knife without damaging the handle. There is really no limit to how small a blade you can sharpen. Works in conjunction with the knife jig.

Made for Long, Thin, Flexible Knives. It's Width can Stabilize and Support Longer Blades. Works the Same Way as the SVM-45. Adjustable Clamp and Stop. Rests on the Universal Support.

For Blades of any Length. Minimum Width of Blade is 12-Inch. The Tool is Guided Precisely and Ground Flat along its Whole Length. Can be Pre-Set to a Fixed Depth. Grinding angle is set with superior accuracy.

Made for Fingernail Shaped Turning Gouges. Quickly Produce a Repeatable Razor Edge. Can be Used for Various Lengths on the Side Bevel. Can also be used for Bent Carving Gouges, V-Tools and Violin Making Knives. Maximum Width of Blade is 1-38 Inch.

A complete sharpening system for hand tools this bundle combines the Tormek T-8 water-cooled sharpening system with the HTK-806 Hand Tool Sharpening Jig and Accessory Kit. The HTK-806 Hand Tool Kit includes 6 jigs for sharpening hand tools like knives, scissors, axes, carving tools, and comes with its own storage case. The Tormek T-8 is Tormeks most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel. Includes Tormek T-8 Original, WM-200 Angle Master, PA-70 Honing Compound, TT-50 Diamond Truing Tool, SP-650 Stone Grader, SE-77 Straight Edge Jig, SVM-45 Knife Jig, SVM-00 Small Knife Jig, SVM-140 Long Knife Jig, SVA-170 Axe Jig, SVX-150 Scissor Jig, SVS-38 Short Tool Jig, TC-800 Storage Case. Its a sharpening shop in a box. Note This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..

A complete sharpening system for hand tools this bundle combines the Tormek T-4 water-cooled sharpening system with the HTK-806 hand tool sharpening jig and accessory kit. The HTK-806 hand tool kit includes 6 jigs for sharpening hand tools like knives, scissors, axes, carving tools, and comes with its own storage case. The Tormek T-4 Original is Tormeks 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel. Includes WM-200 Angle Master, PA-70 honing compound, SP-650 stone grader, SVM-45 knife jig, SVM-00 small knife jig, SVM-140 long knife jig, SVA-170 axe jig, SVX-150 scissor jig, SVS-38 short tool jig, TC-800 storage case. Its a sharpening shop in a box. Note This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..

This bundle combines the Tormek T-8 water-cooled sharpening system with the jigs trusted by chefs around the world.. This Tormek T-8 Chef's Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the SVM-45 for your knives, the SVM-140 for the longer knives, and the SVM-00 for small knives. Also included is the SVX-150 for your scissors. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy.. The Tormek T-8 is Tormeks most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel. Includes Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, SVM-45 Knife Jig, SVM-140 Long Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover. Note This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..

Tormek T4 bushcraft is prepared for nature. Sharpen your knives and axes like a professional. The dual grit sharpening stone turns at just the right speed - 120 RPM. This allows your tools and knives to be honed to the perfect edge without overheating. Jigs are locked in and rock solid for consistent and repeatable results on the universal support arm. Sharpen a wide variety of outdoor knives, hunting knives, fishing knives, and different types of axes. The t-4 bushcraft has a solid cast frame of zinc, In which the machine's main components are housed in. Tormek believes this product will last for years and we offer a 7 year warranty. Tormek has a complete line of additional jigs and attachments that will make your T4 bushcraft edition a sharpening workhorse for years to come. Warning THIS machine operates at 115 volts and is designed to work exclusively in North America. Please be aware that if you plan to use this product in a country that operates at 220 240V, you will burn out the motor and damage the machine.. The bushcraft Package includes svm-45 knife sharpening Jig and sva-170 Axe sharpening Jig. No knives or axes are included with purchase..

Steel cabinet has a scratch-resistant powder coating. Custom made drawers. Sleek design with rounded corners. Adjustable working height. Perfect fit for Tormek Storage Trays HTK-00, TNT-00 T8-00.