Top 10 Best Toyota Reverse Camera Wiring Harness

Factory Camera Retention Harness with 6 Volt Power Adapter Combo. Use this harness to retain the factory reverse camera when adding an aftermarket radio.. Retains the factory back-up camera to an aftermarket radio. Use with aftermarket radio that has a backup camera input feature only- usually radio with video screen. 12 volt to 6 volt converter adapter included.. Compatibility Notes New aftermarket radio must have backup camera input capability. Might work with more vehicles- if the connector looks like the one in the picture then this should work or email us your year and model for us to double check. This is not plug and play- requires some manual wire connections.. Works with the following vehicles Scion FR-S 2016, iM 2016, tC 2016 Toyota 4-Runner 2014-2019, 86 early build, before 12-17 2018, 86 2017, Avalon wo nav 2015-2018, Camry 2015-2016, Camry late build, 1214 onward 2014-2014, Corolla 2014-2019, Corolla iM 2017-2018, Highlander 2014-2019, Prius One, Two, Three, Three Touring 2018, Prius 2016-2019, Prius C 2015-2019, Prius Prime Plus 2017-2018, Prius V 2015-2017, RAV4 2015-2018,. RAV4 after build date Nov. 2013 2014, Sequoia 2014-2019, Sienna 2015-2017, Tacoma 2014-2019, Tundra 2014-2019, Venza 2015, Yaris 2018-2019.

T harness For 2012-2013 4-Runner no factory amp, 2013-2014 Avalon, 2012-2015 Prius, 2012-2015 Prius PHV, 2012-2014 Prius V, 2013-2015 Rav-4, 2013 Sequoia, 2012-2013 Tacoma with Nav, 2013-2014 Venza, 2012-2013 Camry.. Backup camera wireing harness For Scion 2013-2015 FRS, 2014-2015 iQ, 2014-2015 tC, 2014-2015 xB, 2014 xD. Subaru BRZ 2013-2015. Other vehicle may not fit.. Use this harness to retain the factory reverse camera when adding an aftermarket radio. Please contact us if you receive a wrong package. RED WOLF reverse camera T harness must use with aftermarket radio that has a backup camera input feature only- Vehicle must be equipped with a 6.1 inch touch video screen and have 16-pin connector like advertising picture.. It do not comes with 12 to 6 voltage step down adaptor . So if your factory backup camera is not capable of being powered by 12 volts but 6 volts, you should have to find 12 to 6 voltage converter at your side..

Replacemenet For Toyota 4-Runner 2014-2019, 86 2012-2018, Avalon wo nav 2015-2018, Camry SE and XLE 2012-2014Camry 2015-2016-2017, Corolla 2014-2019, Corolla iM 2017-2018, Highlander 2014-2019, Prius One, Two, Three, Three Touring 2018, Prius 2016-2019, Prius C 2015-2019, Prius Prime Plus 2017-2018, Prius V 2015-2017,RAV4 after build date Nov. 2013 2014, RAV4 2015-2018, Sequoia 2014-2019, Sienna 2015-2017, Tacoma 2014-2019, Tundra 2014-2019, Venza 2015, Yaris 2018-2019.. Replacemenet For Scion FR-S 2016, iM 2016, tC 2016. Use this harness to retain the factory reverse camera when adding an aftermarket radio OR add a new backup camera. T harness must use with aftermarket radio that has a backup camera input feature only- Vehicle must be equipped with a 6.1 inch touch video screen and have 24-pin connector like advertising picture.. It do not comes with 12 to 6 voltage step down adaptor . So if your factory backup camera is not capable of being powered by 12 volts but 6 volts, you should have to find 12 to 6 voltage converter at your side..

Use this harness to add an aftermarket camera to factory radio.. Works with display and navigation model radios only Use with radio that has a backup camera input feature only- usually radio with video screen. 16 pin connector.. Compatibility Notes Only works with factory radios with the Display screen or Navigation radios. Aftermarket camera will need the rca video plug to work with this. Might work with more vehicles if the connector looks like the one in the picture.. Works with the following vehicles SCION Scion FRS 2013-2015, Scion iQ 2014-2015 , Scion tC 2014-2015 , Scion xB 2014-2015 , Scion xD 2014-2014 TOYOTA 4-Runner without a factory amp 2012-2013 , Avalon 2013-2014 , Camry 2012-2013 , Highlander 2013 , Prius 2012-2015 , Prius PHV 2012-2015, Prius V 2012-2014 , Rav-4 2013 , Sequoia 2013 , Tacoma with NAV 2012-2013 , Venza 2013-2014. This wire harness does not have a 12 volt power wire. If new camera needs 12 volt power you will have to find that power wire somewhere else..

Connects an Aftermarket Back-Up Camera Not included to select 2012-15 Scion and OEM Factory Toyota Navigation and Color Display Stereos. Compatible with 16 Pin Back-Up Camera Connectors. Direct Connection to the factory harness without cutting any wires. Manufactured with factory quality wire and connectors. Backed by Scosche's Lifetime Warranty and Lifetime Tech Support.

IMPORTANT NOTE 1. This car radio wiring harness is suitable for Toyota cars with factory backup camera, it's not suitable for the car with JBL amplifier. B08CSCB492 is for Toyota car with JBL amplifier 2.We get feedback that some customers do not know how to check whether the harness is suitable for his car. In order to avoid unnecessary trouble or loss, if you are not sure whether the harness is suitable for your car, pls make sure send message to us, we will help you, thank you very much. Compatibility1. Toyota Corolla 20132019 2.Toyota Reiz 20092013 3.Toyota CHR 2018 4.Toyota Highlander 20152018 5. Toyota Camry 2012-2015 6.Toyota RAV4 2013-2019 etc. These model and years above are just for reference, it can fit a lot other Toyota models as well as long as your car connector is same. This harness only can support 9'' and 10.1'' universal stereo with 16PIN connector, pls check the defination in the picture.. FeaturesSupport Toyota car with Factory OEM Backup Camera, Steering Wheel Control and USB.. Compatible for aftermarket radio with 16pin power socket only Plug and Play to factory car connectors, no need to cut original car wiring.. we have all toyota harness available for different car specs, if you are not sure which harness you need, please feel free to inquire seller. thanks..

Retains OE back-up camera for radio replacement applications. Allows addition of an aftermarket backup camera sold separately to factory systems. Prewired 6 volt output wire for OE camera retention when used with PAC RP4.2-TY11 radio replacement interface. Integrated 6-volt output wire can be used for powering an aftermarket back-up camera 6-volt models only when adding camera feature to OE radio. For Toyota 2016 Scion FRS, IM, and TC vehicles, all trim levels.

Retains the factory backup camera to an aftermarket radio.. Allows an aftermarket camera to be added to the factory screen Display and navigation model radios only.. Includes the AXCSD-6V 12-volt to 6-volt converter..

Compatible Car Models Toyota Basic models with none JBL amplifier. 1. Toyota Corolla 20062019. 2.Toyota Reiz 20092013. 3.Toyota Yaris 20182013. 4.Toyota Hilux 20052018.. 5.Toyota RAV4 20062018. 6.Toyota Camry 20002011.7.Toyota FJ CRUISER 20072018. 8. Toyota Highlander 20082014. 9. Toyota Land Cruiser Prado 20022013. etc. Support Steering Wheel control, original USBif your original car has, Radio Antenna Adapter integrated for aftermarket radio with 16pin power socket, Plug and Play to factory car connectors, no need to cut original car wiring.. Note It can not fit for Toyota models with no OEM camera and factory JBL amplifier Fit for android aftermarket radio with 16pin power socket only. we have all toyota harness available for different car specs, if you need different harness, please feel free to contact seller..

Note The radio harness car with Canbus adapter ONLY for android car stereo with