Top 10 Best Ubec

Input 5.5V-26V 2-6 cells Li-Po battery pack,Output Voltage 5V 3A.. Special for RC Air Plane FPV image transmission.. All epoxy sealed containers with waterproof housing non-isolated.. With overload over-current over low voltage protection, stable performance.. Light compact,convenient to use and transportauto recovery..

Output Voltage 5V 3A Size 43 x 17 x 7mm Weight 11g Input 5.5V-26V 2-6 cells Li-Po battery pack or 5-15 cells Ni-MH battery pack. Electronic devices are protected by shielding, which greatly reduces electromagnetic interference and ensures the normal operation of the receiver. Lightweight and Compact. Notice This is not an electrical switch, just independent UBEC, can't connect the motor. Designed with switching power supply structurefrequency 300KHz, over-current and over-temperature protection, and the chip efficiency is as high as 92. It has the protection function to prevent the polarity of the power supply. If the power supply is accidentally connected, will not damage the UBEC.

Package 1 Piece External UBEC 3A 5V Receiver Power Supply, Much higher efficiency than liniar BEC, that means less heating and longer battery life.. Output 5V 3A, Power Input 5.5-23V, Weight Approx. 11g, Ripple Less than 50mVp-p 2A12V. Advanced switching power supply structure design, the frequency of switching power supply main control chip is 300KHz, with over current and over temperature protection function, chip efficiency is up to 92.. Covered with a shield for protecting components, compact size, light weight, more convenient to use.. With the protection function for reverse polarity connection protection of the power supply. If the power supply is accidentally connected, it will not cause damage to UBEC..

Adopt the most advanced synchronous rectification switching power supply control chip design, with over-current and thermal protection, the chip at maximum efficiency as high as 93.. Continuous output current capacity of 4A peak output current capability of 6A, fully guaranteed equipment, demand for electricity.. The output line to configure the filtering magnetic ring, greatly reduces the electromagnetic interference and ensure the receiver to work.. Has a feature to prevent reverse input polarity, input power supply polarity mistake will not damage equipment.. Has a working state indicator, when the output to normal when the indicator light..

Input voltage 7V-25.5V 2-6S LIPO 6-16 cell Ni-Mh. Output voltage 5V 6A or 6V 6A. Current 6A peak 8A less than 15 seconds. Weight 14g. Size 39 x 21 x 6 mm LxWxH.

10A peak continuous current 6A, support input 2-6S LIPO.. BEC Output is adjustable from 5V5A--6V5A by the JUMPER.. Smaller,lighter,specially designed for Airplane, multicopter and some other DIY project.. Can in combination with OPTO HV ESC or PDB Board of FPV.. TWO years of free warranty ..

RC 5V 3A 12V 2A FPV adjustable BEC UBEC. Output 5V 3A or 12V 2A. 12V output if short connect. Special for RC air plane FPV image transmission. Light compact, convenient to use and transport.

UBEC-3A 5V Mini UBEC for FPV gimbal telemetry devices.. UBEC voltage converter to create 5V ouput voltage from 2-6S battery pack input voltage.. Dedicated to RC airplane FPV gimbal telemetry image transmission.. This UBEC is ideal to provide FPV cameras brushless gimbals with a constant 5V voltage.. Easy to carry and install, providing stable performance, can be a replacement for old one or a spare part..

Adopt the most advanced synchronous rectification switching power supply control chip design, with over-current and thermal protection, the chip at maximum efficiency as high as 93. Output current, continuous output current capacity of 6A peak output current capability of 8A, fully guaranteed equipment, demand for electricity. The output line to configure the filtering magnetic ring, greatly reduces the electromagnetic interference and ensure the receiver to work. Has a wide voltage range of 7V-25.5V can be within the normal work. Has a feature to prevent reverse input polarity, input power supply polarity mistake will not damage equipment.

3.1 It adopted the advanced DC-DC regulator chip with conversion efficiency exceeds 90. 3.2 4 options for the output voltage, applicable for all kinds of receiversgyrosservos, etc.. 3.3 It owns BEC shoot-through protection, which prevent the input voltage from directly flowing to the output end and causing damages to receivers, servos and other electronic devices. 3.4 It featured other protections like over-current protection, short-circuit protection at the output end and thermal protection make the use more safe and reliable. 3.5 Two cables are connected in parallel at the output end of the UBEC, allow larger current to flow into the receiver. It has one status LED, which lights up when the output voltage is within the normal range The external switch can turn onoff the UBEC easilyExquisite aluminum case is helpful for heat dissipation EMI Electromagnetic Interference reduction..