Top 10 Best Ubiquiti Point To Point

Two installation methods This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you.. 150 degree adjustment The rod of wireless bridge bracket mount can be adjusted up and down by 150. After you install the CPE, adjust the angle of the rod to receive signals of different strengths.. Firmness This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod.. Waterproof The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which makes this bracket mount a good waterproof performance. Its very suitable for outdoor use.. Wide application This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some AP can also use it..

UeeVii CPE-452 is an outdoor high power and 5.8G high-performance wireless bridge, that supports point to point and point to Multi-Point wireless connections. Pairing can be done by dialing without having to access the GUI, making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional, and saving much human work and cost.. CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the transmission rate between 2 wireless bridges to reach 300Mbps, the highest wire network speed that can be achieved max is 100Mbps. To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter.. Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM. Trees will not block the transmission speed of the point-to-point internet wireless bridge, suitable for shop warehouses or garages next to your house.. Point-to-point bridge easily helps you expand the network range to the second buildingbarn, shop, warehouses, garages, or wireless extend the IP camera monitoring range. IP65 Level weatherproof shell that ensures continued operation in harsh outdoor environments, very suitable for outdoor use, with rain, dust, and antifreeze characteristics.. Support PoE power supply 50 meters power supply, easy to install, and save cost, and compliance with 5.8GHz IEEE 802.11a, IEEE 802.11n standard, support CSMACA, CSMACD, TCPIP, PPPoE, DHCP, ICMP, NAT protocol. FCC ID 2A6EJ-CPE450.

CPE450 is a 5.8G Long Range WiFi Extender Outdoor Wireless Bridge CPE with an LED display. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional. 100Mpbs digital display bridge, transmissionreceiver automatic networking, support point-to-point, point-to-multipoint, transmissionreceiver flexible switching. WDS networking mode, video network dual compatible.Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability. Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standardsFCC. Supports dynamic MIMO power saving mode DMPS and automatic power-saving transmission APSD supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM. The FCC ID 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions1This device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies The frequency range that complies with FCC Rule Parts 15E is 5180.1-5240.0 MHZ and 5745.0-5825.0 MHZ.

2 UNITS Ubiquiti NanoStation Loco M5 READY TO INSTALL, featuring a panel antenna and dual-polarity performance, the NSLOCOM5 is ideal for Point-to-MultiPoint PtMP applications requiring high-performance CPE devices with a sleek form factor.. Ubiquiti NanoStation LocoM5 features the CPE design that expanded the global Wireless ISP industry.. Ubiquiti versatile airOS firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services.. Ubiquiti airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.. NanoStation locom5 can be deployed for Point-to-Point PtP bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE..

Pole Mounting Kit Included.

Easy to use. Highly durable Product. Easy to install. Manufactured in China.

ubiquiti cpe acess point.

Expert Pre-Configured Bundle A set of two NanoStation Loco M5 devices, meticulously optimized by our team of experts to function as a Point-to-Point Wireless Bridge.. Bundle Includes Configuration Applied, 2 Paired NanoStation Loco M5 Ubiquiti, 2 POE Injectors with Power Cords, 2 Straps, Installation Guide.. Robust Performance Experience unparalleled performance with the expert pre-configured NanoStation Loco M5 bundle.. Maintain Configuration Important Do not reset the devices to factory settings as this will result in the loss of the applied configuration.. Seamless High-Speed Connection Create a reliable and high-speed point-to-point wireless connection effortlessly..

Operation mode AP, Client, WDS Frequence 5,4 - 5.825 GHz. DHCP yes Transmission speed 300 Mbps. Standards 802.11an Chipset Atheros. TX Power regulation yes Max.output power 27 dBm. Sensitivity -96 dBm Modulation OFD.

Ubiquiti NanoStation M2 NSM2 2.4GHz 2x2 MIMO IndoorOutdoor airMAX CPE - Router 802.11n 2-Pack. Featuring a panel antenna and dual-polarity performance, the NanoStation M is ideal for Point-to-MultiPoint PtMP applications requiring high-performance CPE devices with a sleek form factor.. The NanoStation M features the CPE design that expanded the global Wireless ISP industry.. The NanoStation M can be deployed for Point-to-Point PtP bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE.. With software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration..