Top 10 Best Ubiquiti Point To Point Bridge

What can the CPE58G wireless bridge help you do Extend your house network to the second building, such as garages, barns, shops, and even neighbors, without having to layout network cables, saving costs.. 5.8G Technology IP65 Level Waterproof 5.8G frequency makes long-range WiFi bridge has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference, better than 2.4 G traditional CPE CPE58G bridge IP65 weatherproof is very suitable for outdoor use, with rain, dust, and antifreeze.. 2KM Working Distance Built-in 12dBi directional antenna can significantly improve the transmission and reception performance of wireless signals, actual application distance should be less than 2KM Barrier-free. Trees will not block the transmission speed of the point-to-point internet wireless bridge, suitable for warehouses, barns, shops, or garages next to your house.. 100Mbps Wired Speed The transmission speed between 2 wireless WiFi bridges max is 900Mbps, but the highest wired network speed that can be achieved max is 100Mbps via RJ45 port. To achieve the wireless bridge function, one needs to act as a slave bridge and the other one as a master bridge.. The FCC ID 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions1This device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies The frequency range that complies with FCC Rule Parts 15E is 5180.1-5240.0 MHZ and 5745.0-5825.0 MHZ.

CPE450 is a 5.8G Long Range WiFi Extender Outdoor Wireless Bridge CPE with an LED display. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional. 100Mpbs digital display bridge, transmissionreceiver automatic networking, support point-to-point, point-to-multipoint, transmissionreceiver flexible switching. WDS networking mode, video network dual compatible.Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability. Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standardsFCC. Supports dynamic MIMO power saving mode DMPS and automatic power-saving transmission APSD supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM. The FCC ID 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions1This device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies The frequency range that complies with FCC Rule Parts 15E is 5180.1-5240.0 MHZ and 5745.0-5825.0 MHZ.

UeeVii CPE-452 is an outdoor high power and 5.8G high-performance wireless bridge, that supports point to point and point to Multi-Point wireless connections. Pairing can be done by dialing without having to access the GUI, making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional, and saving much human work and cost.. CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the transmission rate between 2 wireless bridges to reach 300Mbps, the highest wire network speed that can be achieved max is 100Mbps. To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter.. Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM. Trees will not block the transmission speed of the point-to-point internet wireless bridge, suitable for shop warehouses or garages next to your house.. Point-to-point bridge easily helps you expand the network range to the second buildingbarn, shop, warehouses, garages, or wireless extend the IP camera monitoring range. IP65 Level weatherproof shell that ensures continued operation in harsh outdoor environments, very suitable for outdoor use, with rain, dust, and antifreeze characteristics.. Support PoE power supply 50 meters power supply, easy to install, and save cost, and compliance with 5.8GHz IEEE 802.11a, IEEE 802.11n standard, support CSMACA, CSMACD, TCPIP, PPPoE, DHCP, ICMP, NAT protocol. FCC ID 2A6EJ-CPE450.

2 UNITS Ubiquiti NanoStation Loco M5 READY TO INSTALL, featuring a panel antenna and dual-polarity performance, the NSLOCOM5 is ideal for Point-to-MultiPoint PtMP applications requiring high-performance CPE devices with a sleek form factor.. Ubiquiti NanoStation LocoM5 features the CPE design that expanded the global Wireless ISP industry.. Ubiquiti versatile airOS firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services.. Ubiquiti airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.. NanoStation locom5 can be deployed for Point-to-Point PtP bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE..

Easy to use. Highly durable Product. Easy to install. Manufactured in China.

CPE820 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.. 1000Mpbs digital display wireless bridge, transmissionreceiver automatic networking, support point-to-point, point-to-multipoint, transmissionreceiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 433Mbpss.. 1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, using 5.8G IEEE 802.11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability. Outdoor wireless bridges adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards. Supports dynamic MIMO power saving mode DMPS and automatic power-saving transmission APSD, supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatically re-pair when power is restored after a power outage.. Point to point wireless bridge built-in 16dBm directional antenna, maximum 27dBm can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM.FCC ID 2A6EJ-CPE450.

CPE028 is an outdoor high power and high-performance CPE, which works at 5G frequency. It supports Point to Point and Point to Multi-Point wireless connection. The transmission speed between 2 bridges max is 300Mbps. The highest network speed that can be achieved max is 100Mbps. To achieve the CPE function, one needs to act as a receiver and the other one as a transmitter.. 3KM Transmission distance 3 km visible unobstructed environment, actual application distance should be less than 3KM. Built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house.. Low Interference 5G frequency makes it have better anti-interference performance, good compatibility, and strong anti-adjacent channel interference, better than 2.4 G traditional CPE it can automatically adjust to the optimal transmission speed according to the actual signal strength and transmission distance.. Support PoE power supply 50 meters power supply, easy to install, and save cost, and compliance with 5.8GHz IEEE 802.11a, IEEE 802.11n standard, support CSMACA, CSMACD, TCPIP, PPPoE, DHCP, ICMP, NAT protocol..

Ubiquiti 2 PACK Networks NBE-5AC-GEN2 NanoBeam ac Gen2 airMAX ac CPE with Dedicated Management Radio - Ball Joint Mount - Lock Ring - Metal Strip - Gigabit PoE 24 V and 0.5 A with Mounting Bracket - Power Cord - Ubiquiti Networks 1 Year Limited Warranty. Power Supply 24V, 0.5A Gigabit PoE Adapter Included. Max. Power Consumption 8.5W. Gain 19 dBi Gen2. Frequency 5 Ghz.

Pole Mounting Kit Included.

ubiquiti cpe acess point.