Top 10 Best Ubiquiti Wifi

UeeVii CPE-452 is an outdoor high power and 5.8G high-performance wireless bridge, that supports point to point and point to Multi-Point wireless connections. Pairing can be done by dialing without having to access the GUI, making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional, and saving much human work and cost.. CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the transmission rate between 2 wireless bridges to reach 300Mbps, the highest wire network speed that can be achieved max is 100Mbps. To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter.. Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM. Trees will not block the transmission speed of the point-to-point internet wireless bridge, suitable for shop warehouses or garages next to your house.. Point-to-point bridge easily helps you expand the network range to the second buildingbarn, shop, warehouses, garages, or wireless extend the IP camera monitoring range. IP65 Level weatherproof shell that ensures continued operation in harsh outdoor environments, very suitable for outdoor use, with rain, dust, and antifreeze characteristics.. Support PoE power supply 50 meters power supply, easy to install, and save cost, and compliance with 5.8GHz IEEE 802.11a, IEEE 802.11n standard, support CSMACA, CSMACD, TCPIP, PPPoE, DHCP, ICMP, NAT protocol. FCC ID 2A6EJ-CPE450.

CPE450 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor Wireless Bridge CPE with an LED display. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional. UeeVii offers a 2-year warranty and lifelong technical support.. 100Mpbs digital display bridge, transmissionreceiver automatic networking, support point-to-point, point-to-multipoint, transmissionreceiver flexible switching. WDS networking mode, video network dual compatible.Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability. Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standardsFCC. Supports dynamic MIMO power saving mode DMPS and automatic power-saving transmission APSD supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM. The FCC ID 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions1This device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies The frequency range that complies with FCC Rule Parts 15E is 5180.1-5240.0 MHZ and 5745.0-5825.0 MHZ.

2x2 high-efficiency Wi-Fi 6. 5 GHz band 2x2 MU-MIMO and OFDMA with radio rate of 1.2 Gbps. 2.4 GHz band 2x2 MIMO with radio rate of 300 Mbps. Gigabit Ethernet, powered with 802.3af PoE. 802.3af PoE adapter not included.

Indoor, dual-band WiFi 6 access point that can support over 300 clients with its 5.3 Gbps aggregate throughput rate.. Dual-band WiFi 6 802.11ax. 5 GHz 4x4 MU-MIMO band with a 4.8 Gbps throughput rate. 2.4 GHz 2x2 MIMO band with a 573.5 Mbps throughput rate. Operates at full 4x4 MIMO with 160 MHz bandwidth. 300 concurrent client capacity. Guest Traffic Isolation, which enhances wireless network security and lowers traffic congestion. Includes universal mounting plate, backing plate, and screw kit. PoE injector sold separately.

1.3 GHz dual-core processor now upgraded to support full-duplex 1 Gbps TCPIP performance.. Four-stream high-efficiency Wi-Fi 6 technology.. 5 GHz band 4x4 MU-MIMO and OFDMA with radio rate of 2.4 Gbps.. 2.4 GHz band 4x4 MIMO with radio rate of 600 Mbps.. Powered with 802.3at PoE PoE injector not included..

Ubiquiti Networks 6 Pack UAP-AC-PRO UniFi Access Point - Mounting Bracket - Ceiling Backing Plate - 4x Flat Head Screws M3x50 - 4x Keps Nut M3 - 4x Screw M2.9x20 - 4x Screw Anchor M3x20 - 48V 0.5A Gigabit PoE with Mount Bracket - Power Cord - Quick Start Guide - Ubiquiti Networks 1 Year Limited Warranty. Networking Interface 2x 101001000 Ethernet Ports. Port 1x USB 2.0 Port. Buttons Reset. Power Method Passive Power over Ethernet 48V, 802.3af802.3at Supported Supported Voltage Range 44 to 57VDC.

The BeaconHD is a 802.11ac Wave 2 access point that plugs into an AC wall outlet to quickly extend wireless coverage and improvement throughput.. Establishes bidirectional uplinks to nearby UniFi access points.. 5 GHz 802.11ac, 4x4 MU-MIMO band with a 1.733 Gbps throughput rate.. Improves the radio rate of nearby WiFi devices.. Note The UAP BeaconHD plugs into an AC wall outlet..

Ubiquiti 5-PACK UAP-AC-PRO PN UAP-AC-PRO-5-US. Important -5-Packs Do Not Include PoE Power Injectors.  Assumes use of PoE Switch or Must Purchase 802.3af PoE Separate. 3x3 11AC MIMO Dual Band 5 and 2.4GHz. 2 101001000 Ethernet with 5 GHz Speed 1300 Mbps and 2.4GHz Speed 450 Mbps. Indoor Outdoor Use See Outdoor Specifications for Details.

Package Dimensions 41.91 H x 29.21 L x 29.21 W centimetres. Package Weight 7.076 kilograms. Country of Origin China.

Ubiquiti Networks 5 Pack UAP-AC-HD-US 802.11ac High Density Wave 2 Enterprise Wi-Fi Access Point - WallCeiling Mounting Kit - Ubiquiti Networks 1 Year Limited Warranty. Networking Interface 2x 101001000 Ethernet Ports. Buttons Reset. Power Method Passive Power over Ethernet 48V, 802.3at PoE Supported. Voltage 44 to 57 VDC.