Top 10 Best Video Signal Tester

Support IP camera, Analog camera and HD camera Testing. Emit 650nm highlight red laser to test optical fiber problems. TDR breakpoint test function can measure the cable length or the distance between breakpoint and instrument. Optical Power MeterIt supports wave lengths of 850nm1300nm1310nm1490nm 1550nm 1625nm, 6 wavelength correction point.. The cable tracer supports normal network cable tracking, PoE switch cable tracking, coaxial cable tracking.

Fault distance Measures cable length and display the distance to fault, graphical wire mapping, opens, shorts.. PoE PING PoE identify PoE presence and detect how much voltage. PING to test network performance, data packet, min max time.. AC Filter Tone trace cable with complete AC Interference Rejection, available on common switch PoE Switch, much stronger than other tracers on markets.. Hub blink To locate network port by the flashing port light on a serverswitchhubrouter port.. Addtional Benefits TF card included to export data to PC Voltage detector included in receiver 90-1000V Rechargeable Lithium battery for more efficient work..

CCTV Monitor Tester Upgraded 5.0-inch 800 x 480 high-resolution analog camera tester with clear picture quality and supports PALNTSC standard video signals. Support CVBSAHDTVICVI camera test. Maximum support 8MPAHDTVICVI, Only Supports Analog Cameras. CCTV tester is specially developed for on-site installation and maintenance of analog cameras and high-definition coaxial cameras, providing many useful functions, such as video display, pantilt control, DC12V output power, audio testing, image generation Adapter, VGA video signal input, HDMI1.0 inputIt is Suitable for Testing DVRNVR, RS485 data search, cable test, LED lights, etc.. PTZ controller The video surveillance tester has built-in Pelco-DP PTZ control protocol, etc. Through the built-in RS485 interface, the user can control the up and down, left and right rotation of the PTZ, and can adjust the zoom, focus, and aperture size in one machine.. UTP test The tester supports UTP cable testing, displaying the UTP cable connection status, cable type and wire sequence, and reading the test box number.. CCTV tester DC12V 1A output power supply, use the DC12V power supply output by the tester to power the camera, and it can work continuously for 11 hours after being fully charged.noteThe device cannot be used at low voltage. When the device prompts low voltage or low battery, you need to stop using it and charge it .

H.265H.264, 4K video display via mainstream. 19201200 resolution.NoteThe product box and manual are generic and include all functions.The actual function of this product is subject to the description.. RJ45 cable TDR test, cable quality test. Rapid, auto view video, and create testing report.. Dual window test, IP Analog camera test. TesterPlay, tester, android version mobile phone and PC display at the same time.. HDMI output, 1080p. Quick officeexcel ,word ,PPT format doc. UTP cable tester.. Customers self update software. Built in WIFI, create WIFI hotspot. IP discovery , shortcut button, drop-down menu. DC12V 2A, DC48V PoE power output..

Our CCTV Tester with 7 inch IPS touch screen IP Analog SDI AHD TVI CVI tester, 1280800 resolution. Powerful network tools to help you detect and set various network parameters, Support CVBS camera test and PTZ control. Built-in WIFI, create WIFI hot spot. 10 100M LAN Port, H.265 H.264, 4K video display via mainstream. Built-in Lithium Ion Polymer 7.4V 5400mAh Battery, Working time lasts 10 hours. TDR test. IP discovery. Auto login and view video, creating testing report. DC12V 3A power output, POE DC48V power output, Max power 24W, Support 101001000M ETHERNET test, network state and traffic display, PING test, IP address scan, port flashing etc, with audio in, support record and save the audio LED lamp, calculators, music players and other application tools. HDMI input and output, 1080p. Self-installing Android APP, Please just install APP on cameras to keep the system stable. It has built-in various camera test tools, Compatible with almost all models' cameras, such as DAHUA, HIKVISION, Samsung and Axis. Use it to make your installation efficient and easy. Video record and playback, POE power output, PTZ control, screen snapshot 4 x zoom. Support TDR Digital Multi Meter Optical Power Meter VFL, We have tested every CCTV Tester when this product appear in Amazon website to ensure product quality assurance, if there any further questions, Please feel free to contact us. And we offer 24 hours technical support.

The new HD coaxial camera tester is developed for the on-site installation and maintenance of HD coaxial camera, having TVI, AHD and CVI. It also provides many useful functions, such as video display, PTZ Control over Coax, PTZ controlRS485, DC12V output power, audio test, LED lamp etc.. 5 Inch VS 4.3 Inch This new version of cctv camera tester is design with bigger screen and higher image resolution to provide you with brighter test experience. 5 HD high image resolution monitor enable to show clear image that fits any place to use.. Equips with Lithium battery of high capability. Each 4 hours recharge will last 4-5 work hours when applied to test work.AHDTVI CVICVBS and CCD power supply without. Best system equipment for installing and inspecting engineering. Build-in Li battery video-in terminal and DC power supply. Palm size, easy to carry and operate.. With ADSL Detection Function.Strict quality control management friendly customer supports.Any questions,feel free to reach us,we are always at your disposal..

The new HD Coaxial tester is developed for the on-site installation and maintenance of Analog Camera CVBS and HD Coaxial Camera, having TVI,CVI, AHD. NOT Support IP Camera. It also provides many useful functions, such as video display, PTZ control, DC12V output power, audio test, image generator, VGA video signal input, HDMI1.0 signal input, RS485 data searching, cable testing, LED lamp etc.. Support CVBS AHD 5MP TVI 5MP CVI 4MP Camera Test, 4-In-1 CCTV Tester Monitor.5.0 inches 800 x480 High-resolution view angle display, more intuitive and easy to display the camera image quality, support PALNTSC standard video signal.. PTZ controller Video monitor tester built-in Pelco-D P PTZ control protocol,etc. , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus,aperture size.. VGAHDMI Input It support VGAHDMI 11 compliant digital input,once connect VGAHDMI video,please switch selector to select VGAHDMI Mode,The maximum resolution is 19201440. Video monitor tester, High-resolution 5.0 inches 800 RGB x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PALNTSC standard video signal.. DC12V 1A output power Power the camera with DC12V 1A power output from the tester. It is helpful for demo and testing when the power supply is not available. Rechargeable Built-in 2600mA battery X 2,after charging 3-4 hour, working time lasts 11 hours..

The updated new HD CCTV Test monitor with high 800480 resolution allows displaying HD camera and other camera images in top quality.Updated version equipped with UTC Function. Automatic video signal detectionAHD TVI CVI CVBS.PTZ control support by RS-485.Coac and UTP cables test feature offers simple problem solving capability.. Equipped with high capacity 3000mA Lithium battery which is sufficient for 6 hours of working time.And power output function12V5V 1A maxis extremely helpful when other power supply is unavailable.. HDMI input support 720IP,1080IP, which will automatically switch to HDMI modeHDMI input is optional.VGA input will assist in configuring the recording device when there is no local screen.. The monitor and wrist strap design is ergonomic for convenient use at any time and in any place..

Model IPC-9800MOVTADHS plus. Full Features. 7 inch IPS touch screen, 19201200 resolution. Support Digital Multimeter, Optical power meter, Visual fault locator, TDR cable test and Support H.265, H .264, 4K,OVIF, PoE, WiFi, 101001000M Ethernet, RS485, Audio in, LED lamp, Built-in 7500mAhBattery.. Coaxial HD camera test. 8MP TVI camera, 8MP CVI camera, 8MP AHD caemre, 8MP SDI camera, CVBS camera test and PTZ control. Built-in auto HD software, view the coaxial HD AHD TVI CVI can automatically identify. UTC control and call OSD menu. RS485 control, Baud 600-115200bps, compatible with more than 30 protocols such as PELCO-DP, Samsung, Panasonic etc.. 12MP 4KH.265H.264 IP camera test. Rapid Video Auto view the video, create testing report. IP DiscoveryQuick OVIFIPC test RTSP play Client APK. Hik test toolpressing just one key to activate Hik camera , Image test, modify the user name, PW and IP parameters. DH test tool DH camera test, modify the username, PW and IP parameters. 101001000M Ethernet.Built in WiFi, create WIFI hotspot.. Power Built-in 7.6V Lithium polymer battery , 7800mAh59.28Wh, after charging 4 hours, normal working time 15 hours. InputDC12V 2A Output DC24V 2A, DC12V 3A, DC5V 2A. PoE IEEE802.3afat 48V, max power 25.5W.. 1 year free warranty. Language English, Chinese, Korean, Russian, Italian, French, Polish, Spanish, Japanese etc. DimensionNet weight 9.4 x 5.3 x 1.4 inch1.03kg2.27lbs..