Top 10 Best Vna

The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50KHz-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.. We add Sma to Bnc connector for testing Bnc connector. We add one uhf antenna and one vhf antenna for comparing..

4.3 inch Large Touch screen and powerful functionHandheld Vector Network Analyzer using 4.3-inch IPS TFT LCD screen, with a larger view angle and can be seen clearly in strong outdoor light.which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on.. Higher Capacity Battery,and Longer Standby time Upgraded the large capacity 5000mA-h 3.7V battery, longer standby time, and extended USB interface. Typically, it can be used as a mobile power source to charge Android or Apple phones when not in use. The IC is charged by high current 2A, and the charging time is shorter.. Upgraded Aluminium Housing Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.. Measurement Range The NanoVNA-F measurement range is 50k-3GHz. You can go to the official website to update and expand the frequency to 10Khz-1.5Ghz.The harmonic expansion of the output signal of the clock chip SI5351 is used to measure the frequency to 1000MHz. At 600M-1GHz, the dynamic range of S11 is 40dB the standing wave ratio is less than 1.02.. Compact and Powerful Upgrade the user program by virtual U disk.Switch to a power switch with a greater sense of operation and a better sense of operation.Support Chinese and English menu switching..

Specialty--Demo Kit VNA test board demo calibration board for learning Vector Network Analyzer , Antenna Analyzer test calibration learning.. 18 functional modules--The board is totally integrated with 18 functional modules.Can be used to measure 30MHz short wave low-pass-filter LPF,100MHz FM high-pass filter HPF,433MHz commonly used SAW band pass filter BPF,6.5MHz ceramic trap BSF.. Safe and reliable--Each module is well selected of high quality and great reliability,practical, has a long service life.. Easy to carry--The board is small and light ,suitable for carrying with.Easy to operate and use.. RemindPlease note that this product only contains 2 UFL Patch Cords. If you need to change the connection multiple times, it may cause inconvenience. Please purchase with caution, or purchase a ufl patch cord for replacement..

with multiple internal RF switches for S11 and S21 measurements, and IFFT calculations for TDR and DTF measurements.. the LiteVNA-64 now brings faster scanning speeds and more scan points in addition to a wider measurement range. Combined with an easy-to-use interface consistent with the NanoVNA, the LiteVNA-64 can now be easily used as a field test tool.. With a measurement range of up to 6.3GHz, the LiteVNA-64 is capable of meeting common amateur radio and IoT applications, as well as emerging 5GHz testing, enabling the application of the latest 5.8GHz wifi and 5.8GHz image transmission.

Vector network analyzer use 0.5ppm TCXO to guarantee high frequency measurement accuracy. The complete metal shell can totally protect the internal accurate circuit while considering the protection of the external interface. High-performance calibration kit to guarantee that the calibration SWR is less than 1.03 when up to 3GHz. Made of aluminum alloy material, light weight with good strength and good corrosion resistance. This product possess stable structure and excellent performance, practical and accurate analyzer.

A small, portable, battery powered vector network analyzer with a wide frequency range from 50kHz to 3GHz. Able to measure S11 reflection coefficient and S21 transmission coefficient. A beautiful 3 inch, 320240 display with 1950mAh rechargeable lithium-ion battery. System dynamic range when calibrated is 70dB from 50kHz to 1.5GHz and 60dB from 1.5GHz to 3GHz. Minimum return loss is 20dB at 1.5GHz and 13dB at 3GHz. 1024 sweep points with USB mode along with NanoVNA-QT software and 201 points when data is displayed on the screen. A SOLT calibration kit is included in the package and 2 male to male SMA RF coaxial cables. MicroUSB interface for charging and personal computer connection is included in the package.

NanoVNA is an open-hardware vector network analyzer which will allow you to test most of your RF equipment with ease. The 2.8 TFT touch screen has a simple interface that allows you to measure S-parameters, SWR, phase and produce Smith charts. It has a frequency capability is 50kHz-900MHz, but it is possible to extend this range with appropriate custom firmware. At just 85mm x 54mm, PCB case protection with a 400mA battery, NanoVNA is ideal for portable measurements and operation. Unlike cheaper clones, our NanoVNA includes EMI shielding on the RF circuitry. Support open hardware developers Kits are assembled in North America and have a 6 month warranty.

2022 UPGRADED HW V3.6 NEW HW VERSION V3.6 with MicroSD card port now can have the measurement data or the screenshots saved in the it at anytime. Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable original PCB needs OTG cable, see a clear HD image on your phone. Added a case, which is protective and dust-proof. Disply 2.8 inch TFT 320 x240. IMPROVED FREQUENCY ALGORITHM The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. MULTIPLE FUNCTIONS The default firmware main function is used for antenna performance measurement. The TXRX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. Designed a practical and simple control application on PC, you can download touchstoneSNP files for radio design and simulation software. STRONG AND SECURE POWER SUPPLY This VNA is battery powered or USB powered Built in 650mAh battery, could work for 2 hours continuously, if need extra working time, it can be connected to power bank or power source.. NOTE Our nanovna is only compatible with low-speed and supports SPI mode SD card for now Package include NanoVNA host with battery display 2.8 inch TFT x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1.

RF Test Board --RF Demo Kit RF test board demo calibration board for learning Vector Network Analyzer , Antenna Analyzer test calibration learning.the RF test board is useful for beginners who want to discover the secrets of spectrumvector analyzer.. The Filter--Short-wave low-pass filter LPF 30MHzFM high-pass filter HPF 100MHzCommonly used SAW bandpass filter BPF 433MHzVideo ceramic trap BSF 6.5MHz. Specification --RLC series and parallel circuit Includes R, L, C and combinational circuitsOpen short circuit and load calibration circuitThe attenuation circuit.. 18 Functional Modules 2 Pcs Of Ufl Patch Cord-- The board is totally integrated with 18 functional modules.Equipped with 2 pcs of UFL patch cord for convenient use.Each module is well selected of high quality and great reliability.The board is small and light ,suitable for carrying with.. Quality Assurance-- 100 brand new and the quality of our products is guaranteed and can be used without hesitation. If you have any questions during use, please feel free to contact us..