Top 10 Best Vortex Cantilever Mount

This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.5. Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

The ADE HM8 optic mount allows the user to mount a varieties of Red Dots at a 45 degree angle alongside your primary magnified optic for optimal aiming versatility when the situation gets up close and personal.. The ADE HM8 optic mount attaches to either side of a Picatinny rail to accommodate left or right handed shooters.. Compatible with Any red dot with footprint of with Doctor footprint, such as Vortex VenomViper, Burris Fastfire, ADE RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 red dots. Compatible with Any red dot with footprint of Triijicon rmr footprint, such as holosun 407c507c, ADE RD3-020, RD3-023. Also works with Holosun 407k507kESP red dots. Compatible with Any red dot with footprint of Shield RMSRMSc footprint, such as Leopold Deltapoint Pro, Sig Romeo Zero, Hex Wasp, Swampfox Sentinel.

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

Use this cantilever mount for mounting 30 mm telescopic sights.. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches 40.39 mm from the base. Weighs 6.7 ounces. Aluminum construction. Weighs 6.7 ounces.

Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting. The cantilever ring mount positions the center of the riflescope tube at a height of 1.435 36.45mm from the base.. Made with pride in the USA.

Use this cantilever mount for mounting 34mm tubes.. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.574 40mm from the base..

This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style rifle.. The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on your rifle.. This mount positions the center of the riflescope tube at a height of 1.45 inches 37 mm from the top surface of the Picatinny base.. The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish.. Weighs 8.9 ounces. Made with pride in the USA..

Provides extra rail room for rear Back Up Iron Sights BUIS when using the StrikeFire red dot along with the VMX-3T magnifier. The cantilever ring will move the StrikeFire forward about one inch.. Use this cantilever mount in conjunction with the Tactical 30mm Ring to mount the Viper XBR crossbow scope. The 1-inch offset of this cantilever mount positions the scope in a forward location, allowing for correct eye relief and head placement.. Provides absolute co-witness mounting height of 37 mm. Will work with most 30 mm red dot sights..

Dual ring scope mount for mounting standard 1 inch tube rifle scopes. Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount. Mounts to any flat top Picatinny rail equipped rifle. 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position. 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings.

Use this cantilever mount for mounting 1-inch telescopic sights. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement. The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches 40.39 mm from the base. Weighs 6.7 ounces.. Aluminum construction. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

The Viper PST Gen II takes incredible performance and rock solid tactical features to new heights. The 1-6x24 second focal plane riflescope is incredibly versatile and ideal for close to medium range shooting scenarios.. Shooters who dial their turrets for bullet drop and wind compensation will appreciate the laser etched turrets, adjustable parallax and the RZR zero stop. A fiber optic rotation indicator ensures you can keep track of your turret position with ease.. The reticle offers shooters highly functional, intuitive, and detailed hold points, yet remains uncluttered for optimal viewing and features 10 intensity levels with off positions between each setting.. Extra-low dispersion glass increases resolution and color fidelity. XR fully multi-coated lenses increase light transmission. Armortek coatings protect the lenses from scratches, oil, and dirt.. O-ring sealed and argon purged, the Viper delivers waterproof and fogproof performance while the single-piece, aircraft-grade aluminum construction gives shooters a durable platform..

Use this cantilever mount for mounting 30mm riflescope tubes.. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.574 40mm from the base.. Base Clamp Screws - 45-50 inlbs Ring Screws - 18 inlbs. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

Mounting rings are pushed forward 2 for better eye relief. Designed for mil-spec upper receivers with 1913 Picatinny rail. 6061 T6 extruded aluminum construction. MIL-A-Type 3 black hard-coat anodize. Ridged and lightweight Made in the USA.