Top 10 Best Vortex Venom Mount

Designed for Sig sauer P226, P2022 and to fit Ade rd3-001, rd3-02, rd3-009 and similar style mini Red dot sight such as sight mark mini shot Reflex sight. It is only designed for P226. If the rear sight of other Sig models are the same as the P226, it will fits. Such as P2022 fits too. This Red dot mounting plate basically replaces the rear sight slot. Made using the highest quality materials. Attaches firmly to your firearm for sure performance in tactical situations. Replaces the Pica tinny mount packaged with the Red dot sight.

This Optic mount is designed to connect certain red dot optics to 1911 pistols with Novakdoes NOT fit Novak OVERSIZE rear sight cut. One of the advantage of this ADE plate over others is this optic plate has a CURVEDCONCAVED design that will sit flushwrap the top curved pistol slide on the top of the pistol. Many other plates are Flat design.. 1911s have several different rear sight dovetail cuts, such as ColtG.I. Standard, LPA, Novak standardtraditional and Novak Oversize rear sight. This ADE Optic Plate made by ADE is for Novak Standardtraditional rear sight ONLY. It does NOT fit any 1911 that does NOT has a traditional Novak rear sight. Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911 .22s.. Does NOT fit any Novak cut that is NOT GENUINEtraditionaltrue Novak rear sight cut, such as some Taurus 1911 and some Ruger 1911 who use Licensed Novak rear sight but created their own sizes cut.While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium, Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark MinishotCoreshot, Crimson Trace CTS-12001300 and similar red dots. Does NOT fit Trijicon RMR, DeltaPoint Pro, Shield type red dot footprint.. Installation screws are included for working with Vortex Venom, Burris Fastfire and ADE RD3. The screws provided might be too shorttoo long for some red dots that match the same footprintscrew hole of this plate, such as sightmark Mini Shot M Spec. We recommend going to a local hardware store such as ACE Hardware to get the right size. Please be prepared to purchase longershorter screw separately for other red dots brands such as Sightmark, Meopta, Doctor, Bushnell..

This brand new designed optic mounting plate made by ADE is to REPLACE the rear sight of certain Steyr A1 and A2 Handgun.. This Optic Plate is Compatible with S-A1 C-A1 M-A1 L-A1 M9-A1, L9-A2, C9-A2, M9-A2. Does NOT fit any other models that is not listed here.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..

This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.. This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

The ADE HM8 optic mount allows the user to mount a varieties of Red Dots at a 45 degree angle alongside your primary magnified optic for optimal aiming versatility when the situation gets up close and personal.. The ADE HM8 optic mount attaches to either side of a Picatinny rail to accommodate left or right handed shooters.. Compatible with Any red dot with footprint of with Doctor footprint, such as Vortex VenomViper, Burris Fastfire, ADE RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 red dots. Compatible with Any red dot with footprint of Triijicon rmr footprint, such as holosun 407c507c, ADE RD3-020, RD3-023. Also works with Holosun 407k507kESP red dots. Compatible with Any red dot with footprint of Shield RMSRMSc footprint, such as Leopold Deltapoint Pro, Sig Romeo Zero, Hex Wasp, Swampfox Sentinel.

Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for DoctorVenom type red dot.. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short... Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 battery. ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..

The ADE HM8 optic mount allows the user to mount a varieties of Red Dots at a 45 degree angle alongside your primary magnified optic for optimal aiming versatility when the situation gets up close and personal.. The ADE HM8 optic mount attaches to either side of a Picatinny rail to accommodate left or right handed shooters.. Compatible with Any red dot with footprint of with Doctor footprint, such as Vortex VenomViper, Burris Fastfire, ADE RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 red dots. Compatible with Any red dot with footprint of Triijicon rmr footprint, such as holosun 407c507c, ADE RD3-020, RD3-023. Also works with Holosun 407k507kESP red dots. Compatible with Any red dot with footprint of Shield RMSRMSc footprint, such as Leopold Deltapoint Pro, Sig Romeo Zero, Hex Wasp, Swampfox Sentinel.

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide with optic cut.. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium, Vortex venomviper, burris fastfire, meopta, shield, docter, insight Red dots.. This optic mounting plate also fits other red dot brands such as Vortex VenomRazorViper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmrholosunshield footprint red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury..

This adapter plate is designed to connect red dot sights to 1022.. This red dot sight fit ADE model RD3-006, RD3-009, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium red dot sights.. Also fit red dot sights such as Doctor, Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech mrds, Insight. Aircraft grade Aluminum in Matte black finish.. Mounting hardware comes with screws and allen wrench..

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

This plate is for Ruger 57 pistol ONLY, it does not fit any other pistols.. The plate is compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray, Trijicon RMRSRO, Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight and Holosun 407C507C. Screws are provided for Trijicon, Holosun 407C507C and ADE. The provided screws may NOT work other red dots listed. If not, we recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spike, Holosun 407k507k.. Precision machined out of 6061 aluminum. Weight .4oz.40grain ammo may be necessary for proper cycling due to heavy RMR sights.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. Compatible with ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Sig Sauer Standard P365 Handgun.. Only fits Sig Sauer standard P365 Model. It does NOT fit P365XL which is already Optics Ready.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..

This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.. This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

This brand new designed optic mounting plate made by ADE is to REPLACE the rear sight of certain Steyr A1 and A2 Handgun.. This Optic Plate is Compatible with S-A1 C-A1 M-A1 L-A1 M9-A1, L9-A2, C9-A2, M9-A2. Does NOT fit any other models that is not listed here.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..

this handy mount quickly attaches the venom red dot to your rifle while ensuring the correct lower 13 co-witness sight height.. the positive lock, one-handed operation makes it incredibly simple to use.. type iii hard-anodized machined aluminum construction keeps the package lightweight, tough, and durable.. Sport type Hunting.

Mount adapter for direct mounting of DocterNoblex standard red dots to Picatinny mounting platforms. Available in either VenomDocter, RMR, or Shield RMSRMSc407k507k standard footprint patterns. Refer to compatibility chart to confirm compatibility with your micro red dot.. Low profile mounting base with only 0.21 inches of rise between base of mount to red dot mounting surface. Includes all necessary mounting hardware, no gunsmithing required. All Monstrum products come with a lifetime guarantee.

For direct mounting of DocterNoblex standard red dots to Picatinny mounting platforms. Available in either VenomDocter or RMR standard footprint patterns. Refer to compatibility chart to confirm compatibility with your micro red dot.. Available in three different heights, measured from the base of the red dot to the base of the mount - Low Profile 1.4 inch, Medium Profile 1.5 inch, and High Profile 1.6 inch - providing precise positioning for your preferred setup. Precision machined from 6061 grade aluminum with lightening cuts to shave off excess weight. All Monstrum products come with a lifetime guarantee.

ABSOLUTE COWITNESS - Best for using Micro Red Dots on Modern Sporting Platforms - Also compatible with Vortex Venom and Burris Fastfire Red Dot Sights. CANTILEVER DESIGN - The angled, single-rail mount keeps the red dot forward for fast target acquisition. LIGHT WEIGHT - At only 1.1 oz, this is one of the lightest red dot risers out there. INSIDE THE BOX - Includes Allen wrench for tightening the riser to a picatinny rail. LIFETIME WARRANTY - AT3 Tactical stands behind its products. If you experience an issue, we will make it right..

The Venom 5-25x56 First Focal Plane MOA riflescope is built for long-range and competition with a 5-25x mag range built into a 34mm tube for a massive amount of turret travel 85 MOA max elevationwindage.. XD Optical System delivers impressive resolution, edge-to-edge sharpness and greatly reduces chromatic abberation. Fully multi-coated lenses provide superior light transmission for exceptional clarity and low-light performance.. The RevStop Zero System offers an easy to set, fast and reliable return to zero. Side knob parallax adjust allows quick and easy parallax adjustments with range numbers visible while in the shooting position.. EBR-7C reticle ensures subtensions are accurate throughout the mag range making it easy to measure and range targets.The fast focus eyepiece allows for easy reticle focusing while the included throw lever allows for fast transitions between magnifications. Nitrogen purged and o-ring sealed providing water and fogproof performance. Armortek coating protects the lenses from scratches and oil. The one-piece, aircraft grade aluminum, 34mm tube is shockproof, shrugging off recoil and other impacts..

The AD-22 Burris Fast Fire Mount was designed as a quick detach solution for the Burris Fast Fire 1,2 and 3 mini red dot optics. Also fits the Doctor mini red dot optics.. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize.. It features the Patented QD Auto Lock Lever system to accommodate both in spec and out of spec rail systems.. Does not require proprietary tools for adjustment. Can be adjusted with your finger or a flat blade screwdriver. Lever can be configured to lock to the front or the rear. Superior clamping surface to insure maximum rail engagement.

Sport type Climbing. Ideal for shotguns, rifles and backup sight applications. This is the mount only. Picture of red dot is to show what the mount pairs with.. Low Profile Mount.

The Viper Red Dot Sight has a super low-profile making it perfect for handguns with cut-out slides.. The Viper's low height allows it to co-witness with iron sights and the 6 MOA dot is easy to pick up and get you on target fast. Power and illumination controls are easy for shooters to access and adjust.. The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while Armortek coatings protect your lens from oil, dirt, and scratches.. Hard anodized finish- highly durable low-glare matte finish. 1 MOA windage and elevation adjustments move the dot to your point of aim.. Waterproof and shockproof construction ensure your Viper Red Dot is ready for all conditions O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments..

TOPS Truglo Optic Plate System uses interchangeable base plates to fit a wide variety of micro dot optics from popular manufacturers. Mounts an additional optic for backup or close-range use. Mounts to firearms with Picatinny or Weaver-style rails. Ambidextrous design for versatile placement. Rated for all calibers up to 45-70 Government.

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.