Top 10 Best Vortex Venom Mounting Plate

The ADE HM8 optic mount allows the user to mount a varieties of Red Dots at a 45 degree angle alongside your primary magnified optic for optimal aiming versatility when the situation gets up close and personal.. The ADE HM8 optic mount attaches to either side of a Picatinny rail to accommodate left or right handed shooters.. Compatible with Any red dot with footprint of with Doctor footprint, such as Vortex VenomViper, Burris Fastfire, ADE RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 red dots. Compatible with Any red dot with footprint of Triijicon rmr footprint, such as holosun 407c507c, ADE RD3-020, RD3-023. Also works with Holosun 407k507kESP red dots. Compatible with Any red dot with footprint of Shield RMSRMSc footprint, such as Leopold Deltapoint Pro, Sig Romeo Zero, Hex Wasp, Swampfox Sentinel.

This plate is for Ruger 57 pistol ONLY, it does not fit any other pistols.. The plate is compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray, Trijicon RMRSRO, Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight and Holosun 407C507C. Screws are provided for Trijicon, Holosun 407C507C and ADE. The provided screws may NOT work other red dots listed. If not, we recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spike, Holosun 407k507k.. Precision machined out of 6061 aluminum. Weight .4oz.40grain ammo may be necessary for proper cycling due to heavy RMR sights.

This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.. This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XDM, XDS Pistol. Does not fit 5.25 XDM competition series. It is design to for Springfield Non-OSPNon Optics Ready XDXDSXDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It also fits Non-OSP Hellcat. It does NOT fit 5.25 XDM competition series. This new plate is an re-designed version to replace the old E1E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.. Fit Ade RD3-006AHuracan, RD3-006BCobra, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot.. There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.. Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for instsallation. Including two align pins to attach to any of the four corner holes to prevent any movement..

Designed for Sig sauer P226, P2022 and to fit Ade rd3-001, rd3-02, rd3-009 and similar style mini Red dot sight such as sight mark mini shot Reflex sight. It is only designed for P226. If the rear sight of other Sig models are the same as the P226, it will fits. Such as P2022 fits too. This Red dot mounting plate basically replaces the rear sight slot. Made using the highest quality materials. Attaches firmly to your firearm for sure performance in tactical situations. Replaces the Pica tinny mount packaged with the Red dot sight.

Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.33.8 Single Stack, XDM, Hellcat Non-OSP Pistol. It does NOT fit 5.25 XDM competition series, it does NOT fit any OSP optics ready models. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. Zantitium RD3-015 Red Dot. New advanced battery technology gives up to 3000 hours on bright setting and up to 40k hours on Low setting with a CR2032 BatteryIncluded. The biggest handgun sight on the market Actual size is. 2.25 Length x 1.4 Width x 1.27 Height.For reference, vortex venom is 1.9Lx1.11Wx1.02H. It gives up to twice bigger window than other micro red dot.. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.

This Optics Mount Plate is designed to connect Optics Red Dot Reflex Sight to Ruger SR22 Pistol by Replacing the Rear Sight with this Optic Mounting Plate. Designed for Ade RD3-006, RD3-009, rd3-012, RD3-013, RD3-015 and similar style mini Red dot sight such as Sightmark Mini Shot, JPoint, Shield Sight Reflex Mini Sight, Vortex Viper, Vortex Venom, and Burris FastFire.. Attaches firmly to your firearm for sure performance in tactical situation. Made using the aircraft aluminum with hard anodizing coat.. Comes with 2 years warranty by Ade Advanced Optis, an Oregon based company since in 2010.

This optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith Wesson handguns. This mounting plate fits SW Smith Wesson MP Full Size, MP 2.0 Full Size, MP 22 Full Size, MP Compact, MP 2.0 Compact, SD9VE,SD40VE, MP Shield. This mounting plate does NOT fit Smith Wesson MP C.O.R.E Series Already optics ready, MP Shield EZ .380, MP .22 Compact, SW9VE, SW40VE, Sigma. This mounting plate fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots..

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

This mounting plate is designed to connect red dot sights to Ruger Mark I, II, III, IV, IV-Lite, 2245 pistol. For Mark I and II, confirm it has drilledtapped holes. Plate will not work without holes.. Mounting hardware comes with screws and allen wrench. For Mark I and II, confirm it has drilledtapped holes. Plate will not work without holes.. Also fit Doctor, Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech mrds, , Insight red dots.. Mounting hardware comes with screws and allen wrench. We are learning that depending on the date of production batches of the ruger mark series, some pre-drilled holes are slightly shortershallower. If so, please contact us, we will send you shorter screws. We are in the process of adding shorter screws, but it is not factory included til next production.. This optic plate is designed to attach to the two existing holes on the top of Ruger Mark Slide. No need to replace the rear sight and allowing user to co-witness the rear sight..

This Optics Mount Plate is designed to connect Optics Red Dot Reflex Sight to Ruger Security 9 full size and compact size pistols by Replacing the Rear Sight with this Optic Mounting Plate.. Attention This Ruger Security 9 optic plate does NOT fit Ruger SR9 pistol. Ruger SR9 and Ruger Security 9 are completely two different pistols. Torque screw to 15inchlb. For gun glue, we recommend to use loctite treadlocker. This plate fits Vortex ViperVenom, ADE RD3-003,RD3-006, ADE RD3-009,RD3-012and Pro,RD3-015and Pro, RD3-028, RD3-018 Spike, , DocterNoblex Sight C, DocterNoblex sight 2, DocterNoblex sight III,QUICKsight 5.0 VR, Noblex Sight G,Burris Fastfire 2, 3, Delta Optical MiniDot,Delta Optical MiniDot II,Hawke Reflex,Sightmark Mini Shot Pro Spec,Mini Shot M-Spec,Leica Tempus, MAKdot, Vector Optics SCRD-19II Frenzy,Creative XP GlassEagle HD, HEX Dragonfly,CT RAD Pro, Cyelee CALF V2,Vomz Pilad.. Also fits Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 125, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 125, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 120.. Comes with several pairs of screws for ADE, Shield, Holosun, Vortex, Burris red dots. The screws should fits most of the listed red dot but not guaranteed for every red dot. If you need the longershorter screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

This brand new designed optic mounting plate made by ADE is to REPLACE the rear sight of certain Steyr A1 and A2 Handgun.. This Optic Plate is Compatible with S-A1 C-A1 M-A1 L-A1 M9-A1, L9-A2, C9-A2, M9-A2. Does NOT fit any other models that is not listed here.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..

This adapter plate is designed to connect red dot sights to 1022.. This red dot sight fit ADE model RD3-006, RD3-009, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium red dot sights.. Also fit red dot sights such as Doctor, Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech mrds, Insight. Aircraft grade Aluminum in Matte black finish.. Mounting hardware comes with screws and allen wrench..

This Optic mount is designed to connect certain red dot optics to 1911 pistols with Novakdoes NOT fit Novak OVERSIZE rear sight cut. One of the advantage of this ADE plate over others is this optic plate has a CURVEDCONCAVED design that will sit flushwrap the top curved pistol slide on the top of the pistol. Many other plates are Flat design.. 1911s have several different rear sight dovetail cuts, such as ColtG.I. Standard, LPA, Novak standardtraditional and Novak Oversize rear sight. This ADE Optic Plate made by ADE is for Novak Standardtraditional rear sight ONLY. It does NOT fit any 1911 that does NOT has a traditional Novak rear sight. Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911 .22s.. Does NOT fit any Novak cut that is NOT GENUINEtraditionaltrue Novak rear sight cut, such as some Taurus 1911 and some Ruger 1911 who use Licensed Novak rear sight but created their own sizes cut.While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium, Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark MinishotCoreshot, Crimson Trace CTS-12001300 and similar red dots. Does NOT fit Trijicon RMR, DeltaPoint Pro, Shield type red dot footprint.. Installation screws are included for working with Vortex Venom, Burris Fastfire and ADE RD3. The screws provided might be too shorttoo long for some red dots that match the same footprintscrew hole of this plate, such as sightmark Mini Shot M Spec. We recommend going to a local hardware store such as ACE Hardware to get the right size. Please be prepared to purchase longershorter screw separately for other red dots brands such as Sightmark, Meopta, Doctor, Bushnell..

Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for DoctorVenom type red dot.. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short... Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 battery. ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..

Greatly reduces the chance of your red dot battery losing connection resulting in flickering or temporary loss of your RMR's reticle. The Rubber Plate create upward pressure ensuring a reliable battery connection.. Allows the red dots that have exposed electrics at the bottom coveredprotected. Works with ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. 100 MONEY-BACK warranty within 30 days of purchaseNO QUESTIONS ASKED. LIFETIME WARRANTY.

Greatly reduces the chance of your red dot battery losing connection resulting in flickering or temporary loss of your RMR's reticle. The Rubber Plate create upward pressure ensuring a reliable battery connection.. Allows the red dots that have exposed electrics at the bottom coveredprotected. Works with ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. 100 MONEY-BACK warranty within 30 days of purchaseNO QUESTIONS ASKED. LIFETIME WARRANTY.

This red dot sight fit ADE model RD3-006, RD3-009, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium red dot sights.. Also fit Doctor, Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech mrds, , Insight red dots.. Mounting hardware comes with screws and allen wrench.. Aircraft grade Aluminum in Matte black finish.. This adapter plate is designed to connect red dot sights to 1022..

This optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith Wesson handguns. This mounting plate fits SW Smith Wesson MP Full Size, MP 2.0 Full Size, MP 22 Full Size, MP Compact, MP 2.0 Compact, SD9VE,SD40VE, MP Shield. This mounting plate does NOT fit Smith Wesson MP C.O.R.E Series Already optics ready, MP Shield EZ .380, MP .22 Compact, SW9VE, SW40VE, Sigma. This mounting plate fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. Compatible with Holosun 407k507k, Shield RMSCRMS, Sig Romeo Zero, ADE RD3-018 SPIKE, RD3-021 NUWAScrew provided for ADE, Shield, Sig and Holosun. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as JPOINT4, Swampfox Sentine, CT1550, Riton X3 Tactix MPRD. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Trijicon RMRSRO, Holosun 407c507c, ADE RD3-006009012011013015019023.

This Optics Mount Plate is designed to connect Optics Red Dot Reflex Sight to Ruger Security 9 Pistol by Replacing the Rear Sight with this Optic Mounting Plate.. Attention This Ruger Security 9 optic plate does NOT fit Ruger SR9 pistol. Ruger SR9 and Ruger Security 9 are completely two different pistols. Torque screw to 15inchlb. For gun glue, we recommend to use loctite treadlocker. This plate fits Vortex ViperVenom, ADE RD3-003,RD3-006, ADE RD3-009,RD3-012and Pro,RD3-015and Pro, RD3-028, RD3-018 Spike, , DocterNoblex Sight C, DocterNoblex sight 2, DocterNoblex sight III,QUICKsight 5.0 VR, Noblex Sight G,Burris Fastfire 2, 3, Delta Optical MiniDot,Delta Optical MiniDot II,Hawke Reflex,Sightmark Mini Shot Pro Spec,Mini Shot M-Spec,Leica Tempus, MAKdot, Vector Optics SCRD-19II Frenzy,Creative XP GlassEagle HD, HEX Dragonfly,CT RAD Pro, Cyelee CALF V2,Vomz Pilad.. Also fits Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 125, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 125, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 120.. Comes with several pairs of screws for ADE, Shield, Holosun, Vortex, Burris red dots. The screws should fits most of the listed red dot but not guaranteed for every red dot. If you need the longershorter screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Wrong Inventory fixed, customer will receive correct footprint for RMS, not RMR. This optic picatinny mount made by ADE is to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. Designed to use on ADE RD3-018 SPIKE, RD3-021 Nuwa, RD3-030 Apollo, Shield RMSRMScRMSwSMS and Romeo Zero Red dot sights.. Also Compatible with Leupold Delta Point Pro, JP Enterprises JPoint and Swampfox Sentinel, Vortex Defender-CCW, Bushnell RXC-200 Ultra-Compact red dot sights. Finished in a Matte Black Anodize. Comes with two screws. Does NOT compatible with Holosun 407k507k, user MUST grindlots of grinding to completely REMOVEFlat out the two rear pin to fit 407k507k. Ade has is releasing a new plate made specifically for 407k507k, please search amazon item numberAsin B09TMPGHRL.

Greatly reduces the chance of your red dot battery losing connection resulting in flickering or temporary loss of your RMR's reticle. The Rubber Plate create upward pressure ensuring a reliable battery connection.. Allows the red dots that have exposed electrics at the bottom coveredprotected. Works with ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. 100 MONEY-BACK warranty within 30 days of purchaseNO QUESTIONS ASKED. LIFETIME WARRANTY.

This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.. This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.. Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero.. Fits Vortex Venom Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics. Also Fits Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red dots, if so, simply trim cut the hole bigger. Does NOT fit Trijicon rmr, Shield, Sig Romeo, Holosun red dots. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree..

Optic Shim is made to fit between the red dot and the mounting plate.. Fits Shield RMSRMSCRMSWSMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel Red dot Sight. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics. Does NOT fit Trijicon RMRSRO, Doctor, Vortex VenomViper, Burris Fastfire, ADE RD3-006009012013. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. .. Scope base shims Tolerance -.005 Taper 1.0 degree.

Designed for Colt 1911 such as -22 to fit Ade rd3-001, rd3-02, rd3-009 and similar style mini Red dot sight such as sight mark mini shot reflex sight. It fits Colt 1911. Covered under Warranty for life. Made using the highest quality materials. Attaches firmly to your firearm for sure performance in tactical situations. Replaces the Picatinny mount packaged with the Red dot sight.

This optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith Wesson handguns. While it is possible to install this mount without the use of a gunsmith, we recommend hiring a qualified gunsmith. Please note. Unprofessional installation will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. This mounting plate fits SW Smith Wesson MP Full Size, MP 2.0 Full Size, MP 22 Full Size, MP Compact, MP 2.0 Compact, SD9VE,SD40VE, MP Shield. This mounting plate does NOT fit Smith Wesson MP C.O.R.E Series Already optics ready, MP Shield EZ .380, MP .22 Compact, SW9VE, SW40VE, Sigma. Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSROScrews provided for Trijicon and ADE. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spke..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. Compatible with Holosun 407k507k, Shield RMSCRMS, Sig Romeo Zero, ADE RD3-018 SPIKE, RD3-021 NUWAScrew provided for ADE, Shield, Sig and Holosun. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as JPOINT4, Swampfox Sentine, CT1550, Riton X3 Tactix MPRD. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Trijicon RMRSRO, Holosun 407c507c, ADE RD3-006009012011013015019023.

Optic Shim is made to fit between the red dot and the mounting plate.. Fits Shield RMSRMSCRMSWSMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel Red dot Sight. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics. Scope base shims Tolerance -.005 Taper 1.0 degree. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree.. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSROScrews provided for Trijicon and ADE. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spke..

New design in 2020. This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XDM, XDS Pistol. Does not fit 5.25 XDM competition series. It is design to for Springfield Non-OSPNon Optics Ready XDXDSXDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It also fits Non-OSP Hellcat. It does NOT fit 5.25 XDM competition series. This new plate is an re-designed version to replace the old E1E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.. Fit Ade RD3-006AHuracan, RD3-006BCobra, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot.. There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.. Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for instsallation. Including two align pins to attach to any of the four corner holes to prevent any movement..

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Steyr A1 Handgun.. compatible with S-A1 C-A1 M-A1 L-A1 M9-A1. Fitment on A2 is not guaranteed due to different Rear sight dovetail dimension.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..

This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Sig Sauer Standard P365 Handgun.. Only fits Sig Sauer standard P365 Model. It does NOT fit P365XL which is already Optics Ready.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide with optic cut.. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium, Vortex venomviper, burris fastfire, meopta, shield, docter, insight Red dots.. This optic mounting plate also fits other red dot brands such as Vortex VenomRazorViper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmrholosunshield footprint red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury..

Version 3 modified the dovetail to make it more sturdy and easy to install. Precision CNC Machined from 6AL4V aerospace grade Titanium with black PVD finish.. 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.. Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.. 100 MONEY-BACK warranty within 30 days of purchase NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.

Compatible with Glock vortex venom viper burris fastfire ade NOT FIT Counterfeit sights. Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.. 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.. Precision CNC Machined from 7075T6 Aluminum with Black anodized finish.. 100 MONEY-BACK warranty within 30 days of purchase NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.

Easy to install -- Replace the rear sight slot with mini red dot base plate Caution NOT fits for RMR, RMS, DOCTOR.Size 1.81X1in. Pistol mount plate fits G17 19 22 23 26 27 31 34 35.. Suitable Mini Red Dot Sight -- Fits Vortex ViperVenom micro red dot sight, designed for rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight.. Special Pistol Mount -- Fits Burris Fastfire micro red dot sight Notes the screws included are not long enough for some Burris red dot, pls use the screws in the red dot.. Highest Quality Material -- Full metal, heavy duty, made of 6061 T6 aluminum alloy in durable black matte finish..

Glock red dot base plate fits for Glock 17 19 22 23 26 27 34 35 37 41. This highly durable, lightweight, low profile.. This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight Fits Vortex. ViperVenom micro red dot sight. Fits Burris Fastfire micro red dot sight Notes the screws included in the package are not long enough for some Burris red dot sights, you can use the screws in the red dot. Replace the rear sight slot with mini red dot base plate. Note Not fit for RMR, RMS, DOCTOR.. Attaches firmly to your firearm for sure performance in tactical situations..

COMPATIBLE WITH Springfield XD, XD MOD.2, XDS, XDM, Pistol. NOT FIT 5.25 XDM competition series and ALL OSP Models. Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.. Update to 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.no more need shim Installation hardware and tools included.. Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodized finish.. 100 MONEY-BACK warranty within 30 days of purchase NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.