Top 10 Best Water Heater Mixing Valve

Twinkle Star 34 Inch Isolation Kit involves hot and cold valves 500WOG with 14 red and blue handles for easy identification and use. Integrated drain valve with brass safety cap for easily maintenance. Equipped with full port ball valve for better flow rate.. Superior Integrated Design This complete kit made from lead free heavy duty brass for years of usage. One-piece forged brass body effectively prevents any leakage or dripping. The main isolation valve set is factory tested to be leak-free so that your heater can be maintained periodically during each flushing sequence.. Certification The components are certified lead free. You will also find CSA certifications on the water flex and the gas flex as a proof of their authenticity. Meets all federal state standards for lead levels in drinking water system components.. Widely Use The tankless kit works with all 34 inch size is suitable for most U.S. residential usage, both residential and commercial gas tankless water heater brand such as Noritz, Rinnai, Rheem, Takagi, Navien and so on..

HOT WATER TANK BOOSTER Water heater booster with temperature actuated mixing valve and gauge mixes hot water with cold to deliver tempered water at a controlled temperature works with gas, power vent, electric, and tankless heaters. PROVIDES SAFE TEMPERATURE Water heater booster helps to prevent injury from scalding when showering by regulating the temperature output to 120 degrees F 49 degrees C can be turned up to a purifying 140 degrees F 60 degrees C. EASY TO INSTALL Anti scald mixing valve features innovative push to connect technology to allow for easy installation with PEX pipe, PE-RT, CPVC, and copper no soldering, glue or crimping necessary. LEAD FREE Thermostatic mixing valve with gauge is composed of strong and sturdy lead free DZR brass. CERTIFIED Shower mixing valve is certified for both residential and commercial applications ASSE 1017 and 1070 listed, CSA B125.3 listed, NSFANSI 372 and NSFANSI 61 certified.

Application 90029 Mixing Valve Fit for Atwood XT Series Water Heaters Compatible with most RV water heaters. Premium brass body Made of Solid Brass, tough and well made, corrosion resistance, reliable use, no need to worry about fracture and longer service life, Is your ideal choice. Features Screen trainer Filter traps incoming sand, dust, rust or other sediment particles, effectively preventing water damage, solve the blockage and make your water heater work normally. Easy Installation Mixing Valve All three fittings are 12 MPT Simple to use, can be connected to the Water Heaters manually without tools, helps make installation smooth and leak-proof, This is a high-quality tool and you will be pleased with your purchase. 100 Satisfaction Guarantee If you're not 100 satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support 12-Month Warranty.

CASH ACME THERMOSTATIC MIXING VALVE This Cash Acme Thermostatic Mixing Valve mixes hot water with cold to deliver tempered water at a controlled and safe temperature of 120 degrees F ideal for working in tight spaces. COMPATIBILITY This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings. DURABLE AND HIGH QUALITY Mixing valves are composed of durable lead-free brass for long-lasting reliability. EASY TO INSTALL The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required remove using a disconnect clip or disconnect tongs. SPECS Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.

Thermostat controls both hot and cold water. Adjustment cap with locking feature. Integral filter washers and check valves. Asse Listed 1070,1069, 1017.

US STANDARD FITTINGS -Coming with 3 PCS G12 British straight thread to 12NPT adapters.. Markings in fahrenheit,outlet water temperature range 68F -122F.. Premium brass body one-piece sturdy brass non-plastics faucet body ensures quality and longevity.. If you need temperature over 100F, just press the red button while rotating the valve. It's suitable for to pipe water valve, use for wash basin, bidet, shower, bathroom, washroom, kitchen, wash and etc..

CASH ACME THERMOSTATIC MIXING VALVE This triple-listed thermostatic mixing valve delivers water at a safe 120 degrees F or lower from all outlets, while allowing the water heater to be set at 140 degrees F or higher. COMPATIBILITY This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings. DURABLE AND HIGH QUALITY Mixing valves are composed of durable lead-free brass for long-lasting reliability. EASY TO INSTALL The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required remove using a disconnect clip or disconnect tongs. SPECS Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.

CASH ACME THERMOSTATIC MIXING VALVE This triple-listed thermostatic mixing valve delivers water at a safe 120 degrees F or lower from all outlets, while allowing the water heater to be set at 140 degrees F or higher. COMPATIBILITY This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings. DURABLE AND HIGH QUALITY Mixing valves are composed of durable lead-free brass for long-lasting reliability. EASY TO INSTALL The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required remove using a disconnect clip or disconnect tongs. SPECS Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.

34 Aqua-Gard thermostatic mixing valve supplied with three female copper sweat tailpieces and union nuts. Installs at the potable water heat source. Inlet strainers and check valves included. Low-lead law compliant.

DO YOU WANT TO SET YOUR WATER BOILER AT 140 F SO YOU CAN KILL HARMFUL BACTERIA BUT ARE WORRIED ABOUT CHILDREN GETTING SCALDED TEMLOCK thermostatic mixing valve allows you to set your water heater at 140 F. Then simply set the valve at the safe temperature of around 120 F.. DO YOU WANT THE WATER TEMPERATURE OF YOUR SOLAR HOT WATER SYSTEM TO BE MORE CONSTANT TEMLOCK thermostatic mixing valve will help you maintain hot water temperature to your desired temperature, for example 120 F.. ARE YOU ALWAYS RUNNING OUT OF HOT WATER BUT CANNOT INSTALL A LARGER TANK TEMLOCK thermostatic mixing valve allows you to keep your current boiler. Simply set your water heater at higher temperatures and set the thermostatic mixing valve at the safe temperature of around 120 F. With these settings, the valve will use less hot water from your boiler . DO YOU NEED TO CONTROL THE WATER TEMPERATURE IN YOUR PEX RADIANT FLOOR HEATING OR OTHER HYDRONIC APPLICATIONS No worries Use TEMLOCK thermostatic mixing valve to set water temperature to your desired level.. TEMLOCK TEMPERATURE ACTUATED MIXING VALVE IS DESIGNED FOR CONTROLLING IN-LINE WATER TEMPERATURES IN DOMESTIC HOT WATER SYSTEMS AND INSTALLED AT THE HOT WATER SOURCE, INCLUDING BOILERS, SOLAR WATER HEATERS, AND RADIANT FLOOR HEATING SYSTEMS. TEMLOCK mixing valve is not intended to be installed at point-of-use such as sinks or showers..

Thermal Thermostatic Mixing Valve The thermostatic valve is equipped with a thermal element to adjust the water inlet ratio of the cold and hot water, so that the outlet water reaches the set temperature. As long as the temperature is set with the top knob, the outlet water temperature will always remain constant.. Scald-proof Design If you want to set the temperature higher than 38, you need to press the safety button, which prevents scald caused by knob over-turning. When the temperature of the hot water is higher than 40, if the cold water flow is suddenly interrupted, the hot water inlet will be automatically closed after 3s to prevent scald.. Solid One-piece Brass Structure The thermostatic mixing valve is made of solid and durable brass for a long service life, and the one-piece structure ensures that water leakage will never happen. Both the cold water inlet and the hot water inlet have a mesh filter to prevent the inside of the valve from being clogged by dirt.. Performance Parameters The working pressure range of the thermostatic valve is 0.03Mpa-1Mpa 0.3Kg-10Kg, the ideal working pressure 0.1Mpa-0.5Mpa 1Kg-5Kg , the cold water temperature 5-29, the hot water temperature 30-99, the temperature adjustment range 20-50C, and the temperature control accuracy 2C.. Universal G12 Thread Interface With a specification of DN15 G12 British straight thread, the thermostatic valve is compatible with most pipe water valves, suitable for faucets, washbasins, bidets, showers, etc. It is an ideal scald-proof pipe accessory for bathrooms, toilets, kitchens, and more..