Top 10 Best Weight Bench Safety Bar Catches

BUILT TOUGH Made with 10 11-gauge steel welded to a 3-sided face plate, these safety catches offer the security grip needed when using the CAP Barbell FM-905Q Series FM-CS7000F rack. Peg diameter is 38 or 9. 5mm. Fits on 2x2-inch tubular frame. HEAVY-DUTY With a maximum static weight capacity of 500 pounds and 10 11-gauge steel construction, these catches safely support heavy loads. Durable powder coat finish helps prevent rust and corrosion. Catches sold separately not included with rack.. ADJUSTABLE Easily adjust safety catches to preferred height for squats or bench presses. Simply twist pull spotter arm insert into desired height. Reinforced with rubber padding to reduce weight room noise protect the finish of your bar.. DEPENDABLE 16-inch length of these spotter arms provides support needed when going heavy. Welded end caps prevent bar from rolling or slipping off the safety arms. Included Components 2 Spotter Arms. Sport Type Weightlifting Exercise Fitness.

STURDY TRIPOD BASE 12-Gauge Steel Frame for extra stability while lifting heavy loads Rubber base caps prevent movement of bench during exercise and to better protect gym floors.. DUAL-LAYERED PAD- High density, dual-layer, vinyl bench pad designed for optimal comfort under intense stress. 47.5 x 11 x 2.5 Tapered back pad design 9.5 allows the shoulders and arms a better range of motion while performing a bench press.. STRIKER PLATE- Dual position solid steel striker plate positions for bar support. Powder coated to prevent scratching after repeated use. Height from the bench to first bar catch, 16 Height from bench to second bar catch, 21.. SAFETY CATCH- Includes adjustable safety catches in the event the lift cannot be completed 7 position safety catch allows for a 6 adjustment range, up or down. Heavy duty built-in spotter stand for added safety and protection 18.5 x 12 .. ADDITIONAL- Meant for home gym and light-commercial use. Max weight load of 500 lb not including user. 3-year frame warranty, 2-year bench pad warranty, 1-year popper pin warranty. Arrives in 2 separate boxes..

NOT YOUR AVERAGE BENCH- This Competition Bench is as heavy-duty as it gets. Built with sturdy 3 x 3 steel uprights and a 4 thick vinyl bench pad, the BF-60 is meant for all athletes who love pressing heavy iron. IPF STANDARDS-Meets all International Powerlifting Federation IPF standards for a competition bench pressconfident when transitioning from training to competition mode.. MORE THAN A COMPETITION BENCH- With adjustable safety bars and 4 band pegs, you can mix up your training and attack sticking points at the mid and top end range of motion with the pin press or training with resistance bands.sold separately. DESIGNED WITH SAFETY IN MIND- The adjustable safety bars are a safety mechanism when lift cannot be completed, the J-hooks have 8 adjustable positions for the perfect racking height. The steel-plated spotter platform is 10 inches from the floor.. ADDITIONAL FEATURES-Measures 65 x 80x56' without the removable band pegs-when added, it measures 80 W. Max weight load -1,000 lbs. Features 4 adjustable storage pegs to rack and unrack Olympic plates and keep your gym organized. Arrives in 4 boxes..

HEAVY DUTY- Constructed of 12-gauge solid steel with 2 x 2 frame and a tripod base for added stability. Each foot is encased in a rubber base cap for added grip, stability, and floor protection. This bench is a must have lifting gift a new home gym.. DUAL LAYERED BENCH PAD- 3 thick, high-density, dual-layer, vinyl bench pad for optimal comfort under intense stress. Tapered back pad design contours from 11 to 9.5 to allow the shoulders and arms a better range of motion while performing a standard bench press.. STRIKER PLATE- Dual position solid steel striker plate for bar support. Powder coated to prevent scratching after intense repeated use. Low and high bar catch, which are 36 and 42 from the floor, respectively.. SPOTTER STAND- Reinforced, sturdy, steel spotter plate measuring 18.5 x 12 built into frame. Structurally designed to safely hold spotter weight and make it easier to spot the user. Diamond plate design for added grip.. ADDITIONAL- Measures 18 from floor to the top of the bench pad allowing feet to stay firmly on the ground, with 44 of inside working space. Max weight load of 500 lb. Meant for light-commercial and home gym use. Warranty, 3-year frame and 2-year pad. Arrives in 2 separate boxes..

HEAVY DUTY- Constructed of 12-gauge 2 x 2 steel frame with telescoping uprights. Each foot of each stand encased with rubber end caps for stability and floor protection. Storage pegs add further stability when loaded. J-HOOKS- J-hook bar catch to rest the bar when not in use. Locking bar catch on J-hook locks bar in place while changing place to ensure user safety. SAFETY CATCH- Protects user in the event the lift cannot be completed. Each safety catch measures 9.75 long and 1.75 wide. Protective rubber strip to protect bar from scratching. ADJUSTABLE- 9 adjustable positions for uprights, 16 range of adjustments adjusts with popper pin. 12 adjustable positions for safety catch, 11 range of adjustments adjusts with locking pin. Height of unit ranges from 33.75 to 49.5. ADDITIONAL- 7 plate storage pegs allow for a clean and organized home gym. Designed specifically for bench press function. To accommodate standard Olympic barbell, stands should be placed 27.5 inches apart to bring total width of footprint to 56.5.

HEAVY DUTY- Constructed of 2 x 2, 12-gauge steel for strength and durability. 5 solid steel bar positions are welded for reinforced support to the body of the rack. Rubber end caps encase each foot of the base for stability and floor protection.. ADJUSTABLE SAFETY CATCH- Adjustable safety bar catches on both sides measure 10 in length are included in the event the lift cannot be completed. 6 adjustable positions ranging from 22. 5 to 32. Safety catches include 18 thick protective plastic. STORAGE PEGS- Includes 4 Olympic plate storage pegs 2 each side each measuring 8. 5 in length for an organized home gym while adding further stability to the unit.. BAR HOLDERS- 5 solid steel bar positions measuring 1 in diameter and 4 in length for racking the barbell during squats and bench press. Positions are 7. 5 apart.. ADDITIONAL- Can be used as a solo rack for squats or in conjunction with a utility bench for flat and incline bench press. Max weight load of 500 lb. Arrives in 2 separate boxes..

Heavy-Duty Construction Steel Construction Comprised of 12- and 14-Gauge Steel Thickness Overhead Workout Station Is Made With High Grade Tubular Steel. Durable Reliable 3-Step Powder Coat Finish for Exceptional Durability Gussets for Extra Reinforced Support Capped Frame Ends to Prevent Oxidation. Features 2 plate posts, 3 band posts on each side to add resistance, 2 j-cup bar catches, 2 safety catches, pull-up bar bar holders with ABS sleeves to prevent scratches when removingstoring an Olympic bar. Versatile Use this power rack to perform squats, deadlifts, pull-ups and more Incorporate an adjustable bench for added versatility. Specs Assembled DimensionsWxDxH 61.4 x 45.6 x 85 Max Weight Capacity 300 lbsBar Catches, 300 lbsPull Up Bar, 500 lbs Combined Min Barbell Shaft Length 47. Bands, weights other accessories not included.

8 adjustable heights with 2 step. Heavy duty, Two sides per unit. Top catch width - 16. Weights Bench shown for information only.. Size 17 x 20 x 23.5 to 35H.

PREMIUM STEEL CONSTRUCTION Constructed from rugged, foam, and vinyl to provide sturdy exercise gear for long usage, the surge bench is safe and comfortable. The construction is compact and stabilized to provide optimal support for daily workouts. DUAL-FUNCTION LEG DEVELOPER Dual-features include a pivot point that aligns with the knee joints and a locking mechanism for abdominal exercise, this unit facilitates proper body posture and allows for maximum effect on the targeted muscle groups.. SEAT SLIDING TRACK This exercise equipment boasts an adjustable seat and back pad with a slide track to conform to proper lifting positions. It allows you to achieve the enhanced benefits of an intense workout performed with precise body alignment.. WEIGHT PLATE STORAGE POSTS This complete system features an innovative structure that combines weight plate storage posts and Olympic sleeves. This multifunctional training gear allows you to easily store your two weight plates.. VERSATILE FITNESS EQUIPMENT Designed for full-body training at home, this surge bench can be utilized to target multiple muscle groups. It allows you to perform a wide array of strength-training exercises that focus on the arms, legs, chest, and core..

14-GAUGE 2MM STEEL CONSTRUCTION STOZM Barbell Rack is made of 14-gauge steel - thicker and stronger than other products on the market. The premium improved Adjustable Barbell Rack can support a high weight capacity of 770lbs 350kg. FOR ALL PHYSIQUES FITNESS LEVELS Take only 1 minute to adjust the barbell racks height width to fit your need. Simply loosen the knobs on the vertical horizontal bars, extend the square tubes, and then tighten the knobs. ALL-IN-ONE PRODUCT No need to invest in weight plate racks and barbell holders STOZM Squat Rack Stand features all built-in accessories for extra convenience, including 1x dip bar station, 4x weight plate pegs, and 2x barbell holders. STEADIER MORE BALANCED DESIGN The Squat Rack adopts safety knot technology, which keeps square tubes tightened to ensure no shaky movements. Ideal to combine with STOZM Weight Bench to perform inclinedecline bench press, shoulder press more. BUILD UP FULL-BODY STRENGTH Whether youre looking to bulk up, tone up or just get a few reps in here there, STOZM Barbell Rack is what you need for your home gym practice. Use it to strengthen your chest, arms, shoulders, abs, back, and legs.