Top 10 Best Wen 3921

Unique design accepts blades in two directions standard and 90 degrees to allow for infinite ripping capacity. Variable speed goes from 400 to 1600 strokes per minute. Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts. Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position. Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades.

Unique side panel flips open for easy-access blade changes. Variable speed goes from 550 to 1600 strokes per minute. Spacious 16-by-10-inch table bevels up to 45 degrees for angled cuts. Cuts wood up to 2 inches thick with a 16-inch throat depth. Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a dust port, a foot lock clamp, and three 5-inch blades.

Parallel-arm design combined with heavy duty steel construction limit vibration and reduces noise. Spacious 25-58-by-16-inch steel table bevels up to 45 degrees to the left and 30 degrees to the right. Dual side panels flip open for easy-access tool-free blade changes. Upper arm locks in raised position to allow for easy interior cuts and workpiece adjustments. Features a variable speed 1.6-amp motor, a flexible air pump, two 5-inch pinless blades, a tension release lever, a 1-12-inch dust port, an adjustable material hold-down clamp, a 34-inch stroke, and a two-year warranty.

Spiral cutterhead system utilizes 16 staggered HSS blades for an ultra fine finish. Features a spacious 33-by-8-inch table with support arms that extend up to 51 inches. Remove 0 to 18 of an inch of material with each pass. Adjustable 19-34 by 4-14-inch fence bevels up to 45 degrees.

Switch between gasoline 4750 surge watts, 3800 running watt and propane 4350 surge, 3500 running with the simple turn of the selection dial. Voltage easily goes from 120V to 240V, perfect for transfer switches and emergency backup. Electric start powers the 224cc 4-stroke OHV engine with the turn of a key. 4-gallon tank provides up to 11 hours of half load run time. Includes two 120V GFCI outlets 5-20R, a 120V240V NEMA 30A twist lock L14-30R, a 12V DC cigarette-lighter-style plug, a bottle of oil, a wheel and handle kit, a 47-inch LPG connection hose, and a 2-year warranty.

Switch between gasoline 11,000 surge watts, 8,300 running watt and propane 9,500 surge, 7,500 running with the simple turn of the selection dial. Voltage easily goes from 120V to 240V, perfect for transfer switches and emergency backup. Electric start powers the 457cc 4-stroke OHV engine with the turn of a key. 6.6-gallon tank provides up to 8.5 hours of half load run time. Includes four 120V GFCI outlets 5-20R, a 120V 30A twist lock outlet L5-30R, a 120V240V 50A outlet NEMA 14-50R, a 12V DC cigarette-lighter-style plug, a bottle of oil, a 47-inch LPG connection hose, and a two-year warranty.

Dimensions 23.2 L x 18 W x 20.1 H Weight 99.2 lb. EPA III and CARB Compliant. 212cc 4-stroke OHV engine produces 3800 surge watts and 3400 rated watts with a half-load runtime of up to 8.5 hours. Fuel shutoff maximizes the generators lifespan by using up the remaining fuel in the carburetor before shutting down. Produces clean power to prevent damage to sensitive electronics such as smart phones, tablets and laptops. Includes two three-prong 120V receptacles, one AC 120V NEMA TT-30R RV receptacle, one 12V DC receptacle, one 5V USB port, a digital load and fuel display.

Ultralight body weighs in at a mere 39 pounds for easy transport and storage. Extremely quiet operation comparable to the sound of a normal conversation according to the US Department of Health and Human Services. Produces 2000 surge watts and 1700 rated watts of clean power for safe charging of sensitive electronics phones, tablets, televisions, computers, etc.. Fuel shutoff maximizes the generators lifespan by using up the remaining fuel in the carburetor before shutting down. Includes two three-prong 120V receptacles, one 12V DC receptacle, two 5V USB ports, and a two-year warranty.

Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish. Features a spacious 30-by-6-inch table. Remove 0 to 18 of an inch of material with each pass. Adjustable 19-34 by 4-14-inch fence bevels up to 45 degrees.

Axial glide system The patented glide system allows wider cross cuts and better alignment while also being compact This saves you 12 inch of valuable work space Bosch glide miter saw also offers unmatched smoothness of cut. Capacity Expanded cutting capacity 14 inch horizontal capacity nominal 6 12 inch vertical capacity against the fence base 6 12 inch crown capacity against the fence 45 spring. Adjustable The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles Bevel detents 0, 33.9 degree, 45 degree leftright for accurate cuts Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum. Precision Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lockunlock to slide fence for added support. Ease of use Upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.