Top 10 Best Winter Cocoon Fan For Wood Stove

Heat powered - no batteries or electricity required.. Efficiently circulates warm air throughout the room.. Less consumption, more efficiency.. Innovative and durable design.. Silent operation.

Upgrade Version Fireplace Fan--Less consumption, more efficiency. This heat powered stove fan tested and proven to save 28 fuel cost, improved warm air circulation results in greater comfort, and reduce wood consumption from your stove.. Premium Quality--Made with high-temperature resistant anodized aluminum, The stove fan is designed for usage on freestanding stoves with a normal surface temperature of between 80-345176-653.. Overheat Protection DesignThe Cocoon fan with The radiator temperature display bar can monitor the radiator temperature in real-time. When it displays 60C 140F, the fan needs to be removed from the top of the fireplace to avoid the motor damage, ensure the long life of the fireplace fan.. Eco-friendly--Heat Powered, the stove fan generates its own energy by the heat from the stove surface, no batteries or electricity required, and can efficiently circulate warm air throughout the room.. Whisper Quiet--Newly designed blade, larger air volume, lower noise. The moving part is the blades assembly, so the working noise is below 32DB. You will enjoy the warm air in a quiet and comfortable environment.. Easy Operation Friendly Service--No assembly needed, just put on the top of the stove, the fan will spin with the temperature getting higher. We can provide a 30-day refund service and after-sales protection of up to 6 months. If you have any questions, please contact us..

Eco-friendly - The wood stove fan will help reduce the fuel consumption and make the room warmer quickly.Spread heat around room and increase temperature, improve warm air circulation results in greater comfort and reduce wood consumption from your stove.. No Power Required - Fireplace fans powered by heat.The wood pellet fan converts heat into electricity by means of a heat-conducting plate at the bottom to achieve rotation.No fire hazards. And the fireplace fan automatically adjusts its rotation speed with the temperature of the surface of the stove.. Very Silent - The only moving part is the blade assembly.The noise of the silent heat powered wood stove fan is less than 25db, you don't even know where the fan is, but you still feel warm.You can enjoy the warm air in a quiet and comfortable environment.Please do not touch it directly with your hands when running work.. Upgraded 4-Blade - Heat powered stove fans are widely used in wood-burning stoves, gas stoves, pellet stoves, etc. The recommended surface temperature is between 122F-644F 50C-340C.No assembly is required, just place the fireplace fan on top of the furnace and the heat fan will spin as the temperature rises.. NOTE - This unique stove fan is designed to be placed on your wood stove to make efficient air circulate indoors quickly and efficiently.Starts when the surface temperature at the top of the fireplace reaches about 50C 122FIt does not provide strong wind power like ordinary fans.If the max temperature on your stove top is even below 100C 212F, DO NOT buy, the fan will can't works efficiently..

2021 Upgrade 6-Blade Stove FanOur OCHOR stove fan composed of 6 blades,can produce more warm air and improve the efficiency of the product. It is widely used in wood stove, gas stove, Log Burner, Fireplace etc. With thermometer can detect the working temperature at any time to ensure the safety of the furnace.. No electricity The stove fan no need electricity or battery,powered by heat. Healthy and economical,Wood Stove Fan for Log Burning Fireplaces,gets power from the heat produced by your fireplace, wood-burning stove or pellet stove. Effectively dispersing warm air around your room.. Whisper QuietNewly designed blade, larger air volume, lower noise. The moving part is the blades assembly, so the working noise is below 32DB. It will not interrupt your reading, work and other activitiesyou can enjoy the warm air in a quiet and comfortable environment.. Start automaticallyStart work when the surface temperature under the fan reaches around 50122,working with a temperature between 50122 centigrade degree to 350662 centigrade degree. The higher temperature of the stove, the faster the blades spin. Slow down and stop as the stove cools.. More efficiencyFully utilize the heat from your wood stove and disperse it to your room. The 6-Blades fan circulates warm air at a rate of 290 CFMcubic feet per minute, and uses 30 less wood. You can enjoy warmth in you room,increasing your comfort.. Safety designOur fan has an overheat protection deviceThe fan comes with a bimetallic safety device in the base of the fan.When the surface temperature rises above around 250, it will gently lift the front of the fan to protect the TEG and motor. The fan will automatically recover normally as the surface temperature decreases.. Eco-friendlyHeat Powered, the stove fan generates its own energy by the heat from the stove surface, no batteries or electricity required, and can efficiently circulate warm air throughout the room.. Unique blade designWorking quietly,more air flow.Feature with the unique blades design,The stove fan can drive more warm air with silent work.No noise You will enjoy the warm air in a quiet and comfortable environment.. Easy Operation No assembly needed, just put on the top of the stove, the fan will spin with the temperature getting higher.. Friendly ServiceWe provide a 30-day refund service and after-sales protection of up to 6 months. If you have any questions, please contact us..

Upgraded 5-Blade will provide larger air volume, diverting the warm air horizontally all around your house but not give you the hot wind directly. The way making it the most efficient way to heat your room from your stove, widely used for wood burning stove, gas stove, pellet stove and more. A magnetic thermometer included to monitor the temperature of your stove. No batteries or mains electricity required, the moelectric module acts as a small generator to power the fan's motor. The fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity. Silent operation, spread heat around room and increase temperature with low noise, improve warm air circulation results in greater comfort and reduce wood consumption from your stove. More stable and environmental protection. Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module. Recommended surface temperature is between 140F - 644F 60C - 340C. If the fan doesn't run in time after reaching the temperature, please move the blade slightly do not touch it directly with your hands. The maximum temperature that the product can withstand is 350-400 degrees. Exceeding this temperature may damage the motor. Please test the temperature of the fireplace before purchase and pay attention to monitoring the temperature change during use.

Essential Fireplace Accessories Heat Powered Stove fan help you save fuel and spread warmth to you.. No Noise Efficiently circulates warm air throughout the room without noise.. Overheat Protection - Built-in bimetal strip on the bottom of the fireplace fan raises the edge of the fan slightly when approaching the maximum operating temperature to protect the motor and thermoelectric module.. Simple Operation Place the fireplace fan in the correct position, wait until the fireplace fan absorbs heat to reach the starting temperature of 60, then the fireplace fan can run normally, while taking care not to exceed the maximum operating temperature of 360.. Technical Support - Frequently asked questions can be found in the user guide, if you still have any problems during use, please contact us directly for solutions..

Upgrade 5-Blade Stove Fan- The hot air stove fan with 5 blades can produce more warm air and improve the efficiency of the product. It is widely used in wood stove, gas stove, Log Burner, Fireplace etc. With electromagnetic thermometer can detect the working temperature at any time to ensure the safety of the furnace. Energy Efficient- No batteries or electricity required. It is driven by the heat generated by the fireplace or wood burning stove and conducts to the fan base to drive the blades. The higher temperature of the stove, the faster the blades spin. Overheat Protection- The built-in bimetal strip design at the bottom of the stove fan, when approaching the maximum operating temperature, the bimetal strip under the base will automatically bend to help raise the fan base and reduce the contact area of the heat source to protect the motor and the thermoelectric module. Silent Operation - The fan will work at less than 25db, which is very quiet. You will hear virtually no sound at all. And it improves the circulation of hot air in the room for greater comfort. Operating Temperature- The working temperature is about 50C-340C 122F-644F, and the fan speed will be automatically adjusted according to the temperature of the stove.

Start AutomaticallyUpgrade Technology,Reinforced 4 Blades,Faster Speed,Larger Air Volume.The heat powered stove fan is designed to circulate the warm air created by a wood coal or pellet burning.Efficiently circulates warm air throughout the room.. Eco-Friendly and Self-PoweredThermoelectric module acts as a small generator to power the fan's motor. No batteries or electricity required Improved warm air circulation results in greater comfort and reduce wood consumption from your stove.Stove operating with normal surface temperatures between 122F50C and 644F340C.Energy Class A. Whisper QuietNewly Designed Blade,Larger Air Volume,Lower noise.You don't even know the stove fan is there,but you feel the warmthYou will enjoy the warm air in a quiet and comfortable environment.. Safty DesignThe stove fan support is made with Anodized Aluminum, able to resist high temperature up to 662F350C, no deformation and no discoloration even after long time working under high temperature.. Longer LifetimeThere is a Bi-metallic safety device in the base of the fan.If the surface temperature rises above around 400F 200C,the safety device gently elevates the front of the fan to protect the TEG and motor..

Upgraded 4-Blade--Heat powered stove fans are widely used in wood-burning stoves, gas stoves, pellet stoves, etc. The recommended surface temperature is between 122F-644F 50C-340C.No assembly is required, just place the fireplace fan on top of the furnace and the heat fan will spin as the temperature rises.. No Power Required--Fireplace fans powered by heat.The wood pellet fan converts heat into electricity by means of a heat-conducting plate at the bottom to achieve rotation.No fire hazards. And the fireplace fan automatically adjusts its rotation. Eco-friendly--Heat Powered, the stove fan generates its own energy by the heat from the stove surface, no batteries or electricity required, and can efficiently circulate warm air throughout the room. Whisper Quiet-- Newly designed blade, larger air volume, lower noise. The only moving part is the blades assembly, so the working noise is below 32DB. You will enjoy the warm air in a quiet and comfortable environment. Silent and Easy Operation--No assembly needed, just put on the top of the stove, the fan will spin with the temperature getting higher. And the only moving part is the blades assembly, so the working noise is below 32DB, very quiet. 12 Months Warranty--Unconditional 12-month warranty on this fit tracker. Our Service Center will do our best to make you satisfied. Get yours now by clicking Add to Cart button on the right. From your review, Amazon do not provide the access to your order details, we don't have a chance to contact you to solve your issues. If you need any help please email me ..

Fan for stove works without batteries, ropes or electricity and is environmentally friendly. It generates its own energy thanks to the heat released by the surface of the stove. The base of the fan transmits the heat to the units of production of electricity and the units of electricity production convert the heat energy into kinetic energy. The energy necessary to drive the motor, then the blades turn.. Upgrade 4 blades and dispense warm air throughout the room. Simply place the stove fan on a flat, smooth surface on the top of your stove, near the side or back of the stovepipe. You must place the stove fan at least 4 inches from the stovepipe. This will work when the stove surface is hot.. Operating temperature 40C -340C 644F The fan rotates when the temperature reaches 40 C. The warmer the base of the fan, the faster the fan rotates, and the more the fan circulates in the room . It will slow down and stop while the stove is cooling down.. Anodized aluminum material The fan assembly is made of anodised aluminum, which will not rust and corrode if the fan overheats. A bimetallic safety device is installed at the base of the fan. If the surface temperature exceeds 300C, the safety device gently raises the front of the fan to protect the TEG and the motor.. Quiet work, no more airflow. Features with the unique design of the blade, the oven blower can drive more warm air with quiet operation. No noise. You will enjoy the warm air in a calm and comfortable environment..